SINCERE GEAROEM HYBRID • ABS • ELECTRONIC BRAKE COMPONENTS2016-2022 Toyota Prius Hybrid
ABS Brake Actuator / Brake Booster Pump Assembly
XW50 / ZVW50 / ZVW51 / ZVW55 • 1.8L Hybrid • OEM 44510-47070 / 44050-47060 / 47070-47090
⚠ VIN & ORIGINAL PART NUMBER VERIFICATION REQUIRED
DO NOT RELY SOLELY ON MODEL YEAR OR COMPATIBILITY.Please compare all numbers on your original ABS actuator / brake booster pump and provide the complete 17-digit VIN before installation.
IMPORTANT ITEM INFORMATIONTOYOTA HYBRID ELECTRO-HYDRAULIC BRAKE SYSTEMABS ACTUATOR / SKID CONTROL ACTUATOR APPLICATIONBRAKE BOOSTER PUMP / ACCUMULATOR APPLICATIONPROFESSIONAL BLEEDING / INITIALIZATION / CALIBRATION REQUIREDVehicleToyota Prius / Prius AWD-e / Prius Prime — verify applicationModel Years2016-2022 Prius XW50 GenerationPlatform / ChassisXW50 / ZVW50 / ZVW51 / ZVW55Engine1.8L 2ZR-FXE HybridBrake Actuator Reference44510-47070 / 44050-47060Brake Booster Pump47070-47090SystemABS / VSC / Regenerative Brake Control / Brake AssistFitmentVIN and complete original part-number verification requiredWHY BUY FROM SINCERE GEAR?✓ Toyota OEM hybrid brake-system application✓ ABS actuator and booster-pump numbers clearly identified✓ XW50 Prius application-specific listing✓ VIN-based fitment support available✓ Carefully packaged hydraulic / electronic components✓ Nationwide shipping availableOEM / PART IDENTIFICATION
This listing covers qualifying Toyota hybrid brake-system components associated with the following identifiers:
- 44050-47060 — Toyota brake actuator assembly service part number
- 47070-47090 — brake booster pump assembly
Toyota dealer catalogs identify 44050-47060 as the Brake Actuator Assembly, including the ABS control module, modulator, pump/motor-related actuator components, for qualifying Prius-family applications.
Toyota separately catalogs 47070-47090 as the Brake Booster Pump Assembly. It is used on 2016-2022 Prius, 2017-2022 Prius Prime, and 2019-2022 Prius AWD-e applications, among other Toyota hybrid vehicles.
⚠ ACTUATOR AND BOOSTER PUMP ARE DISTINCT COMPONENTS
THE ABS ACTUATOR AND BRAKE BOOSTER PUMP ARE RELATED PARTS OF THE SAME BRAKE SYSTEM, BUT THEY ARE NOT THE SAME SERVICE COMPONENT.
Toyota catalogs the two assemblies separately:
- 47070-47090 — electric brake booster pump / accumulator assembly
ONLY COMPONENTS SHOWN IN THE LISTING PHOTOS ARE INCLUDED
If your listing shows both the actuator and booster pump, they are sold as the pictured assembly.If only one unit is shown, do not assume the other component is included.
4TH GENERATION PRIUS / XW50 FITMENT
For North American Prius applications, the fourth-generation XW50 platform covers the 2016-2022 model years.
Known chassis applications include:
- ZVW50 — Prius Hybrid
- ZVW51 — Prius Hybrid
- ZVW55 — Prius AWD-e / E-Four
- ZVW52 — Prius Prime / Plug-In Hybrid — verify individual component number
2023 PRIUS IS NOT XW50
The redesigned 2023 Toyota Prius is the fifth-generation Prius and uses a different platform and brake-system configuration.Do not advertise this XW50 assembly as a 2023 Prius part without VIN-specific confirmation.
ADDITIONAL TOYOTA HYBRID APPLICATIONS
Some of these component numbers are also cataloged on other Toyota TNGA-based hybrid vehicles.
For example, Toyota catalog data shows 47070-47090 on selected Toyota Corolla Hybrid applications in addition to Prius-family vehicles.
Independent interchange data also associates 44510-47070 and related components with certain Toyota C-HR 1.8L Hybrid applications.
Do not use those broader applications as automatic interchange. Exact actuator, pump, bracket, software, and hydraulic configurations must be checked by VIN.
⚠ BRAKE SYSTEM SAFETY COMPONENT
This assembly is part of the vehicle's electronically controlled hydraulic brake system and works with ABS, Vehicle Stability Control, regenerative braking, and related safety functions.
Installation should only be performed by a qualified Toyota / hybrid / ABS repair facility with the correct diagnostic and brake-service equipment.
IMPROPER INSTALLATION, AIR BLEEDING, INITIALIZATION, OR CALIBRATION CAN RESULT IN REDUCED BRAKING PERFORMANCE, WARNING LIGHTS, STORED FAULT CODES, OR UNSAFE VEHICLE OPERATION.INSTALLATION & SERVICE REQUIREMENTS
Professional installation is strongly required for this component.
The installer should:
- Verify all OEM numbers before removing the original unit
- Compare hydraulic ports and electrical connectors
- Inspect the vehicle brake system for leaks or contamination
- Use the correct Toyota-specified brake fluid
- Follow Toyota's specified actuator / booster-pump replacement procedure
- Perform the required electronically controlled brake-system bleed procedure
- Use a compatible diagnostic scan tool where required
- Perform applicable linear-solenoid valve offset learning / initialization
- Perform applicable zero-point calibration
- Clear and recheck ABS / VSC / ECB diagnostic trouble codes
- Verify proper booster-pump operation and accumulator pressure
- Confirm normal brake-pedal feel before road testing
- Verify ABS, VSC, regenerative braking, and warning-light operation
THIS REPAIR IS NOT A BASIC MANUAL BRAKE BLEED
Toyota hybrid electronically controlled brake systems may require scan-tool-assisted bleeding and initialization procedures. Follow the applicable Toyota service information for the exact VIN and component being replaced.
IMPORTANT:Installation labor, diagnostics, brake fluid, bleeding, programming, initialization, calibration, towing, vehicle downtime, and related repair costs are not included unless specifically agreed to in writing.FITMENT VERIFICATION
Do not purchase this component solely because your vehicle is a Toyota hybrid or fourth-generation Prius.
Before ordering, please verify:
- Complete 17-digit VIN
- Vehicle model and model year
- Chassis code
- Hybrid / Plug-In Hybrid / AWD-e configuration
- Original brake actuator number
- Original booster-pump number
- Electrical connector configuration
- Hydraulic line / port configuration
- Mounting-bracket configuration
MATCH THE ORIGINAL NUMBERS BEFORE INSTALLATION.IF THE PART NUMBER, CONNECTORS, HYDRAULIC PORTS, OR BRACKET CONFIGURATION DIFFER FROM YOUR ORIGINAL COMPONENT, VERIFY COMPATIBILITY BEFORE PROCEEDING.CONDITION & INCLUDED COMPONENTS
Please inspect all listing photographs carefully for exact condition and included components.
Depending on the specific item photographed, the assembly may include:
- Brake actuator / hydraulic modulator
- ABS / skid-control electronic module
- Brake booster pump
- Pressure accumulator
- Mounting bracket
- Associated wiring or hardware where shown
Only items clearly visible in the listing photographs or specifically stated in writing are guaranteed to be included.
LIMITED PARTS WARRANTY
This component includes a limited parts warranty subject to Sincere Gear's applicable written warranty terms.
THE LIMITED WARRANTY DOES NOT COVER:
- Diagnostic charges
- Brake fluid or other consumables
- Brake-system bleeding
- Programming, initialization, or calibration
- Vehicle wiring or connectors
- Hydraulic lines or hoses
- Master cylinder or unrelated brake components
- Damage caused by contaminated brake fluid
- Damage caused by improper installation
- Damage caused by incorrect fitment
- Collision or impact damage
- External electrical faults
- Towing or transportation
- Vehicle downtime
- Incidental or consequential expenses
PART NUMBER REFERENCE
For search and identification purposes:
- 44050-47060 / 4405047060
- 47070-47090 / 4707047090
These numbers may appear on related components within the same Toyota hybrid brake-system assembly. They should not be treated as three names for one identical physical component.
NOT SURE IF THIS ABS / BOOSTER ASSEMBLY FITS YOUR PRIUS?Send us your 17-digit VIN and clear photos of all part-number labels on your original brake components through messages.We would rather verify the brake-system configuration before shipment than have you receive an incompatible safety component.Product Description / Search Terms:2016 2017 2018 2019 2020 2021 2022 Toyota Prius ABS actuator. Toyota Prius brake booster pump. Prius XW50 ABS pump. Toyota hybrid brake actuator. OEM 44510-47070. 4451047070 ABS actuator. 44050-47060 brake actuator assembly. 4405047060. 47070-47090 brake booster pump. 4707047090 accumulator pump. Prius ZVW50 brake actuator. Prius ZVW51 ABS pump. Prius ZVW55 AWD-e brake booster. Prius Prime hybrid brake actuator. Toyota hybrid ABS hydraulic control module. VIN and original-part verification required before installation.SINCERE GEAR LLC
OEM Electronics • Hybrid Components • ABS / Brake Components • Drivetrain Components • Nationwide Shipping
