Product Description
- Fitment for:
- Denso Isuzu Holden 3.0L 4JJ1
- Package Includeds:1PCSFuel Injectors
- Product Features:
- 1.Precise control:Thereby improving the combustion efficiency and power performance of the engine.
- 2.Good atomization effect:Itallows the fuel to be fully burned and reduces emission pollution.The engine runs more stably, with less vibration and less engine injectors can also be adaptively adjusted according to the working state of the engine to ensure the normal operation of the engine under different working conditions.
Diesel Fuel Injector Fit For Isuzu Holden 3.0L 4JJ1 8980116040 095000-6980
Fitment for:
Denso Isuzu Holden 3.0L 4JJ1
Package Includeds:1PCSFuel Injectors
Product Features:
1.Precise control:Thereby improving the combustion efficiency and power performance of the engine.
2.Good atomization effect:Itallows the fuel to be fully burned and reduces emission pollution.The engine runs more stably, with less vibration and less engine noise.
3.Adaptiveregulation:Fuel injectors can also be adaptively adjusted according to the working state of the engine to ensure the normal operation of the engine under different working conditions.
4.compact structure:It is easy to maintain and replace, and reduces maintenance costs.
Product structure diagram:
Product installation procedure:
Step 1:Insert the injector into the mounting hole.
Step 2:Use a wrench to pre-tighten the bolts that secure the injector and compress the injector.
Step 3:Completely loosen the bolts that secure the injector.
Step 4:Install the jumper tube.
Step 5:Pre-tighten the jumper pipe.
Step 6:Tighten the injector fixing bolts according to the specified torque and tighten the injector again.
Step 7:Tighten the jumper tube according to the specified torque.
Note:The sampler with jumper tube must be installed according to the above process in order to avoid damage to jumper tube and more serious engine failure.
Precautions when using the injector:
1. Before using the vehicle, manually pump oil into the injectors of each cylinder to prevent dry grinding due to lack of fuel lubrication.
2. After long-term shutdown or maintenance, bleed the fuel injection equipment, including the injector, to prevent air from entering and causing unbalanced loads on each cylinder.
3. The equipment engineer must know how to correctly disassemble and assemble the fuel injector and adjust injection pressure according to manufacturer instructions.
4. Pay attention to the quality of fuel as it affects the service life and stability of the injector.
5. Monitor each cylinder parameter closely for signs of malfunction such as increased fuel consumption, excessive emissions, difficulty starting, unstable idling, weak acceleration, or easy stalling.
Working principle of the fuel injector:
When the electromagnetic coil is energized, it creates suction to lift the needle valve and open the spray hole, allowing fuel to be sprayed out at high speed for complete combustion.
The injector nozzle is normally closed but opens when there is an input control signal. The opening and closing of the valve is controlled by the movement of a valve needle.
When the ECU issues an injection command, its voltage signal causes current to flow through the injector's coil, generating a magnetic field to lift the valve needle and allow fuel to be sprayed out from the injection hole.
Is there a break-in period with my new fuel injectors?
The answer is yes. But, only if you do it right.
If you install a high-flow fuel injector , you risk over-fueling the engine. The result is fouled spark plugs, erratic idle, power surging and even permanent damage to the catalytic converter and your engine.
What will bigger fuel injectors do?
Installing larger fuel injectors on a stock engine is not recommended without making other changes to the fuel system or re-mapping the ECU. Doing so can cause misfires, erratic engine rpm, and reduced fuel economy, potentially leading to engine damage.
If you have a modified engine and want to install higher flow fuel injectors, please contact us assistance in choosing the right upgrade.
Can you upgrade fuel injectors?
Yes, a fuel injector upgrade is a great option to help add miles-per-gallon or restore lost power and torque in older or high-mileage engines.
How do I know if my current injectors are low impedance or high impedance?
By measuring the resistance across the two electrical terminals of the injector with a multimeter, you can determine the impedance. If the resistance is between 1.5 and 4.0 Ohms, you have low impedance injectors (Low Z). If the resistance is between 8 and 16 Ohms, you have high impedance injectors (High Z).
Item Warranty1 YearManufacturer Part NumberLE15296401STypeFuel InjectorVintage Car PartNOConnector ColorAs Shown in the PictureFuel TypeDieselUniversal FitmentYesPackage1pcsInjector DesignMetal & composite plasticBundle ListingNoFitment TypeDirect ReplacementOE/OEM Part Number8980116040, 8980116041, 8980116042, 8980116043, 8980116044Placement on VehicleFrontSuperseded Part Number8980116045, 8980116046, 8980116047, 8980116048, 8980116049Weight2 LBFuel delivery typeFog-type sprayOE Spec or Performance/CustomOE SpecInterchange Part Number095000-6980, 095000-6981, 095000-6982,
Fitment for:
Denso Isuzu Holden 3.0L 4JJ1
Package Includeds:1PCSFuel Injectors
Product Features:
1.Precise control:Thereby improving the combustion efficiency and power performance of the engine.
2.Good atomization effect:Itallows the fuel to be fully burned and reduces emission pollution.The engine runs more stably, with less vibration and less engine noise.
3.Adaptiveregulation:Fuel injectors can also be adaptively adjusted according to the working state of the engine to ensure the normal operation of the engine under different working conditions.
4.compact structure:It is easy to maintain and replace, and reduces maintenance costs.
Product structure diagram:
Product installation procedure:
Step 1:Insert the injector into the mounting hole.
Step 2:Use a wrench to pre-tighten the bolts that secure the injector and compress the injector.
Step 3:Completely loosen the bolts that secure the injector.
Step 4:Install the jumper tube.
Step 5:Pre-tighten the jumper pipe.
Step 6:Tighten the injector fixing bolts according to the specified torque and tighten the injector again.
Step 7:Tighten the jumper tube according to the specified torque.
Note:The sampler with jumper tube must be installed according to the above process in order to avoid damage to jumper tube and more serious engine failure.
Precautions when using the injector:
1. Before using the vehicle, manually pump oil into the injectors of each cylinder to prevent dry grinding due to lack of fuel lubrication.
2. After long-term shutdown or maintenance, bleed the fuel injection equipment, including the injector, to prevent air from entering and causing unbalanced loads on each cylinder.
3. The equipment engineer must know how to correctly disassemble and assemble the fuel injector and adjust injection pressure according to manufacturer instructions.
4. Pay attention to the quality of fuel as it affects the service life and stability of the injector.
5. Monitor each cylinder parameter closely for signs of malfunction such as increased fuel consumption, excessive emissions, difficulty starting, unstable idling, weak acceleration, or easy stalling.
Working principle of the fuel injector:
When the electromagnetic coil is energized, it creates suction to lift the needle valve and open the spray hole, allowing fuel to be sprayed out at high speed for complete combustion.
The injector nozzle is normally closed but opens when there is an input control signal. The opening and closing of the valve is controlled by the movement of a valve needle.
When the ECU issues an injection command, its voltage signal causes current to flow through the injector's coil, generating a magnetic field to lift the valve needle and allow fuel to be sprayed out from the injection hole.
Is there a break-in period with my new fuel injectors?
The answer is yes. But, only if you do it right.
If you install a high-flow fuel injector , you risk over-fueling the engine. The result is fouled spark plugs, erratic idle, power surging and even permanent damage to the catalytic converter and your engine.
What will bigger fuel injectors do?
Installing larger fuel injectors on a stock engine is not recommended without making other changes to the fuel system or re-mapping the ECU. Doing so can cause misfires, erratic engine rpm, and reduced fuel economy, potentially leading to engine damage.
If you have a modified engine and want to install higher flow fuel injectors, please contact us assistance in choosing the right upgrade.
Can you upgrade fuel injectors?
Yes, a fuel injector upgrade is a great option to help add miles-per-gallon or restore lost power and torque in older or high-mileage engines.
How do I know if my current injectors are low impedance or high impedance?
By measuring the resistance across the two electrical terminals of the injector with a multimeter, you can determine the impedance. If the resistance is between 1.5 and 4.0 Ohms, you have low impedance injectors (Low Z). If the resistance is between 8 and 16 Ohms, you have high impedance injectors (High Z).
Item SpecificsBrand :DensoManufacturer Warranty :1 YearManufacturer Part Number :LE15296401SType :Fuel InjectorVintage Car Part :NOConnector Color :As Shown in the PictureFuel Type :DieselUniversal Fitment :YesPackage :1pcsInjector Design :Metal & composite plasticBundle Listing :NoFitment Type :Direct ReplacementOE/OEM Part Number :8980116040, 8980116041, 8980116042, 8980116043, 8980116044Placement on Vehicle :FrontSuperseded Part Number :8980116045, 8980116046, 8980116047, 8980116048, 8980116049Weight :2 LBFuel delivery type :Fog-type sprayOE Spec or Performance/Custom :OE SpecInterchange Part Number :095000-6980, 095000-6981, 095000-6982, 095000-6983
Contact us:
If you have any questions or problems, please feel free to contact us, we believe that sincere communication
is the most effective way to solve problems.
Replacement/Return:
Please contact us before returning or exchanging an item, we will make sure the problem is handled properly
until you are satisfied!
Contact us:
If you have any questions or problems, please feel free to contact us, we believe that sincere communication
is the most effective way to solve problems.
Replacement/Return:
Please contact us before returning or exchanging an item, we will make sure the problem is handled properly
until you are satisfied!
About Us
1.We strive to satisfy every customer.we will do our best to solve your problem.
2.Before leaving us neutral or negative response, please contact us first. We will do everything we can to give you a satisfying solution.
3.Please don't open case via or paypal.
4.Please don't open any return request before contact us.
5.We do our best to resolve any issue. Leaving negative responses and low ratings doesn't get things solved. So please talk with us and we will not let you down.
Payment
We accept PayPal via Secure Check-Out only.
Immediate payment needs to be processed for items with Add to Cart option so that any promotional discounts can be applied to your order immediately.
Shipping
Order handling time: 2-3 business day.
It usually takes 3-7 business days for the delivery.
Your order will be usually shipped out on the same day or the next day when you paid for it.
Please make sure your address on is matched with your shipping address before you pay.
Returns
All returned products must be in their original packaging with all included accessories intact
If you are satisfied with the product you received, please feel free to leave us positive response.
If you are not satisfied, please contact us before leaving any negative response or open any case on , thanks.
NEW 4x Delphi Fuel Injector 7516848 / 28337917 Bobcat 7275454 / D18 D24 US STK
710.0 USD
Free shipping
DENSO Fuel Pump Regulator Filter For 2006-07 Honda CBR 1000 RR 16700-MEL-D21
131.0 USD
Free shipping
6Pcs Denso Fuel Injectors 23250-20010 for 1994-2003 Lexus Toyota 3.0L V6 New
85.0 USD
Free shipping
NEW 6PCS DENSO 673-6300 DG549 Ignition Coils fits Ford F150 3.5L US inventory
125.5 USD
Free shipping
NEW Alternator For Honda Civic 1.8L 2012-2015 A5TJ0191ZC 31100-R1A-A01 11537
223.25 USD
235.0 USD
Free shipping
5%
offDENSO 37980-R40-A01 For Honda Accord CR-V Civic Acura MAF Mass Air Flow Sensor
55.0 USD
Free shipping
powered by
