1Pc Wheel Hub Bearing Front RWD 6 Lug For Cadillac STS SRX CTS-V 2005 2006 2007 For Sale - New and Used

Product Features:

• Fits either LH (Driver Side) or RH (Passenger Side)Front or Rear
• Fits 6 LugsWheels
• Wheel studs already installed
• Includes ABS with tegral Sensor

Item Description:

• Brand New Wheel Hub Assembly
• Direct replacement
• Built to strict quality control standards
• Replaces dealer part numbers:512308, 513197, HA590077, HA590116, BR930313, 10368309, 12413103, 12413104, 12413198, 12413262, 7467455, 7467709

Vehicle Fitment:

• Note: Fits 3 Hole Triangular Flange Only!!! NOT for4 Hole Rectangular Flange!!!

1Pc Wheel Hub Bearing Front RWD 6 Lug For Cadillac STS SRX CTS-V 2005 2006 2007

Product Features:

• Fits either LH (Driver Side) or RH (Passenger Side)Front or Rear
• Fits 6 LugsWheels
• Wheel studs already installed
• Includes ABS with tegral Sensor

Item Description:

• Brand New Wheel Hub Assembly
• Direct replacement
• Built to strict quality control standards
• Replaces dealer part numbers:512308, 513197, HA590077, HA590116, BR930313, 10368309, 12413103, 12413104, 12413198, 12413262, 7467455, 7467709

Vehicle Fitment:

• Note: Fits 3 Hole Triangular Flange Only!!! NOT for4 Hole Rectangular Flange!!!

• Front Models
• Fits Cadillac STS 2005-2011 6-Lug RWD Models Only | Front Only
• Fits Cadillac SRX 2004-2009 6-Lug RWD Models Only | Front Only
• Fits Cadillac CTS-V 2004-2007 6-Lug RWD Models Only | Front Only

• Rear Models
• Fits Buick Terraza 2006-2007 FWD Models Only; 3 Hole Triangular Flange | Rear Only
• Fits Chevrolet Uplander 2006-2009 FWD Models Only; 3 Hole Triangular Flange | Rear Only
• Fits Pontiac Montana 2007-2009 3 Hole Triangular Flange | Rear Only
• Fits Saturn Relay-1 2007 Rear Only
• Fits Saturn Relay-2 2006-2007 Rear Only
• Fits Saturn Relay-3 2006-2007 Rear Only

Package Include:

• (1) Wheel Hub Bearing

Exploded View:

1. Wheel hub and bearing
2. Cotter pin
3. Nut retainer
4. Wheel hub lock nut
5. Hub bolt
6. Splash guard
7. Steering
8. Remove the bolt (1) and separate the front wheel sensor from the steering knuckle.?
9. Remove brake caliper torque member bolts, leaving brake hose attached, reposition the caliper aside with wire.
10. Put alignment marks (A) on disc brake rotor and wheel hub and bearing. Remove disc brake rotor.
11. Remove cotter pin and the nut retainer,Loosen the wheel hub lock nut from the drive shaft using power tool.
12. Using a piece of wood and a suitable tool, tap on the lock nut to disengage the drive shaft from the wheel hub and bearing.
13. Remove the engine side cover.
14. Remove the lower nut and bolt from the steering knuckle,Separate transverse link from steering knuckle.
15. Separate drive shaft from wheel hub and bearing, Reposition the drive shaft aside with wire.
16. Remove the wheel hub and bearing bolts using power tool.
17. Remove the splash guard and the wheel hub and bearing from the steering
18. Failure to separate the front wheel sensor from the steering knuckle may result in damage to the front wheel sensor;
19. Pull out the front wheel sensor, being careful to turn it as little as possible.
20. Do not pull on wheel after removel : Check components for deformationy,cracksy,and other damagey,and boots of transverse link ball joint for cracksy,axial end play,and swing is in the reverse order of the
21. Do not reuse the wheel stud.
22. Do not reuse the cotter pin.
23. Place a washer (A) as shown to install the wheel studs (1) by using the tightening force of the nut (B).
24. Clean the mating surfaces of the joint sub-assembly and the wheel hub and bearing. Apply lubricant to the surface (A) of the joint sub-assembly.
25. Hold the wheel hub and bearing using a suitable tool. Tighten the wheel hub lock nut

6. Since the drive shaft is assembled by press-fitting, use a torque wrench to tighten the wheel hub lock nut. Do not use a power tool.

7. Too much torque causes axle noise. Too little torque causes wheel bearing looseness. Tighten the wheel hub lock nut to the specification.

8. When installing a the cotter pin (1) and the nut retainer (2), securely bend the cotter pin to prevent rattles.

9. Align the matching marks (A) on the disc brake rotor and on the wheel hub and bearing.

Item SpecificsBrand ECCPPManufacturer Part Number ECP065992HKABS Sensor Has ABS with tegral SensorPlacement on Vehicle FrontMaterial SteelSurface Finish Polished, Rust ProtectedType Wheel Hub & Bearing AssemblyOE/OEM Part Number 513197Quantity 1Fitment 1 2005 2006 2007 2008 2009 2010 2011 Cadillac STSFitment 2 2004 2005 2006 2007 2008 2009 Cadillac SRXFitment 3 2004 2005 2006 2007 Cadillac CTS-VDrive Type RWDInterchange Part Number 512308 HA590077 HA590116 BR930313Bolt Pattern 6 x 115 mmAnti-lock Braking System YesBolt Circle Diameter 4.53 in. / 115 mmBrake Pilot Diameter 2.78 in. / 70.6 mmFlange Bolt Hole Quantity 3Knuckle Bolt Circle Diameter 4.57 in. / 116 mmKnuckle Bolt Hole Size M12x1.75Flange Bolts Included NoFlange Diameter 5.73 in. / 145.6 mmFlange Offset 1.65 in. / 42 mmFlange Shape TriangleHub Pilot Diameter 3.59 in. / 91.2 mmWheel Pilot Diameter 2.76 in. / 70.1 mmWheel Stud Quantity 6Wheel Stud Size M12x1.5Wheel Studs Included YesBearing Type Ball BearingBearing Generation G3 Item SpecificsBrand ECCPPManufacturer Part Number ECP065992HKABS Sensor Has ABS with tegral SensorPlacement on Vehicle FrontMaterial SteelSurface Finish Polished, Rust ProtectedType Wheel Hub & Bearing AssemblyOE/OEM Part Number 513197Quantity 1Fitment 1 2005 2006 2007 2008 2009 2010 2011 Cadillac STSFitment 2 2004 2005 2006 2007 2008 2009 Cadillac SRXFitment 3 2004 2005 2006 2007 Cadillac CTS-VDrive Type RWDInterchange Part Number 512308 HA590077 HA590116 BR930313Bolt Pattern 6 x 115 mmAnti-lock Braking System YesBolt Circle Diameter 4.53 in. / 115 mmBrake Pilot Diameter 2.78 in. / 70.6 mmFlange Bolt Hole Quantity 3Knuckle Bolt Circle Diameter 4.57 in. / 116 mmKnuckle Bolt Hole Size M12x1.75Flange Bolts Included NoFlange Diameter 5.73 in. / 145.6 mmFlange Offset 1.65 in. / 42 mmFlange Shape TriangleHub Pilot Diameter 3.59 in. / 91.2 mmWheel Pilot Diameter 2.76 in. / 70.1 mmWheel Stud Quantity 6Wheel Stud Size M12x1.5Wheel Studs Included YesBearing Type Ball BearingBearing Generation G3
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

• PayPalpreferred.
Picture
Hot Item Universal 12V Low Pressure 5-9 PSI Electric Fuel Pump Installation Kit E8012S USD 14.15 Pair For 2007-2014 Chevy Silverado Sierra Towing Power Heated LED Signal Mirrors USD 124.69 Pair Manual Adjust Tow Mirrors For 1988-1998 Chevy GMC C K 1500/2500/3500 USD 62.99 ECCPP 2 Pcs Wheel Hub Bearing Front For Buick LaCrosse Century Regal Lesabre FWD USD 60.95 Front Wheel Hub Bearing For Chevy Monte Carlo Impala Cadillac Eldorado DTS FWD USD 40.38 Shop CategoryStore Home Air Dryer Car Tools◈Car Tools◈Electric Winch Tow◈Jack Stand◈Jumper Cable◈Removal Tool◈Tire Pressure Gauge Clutch System◈Clutch Slave Cylinder Cooling System◈AC Compressor◈Air Blend Door Actuator◈Blower Motor Resistor◈Condenser◈Coolant Tank◈Cooling Fan◈Evaporator◈Heater Control Valve◈Heater Hose◈Radiator Support◈Thermostat Housing◈Water Pump◈Water Pump Impeller Copper Tube◈ATV Brake Caliper◈ATV Brake Master Cylinder◈Brake caliper◈Brake drum shoe◈Brake lines kit◈Brake rotor pad◈Brake Shoe◈Clutch Lever◈Power Brake Booster Crankshaft And Camshaft◈Camshaft & Crankshaft◈Harmonic Banlancer◈Timing Chain Kit Drive Belt And Device◈Primary Drive Clutch◈Serpentine Belt Tensioner◈Wear Ring Drive Shaft And Half Shaft◈4 Pcs Wheel Hub Bearing◈C Notch & Flip Kit◈CV Axle◈CV Axle Boot◈Driveshaft◈Rear Wheel Axle◈Wheel Hub Bearing◈Wheel Hub Bearing Knuckle◈Wheel Hub Centric Rings◈Wheel Spacers Engine Bracket Glue◈Engine Mount Engine Gasket & Cylinder Head◈Carbon Seal◈Cylinder Head◈Cylinder Piston Gasket Kit◈Head Gasket Set Fuel System◈Car Carburetor◈Fuel Cell Gas Tank◈Fuel Injectors◈Fuel Pump Assembly◈Fuel Tank Pipe & Cap◈Fuel Tank Valve & Regulator◈Mass Air Flow Sensor◈Motorcycle Carburetor & Parts◈Oil Fuel Hose◈Purge Valve◈Vacuum Pump Gas Distribution System◈Diesel Emissions Fluid Pump◈Hydraulic Lifter & Rocker Arms◈Idle Air Control Valve◈Intake Carburetor Boot◈Secondary Air Pump◈Throttle Body◈Turbocharger◈Valve Cover Golf Series Home gardening◈Courtyard And Outdoor Supplies Ignition System◈ATV Ignition Coil◈Fuse Box◈Glow Plugs◈Ignition Coil & Spark Plug◈Ignition Coils◈Ignition Distributor◈Spark Plug Wire Set◈Wiring Harness Inner Parts◈Air Cleaner Box Assembly◈Car Floor Mats◈Car Seat Cover◈Cargo Cover◈Center Console◈Dash Cover & Cushion◈Fastener◈Remote Key◈Shift Knob Lever Head◈Steering Wheel & Adapter◈Sun Visor Lawn Mower Parts Light products◈Exterior Lights◈Fog Light◈Headlight Assembly◈Instrument Panel Lights◈Interior Lights◈Led Headlights◈Motorcycle Light◈Side/Cab Marker Lights◈Special Model Lights◈Third Brake Lights Lubrication System◈Dipstick◈Engine Oil Cooler◈Oil Pan◈Oil Pump Other Parts◈Shackle Kit◈Wheel Lug NutsNew List Item ECCPP 12594942 Manifold Pressure Sensor MAP For 2009-2013 GMC Yukon XL 1500 2500 USD 13.97 ECCPP Transmission Fluid Change Filter Service Gasket For 4Wd 45RFE 545RFE 68RFE USD 35.52 ECCPP Engine Oil Pressure Switch Sender Sensor For Jeep Chrysler 56028807AA USD 19.15 ECCPP PDC Parking Assist Sensor for 2016-2021 Tesla Referral Model S X 2017-2021 Model 3 USD 18.88 ECCPP Air Intake Temperature Sensor 37880-PLC-004 For Accord Civic CR-V S2000 USD 10.69 1Pc Wheel Hub Bearing Front RWD 6 Lug For Cadillac STS SRX CTS-V 2005 2006 2007

Product Features:

• Fits either LH (Driver Side) or RH (Passenger Side)Front or Rear
• Fits 6 LugsWheels
• Wheel studs already installed
• Includes ABS with tegral Sensor

Item Description:

• Brand New Wheel Hub Assembly
• Direct replacement
• Built to strict quality control standards
• Replaces dealer part numbers:512308, 513197, HA590077, HA590116, BR930313, 10368309, 12413103, 12413104, 12413198, 12413262, 7467455, 7467709

Vehicle Fitment:

• Note: Fits 3 Hole Triangular Flange Only!!! NOT for4 Hole Rectangular Flange!!!
• Front Models
• Fits Cadillac STS 2005-2011 6-Lug RWD Models Only | Front Only
• Fits Cadillac SRX 2004-2009 6-Lug RWD Models Only | Front Only
• Fits Cadillac CTS-V 2004-2007 6-Lug RWD Models Only | Front Only
• Rear Models
• Fits Buick Terraza 2006-2007 FWD Models Only; 3 Hole Triangular Flange | Rear Only
• Fits Chevrolet Uplander 2006-2009 FWD Models Only; 3 Hole Triangular Flange | Rear Only
• Fits Pontiac Montana 2007-2009 3 Hole Triangular Flange | Rear Only
• Fits Saturn Relay-1 2007 Rear Only
• Fits Saturn Relay-2 2006-2007 Rear Only
• Fits Saturn Relay-3 2006-2007 Rear Only

Package Include:

• (1) Wheel Hub Bearing

Exploded View:

1. Wheel hub and bearing
2. Cotter pin
3. Nut retainer
4. Wheel hub lock nut
5. Hub bolt
6. Splash guard
7. Steering
8. Remove the bolt (1) and separate the front wheel sensor from the steering knuckle.?
9. Remove brake caliper torque member bolts, leaving brake hose attached, reposition the caliper aside with wire.
10. Put alignment marks (A) on disc brake rotor and wheel hub and bearing. Remove disc brake rotor.
11. Remove cotter pin and the nut retainer,Loosen the wheel hub lock nut from the drive shaft using power tool.
12. Using a piece of wood and a suitable tool, tap on the lock nut to disengage the drive shaft from the wheel hub and bearing.
13. Remove the engine side cover.
14. Remove the lower nut and bolt from the steering knuckle,Separate transverse link from steering knuckle.
15. Separate drive shaft from wheel hub and bearing, Reposition the drive shaft aside with wire.
16. Remove the wheel hub and bearing bolts using power tool.
17. Remove the splash guard and the wheel hub and bearing from the steering
18. Failure to separate the front wheel sensor from the steering knuckle may result in damage to the front wheel sensor;
19. Pull out the front wheel sensor, being careful to turn it as little as possible.
20. Do not pull on wheel after removel : Check components for deformationy,cracksy,and other damagey,and boots of transverse link ball joint for cracksy,axial end play,and swing is in the reverse order of the
21. Do not reuse the wheel stud.
22. Do not reuse the cotter pin.
23. Place a washer (A) as shown to install the wheel studs (1) by using the tightening force of the nut (B).
24. Clean the mating surfaces of the joint sub-assembly and the wheel hub and bearing. Apply lubricant to the surface (A) of the joint sub-assembly.
25. Hold the wheel hub and bearing using a suitable tool. Tighten the wheel hub lock nut

6. Since the drive shaft is assembled by press-fitting, use a torque wrench to tighten the wheel hub lock nut. Do not use a power tool.

7. Too much torque causes axle noise. Too little torque causes wheel bearing looseness. Tighten the wheel hub lock nut to the specification.

8. When installing a the cotter pin (1) and the nut retainer (2), securely bend the cotter pin to prevent rattles.

9. Align the matching marks (A) on the disc brake rotor and on the wheel hub and bearing.

Item SpecificsBrand :ECCPPManufacturer Part Number :ECP065992HKABS Sensor :Has ABS with tegral SensorPlacement on Vehicle :FrontMaterial :SteelSurface Finish :Polished, Rust ProtectedType :Wheel Hub & Bearing AssemblyOE/OEM Part Number :513197Quantity :1Fitment 1 :2005 2006 2007 2008 2009 2010 2011 Cadillac STSFitment 2 :2004 2005 2006 2007 2008 2009 Cadillac SRXFitment 3 :2004 2005 2006 2007 Cadillac CTS-VDrive Type :RWDInterchange Part Number :512308 HA590077 HA590116 BR930313Bolt Pattern :6 x 115 mmAnti-lock Braking System :YesBolt Circle Diameter :4.53 in. / 115 mmBrake Pilot Diameter :2.78 in. / 70.6 mmFlange Bolt Hole Quantity :3Knuckle Bolt Circle Diameter :4.57 in. / 116 mmKnuckle Bolt Hole Size :M12x1.75Flange Bolts Included :NoFlange Diameter :5.73 in. / 145.6 mmFlange Offset :1.65 in. / 42 mmFlange Shape :TriangleHub Pilot Diameter :3.59 in. / 91.2 mmWheel Pilot Diameter :2.76 in. / 70.1 mmWheel Stud Quantity :6Wheel Stud Size :M12x1.5Wheel Studs Included :YesBearing Type :Ball BearingBearing Generation :G3 Item SpecificsBrand ECCPPManufacturer Part Number ECP065992HKABS Sensor Has ABS with tegral SensorPlacement on Vehicle FrontMaterial SteelSurface Finish Polished, Rust ProtectedType Wheel Hub & Bearing AssemblyOE/OEM Part Number 513197Quantity 1Fitment 1 2005 2006 2007 2008 2009 2010 2011 Cadillac STSFitment 2 2004 2005 2006 2007 2008 2009 Cadillac SRXFitment 3 2004 2005 2006 2007 Cadillac CTS-VDrive Type RWDInterchange Part Number 512308 HA590077 HA590116 BR930313Bolt Pattern 6 x 115 mmAnti-lock Braking System YesBolt Circle Diameter 4.53 in. / 115 mmBrake Pilot Diameter 2.78 in. / 70.6 mmFlange Bolt Hole Quantity 3Knuckle Bolt Circle Diameter 4.57 in. / 116 mmKnuckle Bolt Hole Size M12x1.75Flange Bolts Included NoFlange Diameter 5.73 in. / 145.6 mmFlange Offset 1.65 in. / 42 mmFlange Shape TriangleHub Pilot Diameter 3.59 in. / 91.2 mmWheel Pilot Diameter 2.76 in. / 70.1 mmWheel Stud Quantity 6Wheel Stud Size M12x1.5Wheel Studs Included YesBearing Type Ball BearingBearing Generation G3
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
• PayPalpreferred.

​

​




Copyright of eccppautoparts. All rights reserved.






---