NOTE:Please double check local traffic rules before order, ice blue bulbs are illegal to use in some of the states.Specifications:
--Type: 9005, H11, H3 High Low Beam,Single Beam&Fog Beam
--Power: 80W/BULB
--Lumen: 8000LM/BULB
--Input Voltage: 8V-48V DC（fit 12v/24v car）
--Material: Aluminum PCB and PA66+30% GF Plastic
--Life Span: ＞50,000 hours
--Connector Type: Plug and Play
--Certifications: CE, RoHS, ISO9002, IP68.Beam Angle: 360°
--Color Temperature: 8000K Ice Blue
--Operating Temperature: -40℃ to +105℃
--Cooling Style: Built-in Fan Cooling and Aluminou Heat Dissipation
--Waterproof Grade: IP 68Features:
√ High-power chips, ultra-thin board shape design makes the installation and fit better, the illumination is more uniform, and avoids the disadvantages of poor illumination width caused by the point light source; Our Lights suitable for use with 12-30V voltage.Our Lights has the characteristics of light diffusivity, wide-angle illumination and high lumen;√ The LED has high luminous purity, no need for lampshade filtering, and the light wavelength error is within 5 nanometers√ There is no delay when the LED lights up, while the traditional tungsten bulb has a delay of 0.3 seconds.√ LED has low power consumption. When it reaches the same brightness of traditional bulbs, it consumes only 6% of traditional bulbs, and it also saves electricity and fuel!√ It has a long life, its filament-free structure does not generate heat, and it can be used for more than 6 years under normal conditions√ LED car lights can make the vehicle control circuit not easy to oxidize, with a maximum load current of 0.1A.
Two-way heat dissipation channel:
1.All-in-one aluminum profile as heat conduction system,360 degree heat radiating
2.High speed mute fan(12000R/Min),high Air flow for faster cooling rateInstall Caution:1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.2. Put the vehicle into park or make sure it is securely in gear.3. Be sure to turn off the ignition and remove the key.4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.Package Content:
2 x 9005 LED Lights Bulbs
2 x H11 LED Lights Bulbs
2 x H3 LED Lights Bulbs
