Brackets have a 3/4” hole for a joint with a 2 5/8” mounting width with the Joint Shims installed and a 3 1/8” mounting width without Joint Shims installed. These come RAW FINISH meaning no paint and no powder coat.
These axle brackets are for those who want to achieve the “Traction Bar” look on their Ram 2500 trucks with the COIL SPRING rear end from years 2014 to 2026. These will NOT work for the pre 2014 model trucks and will NOT fit the 1500 or 3500 trucks. Again, will NOT fit the 1500 and 3500 trucks. Only fits 2500 trucks with the coil spring rear suspension from 2014 to 2026.
These brackets will delete your factory rear lower links so you can attach your favorite brand Traction Bars. These are the axle brackets ONLY. This is not a full bar kit. ONLY axle brackets with associated hardware. We will be releasing a full bar kit very soon.
The bracket attach on the back side of the axle at the sway bar mount and wrap around the bottom of the axle and tie into the factory lower control arm pockets.Requires drilling one 1/2” hole on each side and everything bolts right in.
Whats included:-(2) axle brackets. One Left side and One Right side-(4) 3/8” bolts with washers and locking nuts-(2) 1/2” bolts with washers and locking nuts-(4) Joint Shims-Install Instructions, completely Bolt-On, NO WELDING.
You must buy or build lower bars to run this bracket kit. These absolute will NOT work with factory lower link bars as they must be removed with new “Traction Bars” installed. Adjustable mounting holes for trucks from a 3” Lowering kit to 8”+ lift kits.
Any questions please reach out for assistance! We are a small shop in Ohio that love to work hand and hand with our customers.
