Tech Data: Thread Pitch: M14x1.25 · Lug Bolts Shank Length: 55 mm · Lug Bolts Flange: 23 mm · Lug Bolt Seat: 60 Degree Conical ? full specs belowThis wholesale case ships as 10 sealed boxes of 10 pieces, 100 lug bolts in total.IMPORTANT FITMENT NOTICE: Before Installing: ? measure the original bolt\'s shank length first ? extended shank = OEM shank + spacer thickness, within 3mm ? bolts only, no spacers included in this listing ? verify cone seat an? \'s chart confirms thread pitch only ? unsure? Message us and we\'ll verify fitment before you buy. ESPLUS Company Logo ESPLUS precision wheel hardware ESPLUS
Precision wheel hardware Store Home Hot Products response Exact specificationsThread, seat, size and quantity Fitment before claimsVehicle and wheel checks separated Listing-level termsShipping and returns stay current message supportApplication context stays together Lug Nuts Mag Seat OEM Lug Nuts Duplex Conical OEM Lug Nuts Regular Acorn Lug Nuts Long Acorn Lug Nuts Open End Lug Nuts Spline Lug Nuts Lug Bolts Ball Seat Lug Bolts Cone Seat Lug Bolts Wheel Locks Locker Lug Nuts Locker Lug Bolts Wheel Spacers Hubcentric Spacer with Ball Seat Bolts Hubcentric Spacer with Cone Seat Bolts Wheel Adapters 5 Lug Adapter 6 Lug Adapter 8 Lug Adapter 5 Lug Hubcentric Adapter 6 Lug Hubcentric Adapter Precision wheel hardware · Fitment-first specification Cone Seat Extended Lug Bolts 17mm DriveSCM Carbon SteelFor Spacer SetupsCone-OEM CarsStock Alloy/Steel & Aftermarket Wheels BOLTS ONLY - NO SPACERS INCLUDED
100 Pcs Black M14x1.25 17mm Hex Cone Seat Lug Bolts Bulk 10 Boxes x 10
For Tire Shops, Fleets & ResaleCone Seat Bolts, Spacer-ReadyFor Cone-OEM CarsFor Spacer Setups - Bolts OnlyFull Thread Depth With SpacersFits Alloy And Steel Wheels Fitment-first engineering 01 · Order scopeConfirm the exact quantity.Use the listing title and the technical data as the order reference, not the vehicle photograph. 02 · Vehicle sideConfirm thread and application.Read the compatibility section and every fitment note before ordering. 03 · Wheel sideConfirm the actual wheel hardware.Match seat geometry, diameter, clearance, depth and usable thread engagement. Product
Cone seat extended lug bolts, 17mm drive, for cone-OEM cars using wheel spacers. Sold wholesale by the case.
This wholesale case ships as 10 sealed boxes of 10 pieces, 100 lug bolts in total.
Technical Data Numbers, not adjectives.
Every dimension your wheel cares about ? measured, verified, documented.
A Extended Lug Bolts Type · Cone Seat Extended Lug Bolt ×100 PCS/Set Thread PitchM14x1.25Lug Bolts Shank Length55 mmLug Bolts Flange23 mmLug Bolt Seat60 Degree ConicalColor and FinishBlackDrive17 mmTool Requirement17 mm SocketMaterial MadeSCM Carbon SteelQuantity Per Order100 PcsCalifornia Prop 65 WarningWARNING: This product can expose you to chemicals including Nickel and Lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov. Product Display A closer look at the product.
Finish, geometry, and packaging — from every angle. Tap a thumbnail to view.
Check Before You Order Some fitment details only your vehicle can tell you.
The vehicle list above confirms your year, make and model. The points below are not part of that list — they depend on the wheels and hardware currently on your vehicle. Please verify them before ordering.
Why It\'s Built Different Performance you can torque down. SCM Carbon Steel Build
Each bolt is machined from SCM carbon steel, matching factory-grade material across the full 8-pack or 16-pack set.
True Cone Seat Centering
The conical seat matches factory cone-seat hubs, centering the wheel the same way the original bolts do.
17mm Drive Matches Factory Socket
A 17mm hex drive works with the same 17mm socket used on the factory bolts, so no specialty tool is needed.
Extended Shank Clears Spacer Thickness
The longer shank carries full thread engagement through a wheel spacer, holding the same seated depth as stock.
Fits Alloy, Steel, And Aftermarket Wheels
Compatible with stock alloy, stock steel, and aftermarket wheels built on a cone seat pattern, covering OEM and replacement setups.
One Part Number Per Bulk Case
Every sealed box in the case holds the same lug bolt as the retail sets, so shop and fleet stock stays one part number across boxes.
How to Install 3 steps to torque.
Follow the sequence below ? fitment is everything, so read Step 1 carefully.
01 Measure Original Bolt
Measure the shank length and seat angle of the factory bolt being replaced before installing spacers.
Extended shank must equal OEM shank plus spacer thickness within 3mm. 02 Install Spacer And Bolt
Seat the wheel spacer against the hub, then thread the extended bolt through spacer and wheel into the hub.
Torque to the vehicle manufacturer spec; never use an impact gun to seat the cone. 03 Torque In A Star Pattern
Tighten all bolts in a crossing star pattern to the specified torque value in two passes.
Re-check torque after the first 50 miles of driving. 01 / 4 4 photos in this guide — tap the arrows or dots to see every step Important Fitment Notice Before Installing:
- measure the original bolt\'s shank length first
- extended shank = OEM shank + spacer thickness, within 3mm
- bolts only, no spacers included in this listing
- verify cone seat angle matches your factory bolts
\'s compatibility list matches by vehicle only. The wheel-side facts above — seat geometry, hole clearance, installed depth and usable thread engagement — still need your own check. Message us through before ordering if anything is unclear.
Why ESPLUS Clarity before checkout.
Wheel hardware is fit-critical. Our listing structure keeps the evidence a buyer needs in the order it should be checked.
Specification First
Thread, seat, dimensions, finish and quantity are organized for direct comparison.
Fitment in Two Layers
Vehicle compatibility and wheel-specific hardware checks are presented separately.
Component-Level Detail
Combination listings keep each component\'s quantity, gallery and technical data distinct.
Pre-Purchase Support
Message us through with your year, model, wheel and current hardware details.
Questions, answered Check the details that decide fit. Will this wheel hardware fit my exact vehicle?Start with the vehicle compatibility section, then read every fitment note. Compatibility data does not replace wheel-side checks such as seat type, hardware dimensions, hole clearance and usable thread engagement. How do I confirm thread pitch and seat type?Compare one piece of your existing hardware with the technical data and the Check Before You Order images. Match the thread on the vehicle side and the seat geometry required by the wheel. What should I verify on aftermarket wheels?Confirm the wheel\'s seat profile, fastener-hole diameter, tool clearance, installed depth and required engagement. These wheel-specific facts are not established by year, make and model alone. What torque specification should I use?Use the vehicle or wheel manufacturer\'s applicable specification and installation procedure. If the two sources differ or the application is modified, consult a qualified installer before installation. Where can I find current shipping and return terms?Use the Shipping, delivery and Returns sections of this listing as the current order-level terms. Those listing controls take priority over general informational text. Shipping · Returns · Fitment Order terms, kept current.
The controls attached to this listing are the source of truth for the transaction.
Shipping
Review the handling time, delivery estimate and available services shown on this listing. Tracking is provided through the order when available.
Returns
The return window, eligibility and conditions shown in this listing govern the order. Start any return request from the purchase record.
Fitment Responsibility
Confirm the listed thread, seat, dimensions, clearance and quantity before installation. When uncertain, message us through before ordering.
About ESPLUS Precision wheel hardware.
Clarity built into every listing.
ESPLUS focuses on wheel fastening hardware and fitment-critical accessories. We organize product specifications, vehicle application data, wheel-side checks and installation guidance so buyers can compare the right facts before ordering.
Visit Our store Store Home response About Us Contact via Follow Store Copyright 2026 Eaglestart Supply Inc. · ESPLUS
