Features:
Fuel Filter Element: 30 Microns with Protective Sheet
Height: 9.5”
Inlet/Outlet Size: 1” NPT
Flow Rate: Max 25 Gpm
Working Pressure: Up to 150 Psi
Gravity Flow Rate: Approximately 5 Gpm
**[COMPATIBLE WITH FUEL TYPE] Fits common fuels such as unleaded gas, diesel, fuel oil, up to 20% biodiesel
and related additives.
**[FUEL FILTER ELEMENT] Keeping a clean 496-5 filter in your vehicle can reduce damage done to your engine
and other fuel delivery components. 30 microns, provide high flow rates and superior filtration efficiency, protect fuels
from particles such as rust, sand, dirt and water. With protective sheet to prevent the filter element from being destroyed
or deformed by pressure.
**[TOP CAP] With 1\" NPT pipe fittings inlet and outlet marked at the top of the cap.
**[HYALINE BOWL] Use 495-4 fuel tank filter bowl, makes it easy to visual monitor the fuel flow, the fuel flow will
slow down when you need to replace the element. Drain valve installed at the bottom to drain water.
**[FEATURE] Flow rate max 25 gpm. Working pressure up to 150 psi. Gravity flow rate is approximately 5 gpm.
Installation:
Attach filter top cap to storage tank valve on opening marked “IN”
Attach hose and nozzle to filter opening marked “OUT”
When installing the element and bowl, apply a coating of oil to each side of gasket
These components should be hand tightened only. Over tightening of the filter bowl will result in difficulty in removal
at a later date
When assembly is complete, check for leaks
Package Including:
1x Fuel Tank Filter Assembly
