[20] Chrome M12x1.25 Acorn Lug Nuts for Nissan Altima Sentra Pathfinder Murano For Sale - New and Used

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

[20] Chrome M12x1.25 Acorn Lug Nuts for Nissan Altima Sentra Pathfinder Murano:
$20.99

Tech Data: Thread Pitch: M12x1.25 · Lug Nut Height: 36 mm · Lug Nut Depth: 32 mm · Lug Nut Flange: 23 mm(0.9Inch) ? full specs belowFitment:Nissan:

Kicks Play 25-Now
Z 23-Now
Kicks 20-Now
Pathfinder 12-Now
LEAF 11-Now
Rogue 08-Now
Sentra 07-Now
Murano 03-Now
Altima 02-Now
ARIYA 23-25
Kicks e-Power 23-25
GT-R 09-24
Qashqai 17-23
Maxima 88-23
Rogue Sport 17-22
NV200 13-21

+8 more vehicles ? see full fitment belowIMPORTANT FITMENT NOTICE: Important: ? Match the 60-degree cone seat contact face ? Check nut waist/body diameter clears the lug hole ? Stud length must not exceed the 32mm closed-nut depth ? Compare size with original nuts b? \'s chart confirms thread pitch only ? unsure? Message us and we\'ll verify fitment before you buy. ESPLUS Company Logo ESPLUS precision wheel hardware ESPLUS
Precision wheel hardware Store Home Hot Products response Exact specificationsThread, seat, size and quantity Fitment before claimsVehicle and wheel checks separated Listing-level termsShipping and returns stay current message supportApplication context stays together Lug Nuts Mag Seat OEM Lug Nuts Duplex Conical OEM Lug Nuts Regular Acorn Lug Nuts Long Acorn Lug Nuts Open End Lug Nuts Spline Lug Nuts Lug Bolts Ball Seat Lug Bolts Cone Seat Lug Bolts Wheel Locks Locker Lug Nuts Locker Lug Bolts Wheel Spacers Hubcentric Spacer with Ball Seat Bolts Hubcentric Spacer with Cone Seat Bolts Wheel Adapters 5 Lug Adapter 6 Lug Adapter 8 Lug Adapter 5 Lug Hubcentric Adapter 6 Lug Hubcentric Adapter Precision wheel hardware · Fitment-first specification Bulge Acorn Cone Seat Lug Nuts 36mm Overall Height 3/4 in hex drive; 23mm flange

[20] Chrome M12x1.25 Acorn Lug Nuts for Nissan Altima Sentra Pathfinder Murano

Direct-fit upgrade for Nissan owners ? confirm your exact year and model in the compatibility chart below before ordering.Closed-End Wheel FastenersFor Aftermarket WheelsFor Steel WheelsDirect Swap With Matching Fit Fitment-first engineering 01 · Order scopeConfirm the exact quantity.Use the listing title and the technical data as the order reference, not the vehicle photograph. 02 · Vehicle sideConfirm thread and application.Read the compatibility section and every fitment note before ordering. 03 · Wheel sideConfirm the actual wheel hardware.Match seat geometry, diameter, clearance, depth and usable thread engagement. Technical Data Numbers, not adjectives.

Every dimension your wheel cares about ? measured, verified, documented.

A M12x1.25 Acorn Lug Nut Type · Acorn 60 Degree Conical Lug Nut ×20 PCS/Set Thread PitchM12x1.25Lug Nut Height36 mmLug Nut Depth32 mmLug Nut Flange23 mm(0.9Inch)Lug Nut Seat60 Degree ConicalColor and FinishChromeDrive3/4\"Tool Requirement3/4\" Hex SocketMaterial MadeSCM Carbon SteelQuantity Per Order20 PcsCalifornia Prop 65 WarningWARNING: This product can expose you to chemicals including Nickel and Lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov. Vehicle Compatibility Fits your car.
Verified, not guessed.

Bulge acorn cone seat lug nuts for aftermarket and steel wheels. Match the 60-degree cone seat, body clearance and closed-nut depth to the wheel and studs.

1Brands 24Vehicles 3Regions AS Japan 1 Featured Nissan Japan · 24 models Stock Alloy Wheel Stock Steel Wheel Aftermarket Wheel Wheel with Cap ModelRegionYear Range 240SX 1995-1998 300ZX CA 1984-1996 350Z US/CA 2003-2009 370Z US/CA/MX 2009-2021 ARIYA US/CA 2023-2025 Altima CA/US/MX 2002-Current GT-R US/CA/MX 2009-2024 Juke US/MX 2011-2017 Kicks MX/US/CA 2020-Current Kicks Play CA/MX/US 2025-Current Kicks e-Power MX 2023-2025 LEAF US/MX/CA 2011-Current Maxima MX/US/CA 1988-2023 Murano US/MX/CA 2003-Current NV200 US 2013-2021 Pathfinder MX/US/CA 2012-Current Qashqai CA 2017-2023 Quest MX/US 1993-2017 Rogue US/MX/CA 2008-Current Rogue Select US 2014-2015 Rogue Sport US 2017-2022 Sentra MX/US/CA 2007-Current X-Trail MX/CA 2002-2020 Z US/MX 2023-Current

Not sure? Message us ? we verify your exact year & model before you buy.

Product Display A closer look at the product.

Finish, geometry, and packaging — from every angle. Tap a thumbnail to view.

Check Before You Order Some fitment details only your vehicle can tell you.

The vehicle list above confirms your year, make and model. The points below are not part of that list — they depend on the wheels and hardware currently on your vehicle. Please verify them before ordering.

Why It\'s Built Different Performance you can torque down. Conical Load Contact

The 60-degree cone seat carries clamping load against a matching wheel seat, with a field-backed 23mm flange.

Covered Stud Ends

The closed end covers the stud tip while the cone seat clamps the wheel; proper fit keeps the stud within the nut cavity.

Familiar Socket Access

The hex drive accepts a 3/4 in socket, allowing installation and removal with matching hand tools.

Defined Outside Profile

The 36mm overall height gives the nut a defined outside profile for comparison with the original nut and available wheel space.

How to Install 3 steps to torque.

Follow the sequence below ? fitment is everything, so read Step 1 carefully.

01 Verify Wheel And Nut Fit

Compare the original nut with this listing. Match the seat, thread and body clearance, then clean the wheel seat and hub mounting face.

An incorrect seat or obstructed lug hole prevents proper clamping. 02 Hand-Start The Nuts

Place the wheel flat against the hub and hand-start the lug nuts. Confirm free threading and full seat contact.

Stop if a nut binds or bottoms out before reaching the wheel seat. 03 Tighten In A Star Pattern

Use the correct socket and a torque wrench. Tighten evenly in a star pattern to the vehicle specification.

Follow the vehicle service guidance for torque and subsequent checks. 01 / 4 4 photos in this guide — tap the arrows or dots to see every step Important Fitment Notice Important:

Match the 60-degree cone seat contact face
Check nut waist/body diameter clears the lug hole
Stud length must not exceed the 32mm closed-nut depth
Compare size with original nuts before ordering
Stock alloy wheels require matching OEM cone seats

\'s compatibility list matches by vehicle only. The wheel-side facts above — seat geometry, hole clearance, installed depth and usable thread engagement — still need your own check. Message us through before ordering if anything is unclear.

Why ESPLUS Clarity before checkout.

Wheel hardware is fit-critical. Our listing structure keeps the evidence a buyer needs in the order it should be checked.

Specification First

Thread, seat, dimensions, finish and quantity are organized for direct comparison.

Fitment in Two Layers

Vehicle compatibility and wheel-specific hardware checks are presented separately.

Component-Level Detail

Combination listings keep each component\'s quantity, gallery and technical data distinct.

Pre-Purchase Support

Message us through with your year, model, wheel and current hardware details.

Questions, answered Check the details that decide fit. Will this wheel hardware fit my exact vehicle?Start with the vehicle compatibility section, then read every fitment note. Compatibility data does not replace wheel-side checks such as seat type, hardware dimensions, hole clearance and usable thread engagement. How do I confirm thread pitch and seat type?Compare one piece of your existing hardware with the technical data and the Check Before You Order images. Match the thread on the vehicle side and the seat geometry required by the wheel. What should I verify on aftermarket wheels?Confirm the wheel\'s seat profile, fastener-hole diameter, tool clearance, installed depth and required engagement. These wheel-specific facts are not established by year, make and model alone. What torque specification should I use?Use the vehicle or wheel manufacturer\'s applicable specification and installation procedure. If the two sources differ or the application is modified, consult a qualified installer before installation. Where can I find current shipping and return terms?Use the Shipping, delivery and Returns sections of this listing as the current order-level terms. Those listing controls take priority over general informational text. Shipping · Returns · Fitment Order terms, kept current.

The controls attached to this listing are the source of truth for the transaction.

Shipping

Review the handling time, delivery estimate and available services shown on this listing. Tracking is provided through the order when available.

Returns

The return window, eligibility and conditions shown in this listing govern the order. Start any return request from the purchase record.

Fitment Responsibility

Confirm the listed thread, seat, dimensions, clearance and quantity before installation. When uncertain, message us through before ordering.

About ESPLUS Precision wheel hardware.
Clarity built into every listing.

ESPLUS focuses on wheel fastening hardware and fitment-critical accessories. We organize product specifications, vehicle application data, wheel-side checks and installation guidance so buyers can compare the right facts before ordering.