Tech Data: Thread Pitch: M12x1.5 · Lug Nut Height: 36 mm · Lug Nut Depth: 32 mm · Lug Nut Flange: 23 mm(0.9Inch) ? full specs belowFitment:Chevrolet:
Eagle:
Pontiac:
Saturn:
IMPORTANT FITMENT NOTICE: Check Before Ordering: ? seat: wheel needs a 60 degree cone face ? nut waist must clear the lug hole ? stud must not exceed the 32 mm closed depth ? compare size with an original nut first ? stock al? \'s chart confirms thread pitch only ? unsure? Message us and we\'ll verify fitment before you buy. ESPLUS Company Logo ESPLUS precision wheel hardware ESPLUS
Precision wheel hardware Store Home Hot Products response Exact specificationsThread, seat, size and quantity Fitment before claimsVehicle and wheel checks separated Listing-level termsShipping and returns stay current message supportApplication context stays together Lug Nuts Mag Seat OEM Lug Nuts Duplex Conical OEM Lug Nuts Regular Acorn Lug Nuts Long Acorn Lug Nuts Open End Lug Nuts Spline Lug Nuts Lug Bolts Ball Seat Lug Bolts Cone Seat Lug Bolts Wheel Locks Locker Lug Nuts Locker Lug Bolts Wheel Spacers Hubcentric Spacer with Ball Seat Bolts Hubcentric Spacer with Cone Seat Bolts Wheel Adapters 5 Lug Adapter 6 Lug Adapter 8 Lug Adapter 5 Lug Hubcentric Adapter 6 Lug Hubcentric Adapter Precision wheel hardware · Fitment-first specification Bulge Acorn Lug Nuts 1.4 in 60 Degree Cone Seat Closed End 3/4 in Hex Aftermarket Steel Wheel Lug Nuts A full set of bulge acorn cone seat lug nuts - the count for this listing is in the title - Made in Taiwan, 90-Day Warranty
[16] Chrome M12x1.5 Acorn Lug Nuts for 82-88 Chrysler LeBaron
Direct-fit upgrade for Chevrolet & Chrysler owners ? confirm your exact year and model in the compatibility chart below before ordering.Classic Bulge Acorn, 1.4 in TallDirect Swap For Tired Lug NutsFor Aftermarket + Steel WheelsCount For This Listing In TitleCheck Stud Vs 32 mm Depth Fitment-first engineering 01 · Order scopeConfirm the exact quantity.Use the listing title and the technical data as the order reference, not the vehicle photograph. 02 · Vehicle sideConfirm thread and application.Read the compatibility section and every fitment note before ordering. 03 · Wheel sideConfirm the actual wheel hardware.Match seat geometry, diameter, clearance, depth and usable thread engagement. Technical Data Numbers, not adjectives.
Every dimension your wheel cares about ? measured, verified, documented.
A M12x1.5 Acorn Lug Nut Type · Acorn 60 Degree Conical Lug Nut ×16 PCS/Set Thread PitchM12x1.5Lug Nut Height36 mmLug Nut Depth32 mmLug Nut Flange23 mm(0.9Inch)Lug Nut Seat60 Degree ConicalColor and FinishChromeDrive3/4\"Tool Requirement3/4\" Hex SocketMaterial MadeSCM Carbon SteelQuantity Per Order16 PcsCalifornia Prop 65 WarningWARNING: This product can expose you to chemicals including Nickel and Lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov. Vehicle Compatibility Fits your car.
Verified, not guessed.
Bulge acorn lug nuts with a 60 degree cone (tapered) seat for aftermarket and steel wheels, 1.4 in (36 mm) tall closed end; match the cone seat and the size of your original nuts.
5Brands 5Vehicles 2Regions NA United States 5 Featured Chevrolet United States · 1 models Stock Alloy Wheel Stock Steel Wheel Aftermarket Wheel Wheel with Cap ModelRegionYear Range Tornado Van MX 2022-Current Chrysler United States · 1 models Stock Alloy Wheel Stock Steel Wheel Aftermarket Wheel Wheel with Cap ModelRegionYear Range LeBaron MX/CA 1982-1988 Eagle United States · 1 models Stock Alloy Wheel Stock Steel Wheel Aftermarket Wheel Wheel with Cap ModelRegionYear Range Summit CA 1989-1996 Pontiac United States · 1 models Stock Alloy Wheel Stock Steel Wheel Aftermarket Wheel Wheel with Cap ModelRegionYear Range Acadian CA 1976-1987 Saturn United States · 1 models Stock Alloy Wheel Stock Steel Wheel Aftermarket Wheel Wheel with Cap ModelRegionYear Range Ion 2003-2007
Not sure? Message us ? we verify your exact year & model before you buy.
Product Display A closer look at the product.
Finish, geometry, and packaging — from every angle. Tap a thumbnail to view.
Check Before You Order Some fitment details only your vehicle can tell you.
The vehicle list above confirms your year, make and model. The points below are not part of that list — they depend on the wheels and hardware currently on your vehicle. Please verify them before ordering.
Why It\'s Built Different Performance you can torque down. Bulge Acorn Profile Covers The Lug Hole
The bulged base spreads a 23 mm (0.9 in) flange over the lug hole for full seat contact and a finished look on open wheels.
60 Degree Cone Seat Centers The Wheel
The tapered (cone) face self-centers each nut in the lug hole - the seat style most aftermarket and steel wheels take.
Closed End Keeps Weather Off The Studs
The capped 32 mm thread depth seals road spray away from the stud threads, so next season\'s rotation breaks loose clean.
Common 3/4 in Hex Drive
Drives with the 3/4 in socket found in most lug wrenches and roadside kits - no special key needed for routine service.
1.4 in Height Matches Common Acorn Sizing
36 mm (1.4 in) overall height - the size to verify against your original nuts for a straight swap.
SCM Carbon Steel Body
Solid SCM Carbon Steel holds vehicle torque specs through years of rotations without rounding at the hex.
How to Install 3 steps to torque.
Follow the sequence below ? fitment is everything, so read Step 1 carefully.
01 Hand-Start Every Nut
Clean the studs and hand-thread each nut several turns so the cone seat lines up square with the wheel before any tool touches it.
Stop if a nut binds early - forcing a misaligned nut damages the stud threads. 02 Snug In A Star Pattern
With the wheel hanging level, snug all fasteners in a star (crisscross) pattern so the cone seats center the wheel evenly on the studs.
Uneven tightening can leave the wheel sitting off-center on the studs. 03 Torque To Vehicle Spec
Torque each nut to your vehicle\'s wheel fastener spec with a 3/4 in hex socket and torque wrench, then recheck after the first drive.
A stud longer than the 32 mm closed depth will bottom out before the seat clamps. 01 / 4 4 photos in this guide — tap the arrows or dots to see every step Important Fitment Notice Check Before Ordering:
- seat: wheel needs a 60 degree cone face
- nut waist must clear the lug hole
- stud must not exceed the 32 mm closed depth
- compare size with an original nut first
- stock alloy wheels: use these only if your original nuts are already cone seat
\'s compatibility list matches by vehicle only. The wheel-side facts above — seat geometry, hole clearance, installed depth and usable thread engagement — still need your own check. Message us through before ordering if anything is unclear.
Why ESPLUS Clarity before checkout.
Wheel hardware is fit-critical. Our listing structure keeps the evidence a buyer needs in the order it should be checked.
Specification First
Thread, seat, dimensions, finish and quantity are organized for direct comparison.
Fitment in Two Layers
Vehicle compatibility and wheel-specific hardware checks are presented separately.
Component-Level Detail
Combination listings keep each component\'s quantity, gallery and technical data distinct.
Pre-Purchase Support
Message us through with your year, model, wheel and current hardware details.
Questions, answered Check the details that decide fit. Will this wheel hardware fit my exact vehicle?Start with the vehicle compatibility section, then read every fitment note. Compatibility data does not replace wheel-side checks such as seat type, hardware dimensions, hole clearance and usable thread engagement. How do I confirm thread pitch and seat type?Compare one piece of your existing hardware with the technical data and the Check Before You Order images. Match the thread on the vehicle side and the seat geometry required by the wheel. What should I verify on aftermarket wheels?Confirm the wheel\'s seat profile, fastener-hole diameter, tool clearance, installed depth and required engagement. These wheel-specific facts are not established by year, make and model alone. What torque specification should I use?Use the vehicle or wheel manufacturer\'s applicable specification and installation procedure. If the two sources differ or the application is modified, consult a qualified installer before installation. Where can I find current shipping and return terms?Use the Shipping, delivery and Returns sections of this listing as the current order-level terms. Those listing controls take priority over general informational text. Shipping · Returns · Fitment Order terms, kept current.
The controls attached to this listing are the source of truth for the transaction.
Shipping
Review the handling time, delivery estimate and available services shown on this listing. Tracking is provided through the order when available.
Returns
The return window, eligibility and conditions shown in this listing govern the order. Start any return request from the purchase record.
Fitment Responsibility
Confirm the listed thread, seat, dimensions, clearance and quantity before installation. When uncertain, message us through before ordering.
About ESPLUS Precision wheel hardware.
Clarity built into every listing.
ESPLUS focuses on wheel fastening hardware and fitment-critical accessories. We organize product specifications, vehicle application data, wheel-side checks and installation guidance so buyers can compare the right facts before ordering.
Visit Our store Store Home response About Us Contact via Follow Store Copyright 2026 Eaglestart Supply Inc. · ESPLUS
![[16] Chrome M12x1.5 Acorn Lug Nuts for 82-88 Chrysler LeBaron](parts-image-large/g/misAAeSwzVlqmWoc/s-l1600/-16-Chrome-M12x1-5-Acorn-Lug-Nuts-for-82-88-Chrysl.jpg "[16] Chrome M12x1.5 Acorn Lug Nuts for 82-88 Chrysler LeBaron")
