4X Wheel Hub Bearings Front Rear For 2009 2010 2011-2019 Dodge Journey 2.4L 3.6L For Sale - New and Used

Product Features:

• Fits LH (Driver Side) & RH (Passenger Side) Front + Rear
• Fits 5 LugsWheels
• Wheel studs already installed
• ABS Type: Encoder (Front); Sensor Wire (Rear)

Item Description:

4X Wheel Hub Bearings Front Rear For 2009 2010 2011-2019 Dodge Journey 2.4L 3.6L

Product Features:

• Fits LH (Driver Side) & RH (Passenger Side) Front + Rear
• Fits 5 LugsWheels
• Wheel studs already installed
• ABS Type: Encoder (Front); Sensor Wire (Rear)

Item Description:

• Brand New Wheel Hub Assembly
• Direct replacement
• Built to strict quality control standards
• Replaces dealer part numbers: 513286, 512479, 512478, WA512478, 29512478, 7203100, 40263005E, HA590362, HA590362, BR930879, 712478, 40263005, 04779797AA, 05171125AA, 05171125AB, 05171125AC, 05171125AD, 05171125AE, 4779797AA, 68184743AA, 68184743AB, 68184742AC, 68184742AA, 05171124AE, 05171124AD, 05171124AC, 05171124AB, 05171124AA, 04779796AB, 04779796AA, 559748L, 123479, WE61364, WA512479, HA590361, BR930869, 720-3090

Vehicle Fitment:

• Fits Dodge Journey Include:
  • (2) Front Wheel Hub Bearing - 513286
  • (1) Rear Left Wheel Hub Bearing - 512478
  • (1) Rear Right Wheel Hub Bearing - 512479

  Exploded View:

  1. Wheel hub and bearing
  2. Cotter pin
  3. Nut retainer
  4. Wheel hub lock nut
  5. Hub bolt
  6. Splash guard
  7. Steering
  8. Remove the bolt (1) and separate the front wheel sensor from the steering knuckle.?
  9. Remove brake caliper torque member bolts, leaving brake hose attached, reposition the caliper aside with wire.
  10. Put alignment marks (A) on disc brake rotor and wheel hub and bearing. Remove disc brake rotor.
  11. Remove cotter pin and the nut retainer,Loosen the wheel hub lock nut from the drive shaft using power tool.
  12. Using a piece of wood and a suitable tool, tap on the lock nut to disengage the drive shaft from the wheel hub and bearing.
  13. Remove the engine side cover.
  14. Remove the lower nut and bolt from the steering knuckle,Separate transverse link from steering knuckle.
  15. Separate drive shaft from wheel hub and bearing, Reposition the drive shaft aside with wire.
  16. Remove the wheel hub and bearing bolts using power tool.
  17. Remove the splash guard and the wheel hub and bearing from the steering
  18. Failure to separate the front wheel sensor from the steering knuckle may result in damage to the front wheel sensor;
  19. Pull out the front wheel sensor, being careful to turn it as little as possible.
  20. Do not pull on wheel after removel : Check components for deformationy,cracksy,and other damagey,and boots of transverse link ball joint for cracksy,axial end play,and swing is in the reverse order of the
  21. Do not reuse the wheel stud.
  22. Do not reuse the cotter pin.
  23. Place a washer (A) as shown to install the wheel studs (1) by using the tightening force of the nut (B).
  24. Clean the mating surfaces of the joint sub-assembly and the wheel hub and bearing. Apply lubricant to the surface (A) of the joint sub-assembly.
  25. Hold the wheel hub and bearing using a suitable tool. Tighten the wheel hub lock nut

  6. Since the drive shaft is assembled by press-fitting, use a torque wrench to tighten the wheel hub lock nut. Do not use a power tool.

  7. Too much torque causes axle noise. Too little torque causes wheel bearing looseness. Tighten the wheel hub lock nut to the specification.

  8. When installing a the cotter pin (1) and the nut retainer (2), securely bend the cotter pin to prevent rattles.

  9. Align the matching marks (A) on the disc brake rotor and on the wheel hub and bearing.

  
  Item SpecificsBrand ECCPPManufacturer Part Number ECP829768HKABS Sensor Sensor WirePlacement on Vehicle FrontMaterial SteelFinish Polished, Rust ProtectedType Wheel Hub & Bearing AssemblyOE/OEM Part Number 513286Quantity 4Fitment 2009-2019 Dodge Journey SE Crossroad Plus SXT R/T FWD AWDInterchange Part Number BR930700, WE61249, HA590344, 68184748AB, 05171125AD, 05171124ABSuperseded Part Number BR930879, HA590362, WE61364, HA590361, BR930869, 68184743ABAnti-lock Braking System YesBolt Pattern 5 x 5 in (5 x 127 mm)Spline Quantity 32Driven Or Non-Driven Type Hub Assembly DrivenBolt Circle Diameter 5 in. / 127 mmBrake Pilot Diameter 2.85 in. / 72.5 mmFlange Bolt Hole Quantity 4Flange Bolt Size M10x1.5Flange Bolts Included NoKnuckle Bolt Circle Diameter 4.33 in. / 110 mmFlange Diameter 6.38 in. / 162 mmFlange Offset 1.91 in. / 48.6 mmFlange Shape RectangularHub Pilot Diameter 3.35 in. / 85 mmWheel Pilot Diameter 2.81 in. / 71.4 mmWheel Stud Quantity 5Wheel Stud Size M12x1.5Wheel Studs Included Yes Item SpecificsBrand ECCPPManufacturer Part Number ECP829768HKABS Sensor Sensor WirePlacement on Vehicle FrontMaterial SteelFinish Polished, Rust ProtectedType Wheel Hub & Bearing AssemblyOE/OEM Part Number 513286Quantity 4Fitment 2009-2019 Dodge Journey SE Crossroad Plus SXT R/T FWD AWDInterchange Part Number BR930700, WE61249, HA590344, 68184748AB, 05171125AD, 05171124ABSuperseded Part Number BR930879, HA590362, WE61364, HA590361, BR930869, 68184743ABAnti-lock Braking System YesBolt Pattern 5 x 5 in (5 x 127 mm)Spline Quantity 32Driven Or Non-Driven Type Hub Assembly DrivenBolt Circle Diameter 5 in. / 127 mmBrake Pilot Diameter 2.85 in. / 72.5 mmFlange Bolt Hole Quantity 4Flange Bolt Size M10x1.5Flange Bolts Included NoKnuckle Bolt Circle Diameter 4.33 in. / 110 mmFlange Diameter 6.38 in. / 162 mmFlange Offset 1.91 in. / 48.6 mmFlange Shape RectangularHub Pilot Diameter 3.35 in. / 85 mmWheel Pilot Diameter 2.81 in. / 71.4 mmWheel Stud Quantity 5Wheel Stud Size M12x1.5Wheel Studs Included Yes
  WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
  • PayPalpreferred.
  Picture
  Hot Item Front Wheel Hub Bearing For Chevy Monte Carlo Impala Cadillac Eldorado DTS FWD USD 40.38 Pair Manual Adjust Tow Mirrors For 1988-1998 Chevy GMC C K 1500/2500/3500 USD 62.99 ECCPP 2 Pcs Wheel Hub Bearing Front For Buick LaCrosse Century Regal Lesabre FWD USD 60.95 Universal 12V Low Pressure 5-9 PSI Electric Fuel Pump Installation Kit E8012S USD 14.15 Pair For 2007-2014 Chevy Silverado Sierra Towing Power Heated LED Signal Mirrors USD 124.69 Shop CategoryStore Home Air Dryer Car Tools◈Car Tools◈Electric Winch Tow◈Jack Stand◈Jumper Cable◈Removal Tool◈Tire Pressure Gauge Clutch System◈Clutch Slave Cylinder Cooling System◈AC Compressor◈Air Blend Door Actuator◈Blower Motor Resistor◈Condenser◈Coolant Tank◈Cooling Fan◈Evaporator◈Heater Control Valve◈Heater Hose◈Radiator Support◈Thermostat Housing◈Water Pump◈Water Pump Impeller Copper Tube◈ATV Brake Caliper◈ATV Brake Master Cylinder◈Brake caliper◈Brake drum shoe◈Brake lines kit◈Brake rotor pad◈Brake Shoe◈Clutch Lever◈Power Brake Booster Crankshaft And Camshaft◈Camshaft & Crankshaft◈Harmonic Banlancer◈Timing Chain Kit Drive Belt And Device◈Primary Drive Clutch◈Serpentine Belt Tensioner◈Wear Ring Drive Shaft And Half Shaft◈4 Pcs Wheel Hub Bearing◈C Notch & Flip Kit◈CV Axle◈CV Axle Boot◈Driveshaft◈Rear Wheel Axle◈Wheel Hub Bearing◈Wheel Hub Bearing Knuckle◈Wheel Hub Centric Rings◈Wheel Spacers Engine Bracket Glue◈Engine Mount Engine Gasket & Cylinder Head◈Carbon Seal◈Cylinder Head◈Cylinder Piston Gasket Kit◈Head Gasket Set Fuel System◈Car Carburetor◈Fuel Cell Gas Tank◈Fuel Injectors◈Fuel Pump Assembly◈Fuel Tank Pipe & Cap◈Fuel Tank Valve & Regulator◈Mass Air Flow Sensor◈Motorcycle Carburetor & Parts◈Oil Fuel Hose◈Purge Valve◈Vacuum Pump Gas Distribution System◈Diesel Emissions Fluid Pump◈Hydraulic Lifter & Rocker Arms◈Idle Air Control Valve◈Intake Carburetor Boot◈Secondary Air Pump◈Throttle Body◈Turbocharger◈Valve Cover Golf Series Home gardening◈Courtyard And Outdoor Supplies Ignition System◈ATV Ignition Coil◈Fuse Box◈Glow Plugs◈Ignition Coil & Spark Plug◈Ignition Coils◈Ignition Distributor◈Spark Plug Wire Set◈Wiring Harness Inner Parts◈Air Cleaner Box Assembly◈Car Floor Mats◈Car Seat Cover◈Cargo Cover◈Center Console◈Dash Cover & Cushion◈Fastener◈Remote Key◈Shift Knob Lever Head◈Steering Wheel & Adapter◈Sun Visor Lawn Mower Parts Light products◈Exterior Lights◈Fog Light◈Headlight Assembly◈Instrument Panel Lights◈Interior Lights◈Led Headlights◈Motorcycle Light◈Side/Cab Marker Lights◈Special Model Lights◈Third Brake Lights Lubrication System◈Dipstick◈Engine Oil Cooler◈Oil Pan◈Oil Pump Other Parts◈Shackle Kit◈Wheel Lug NutsNew List Item For 1988 89 90 91 1992 Jeep Comanche Stainless Steel Extended Rear Brake Lines USD 37.99 5pcs 264145BK SMOKE Lens Cab Marker Light+T10 5050 Amber LED for Dodge Ram USD 29.99 10X T5 3-SMD Green Dashboard Gauge Instrument Cluster LED Light 73 74 70 37 17 USD 8.58 4x HID White 360 Degree 5-SMD 168 194 5050 LED Bulbs For License Plate Lights USD 8.02 4 Super White Car Interior/Backup/License Plate LED Light Bulbs T10 168 194 921 USD 8.02 4X Wheel Hub Bearings Front Rear For 2009 2010 2011-2019 Dodge Journey 2.4L 3.6L

  Product Features:

  • Fits LH (Driver Side) & RH (Passenger Side) Front + Rear
  • Fits 5 LugsWheels
  • Wheel studs already installed
  • ABS Type: Encoder (Front); Sensor Wire (Rear)

  Item Description:

  • Brand New Wheel Hub Assembly
  • Direct replacement
  • Built to strict quality control standards
  • Replaces dealer part numbers: 513286, 512479, 512478, WA512478, 29512478, 7203100, 40263005E, HA590362, HA590362, BR930879, 712478, 40263005, 04779797AA, 05171125AA, 05171125AB, 05171125AC, 05171125AD, 05171125AE, 4779797AA, 68184743AA, 68184743AB, 68184742AC, 68184742AA, 05171124AE, 05171124AD, 05171124AC, 05171124AB, 05171124AA, 04779796AB, 04779796AA, 559748L, 123479, WE61364, WA512479, HA590361, BR930869, 720-3090

  Vehicle Fitment:

  • Fits Dodge Journey Include:
    • (2) Front Wheel Hub Bearing - 513286
    • (1) Rear Left Wheel Hub Bearing - 512478
    • (1) Rear Right Wheel Hub Bearing - 512479

    Exploded View:

    1. Wheel hub and bearing
    2. Cotter pin
    3. Nut retainer
    4. Wheel hub lock nut
    5. Hub bolt
    6. Splash guard
    7. Steering
    8. Remove the bolt (1) and separate the front wheel sensor from the steering knuckle.?
    9. Remove brake caliper torque member bolts, leaving brake hose attached, reposition the caliper aside with wire.
    10. Put alignment marks (A) on disc brake rotor and wheel hub and bearing. Remove disc brake rotor.
    11. Remove cotter pin and the nut retainer,Loosen the wheel hub lock nut from the drive shaft using power tool.
    12. Using a piece of wood and a suitable tool, tap on the lock nut to disengage the drive shaft from the wheel hub and bearing.
    13. Remove the engine side cover.
    14. Remove the lower nut and bolt from the steering knuckle,Separate transverse link from steering knuckle.
    15. Separate drive shaft from wheel hub and bearing, Reposition the drive shaft aside with wire.
    16. Remove the wheel hub and bearing bolts using power tool.
    17. Remove the splash guard and the wheel hub and bearing from the steering
    18. Failure to separate the front wheel sensor from the steering knuckle may result in damage to the front wheel sensor;
    19. Pull out the front wheel sensor, being careful to turn it as little as possible.
    20. Do not pull on wheel after removel : Check components for deformationy,cracksy,and other damagey,and boots of transverse link ball joint for cracksy,axial end play,and swing is in the reverse order of the
    21. Do not reuse the wheel stud.
    22. Do not reuse the cotter pin.
    23. Place a washer (A) as shown to install the wheel studs (1) by using the tightening force of the nut (B).
    24. Clean the mating surfaces of the joint sub-assembly and the wheel hub and bearing. Apply lubricant to the surface (A) of the joint sub-assembly.
    25. Hold the wheel hub and bearing using a suitable tool. Tighten the wheel hub lock nut

    6. Since the drive shaft is assembled by press-fitting, use a torque wrench to tighten the wheel hub lock nut. Do not use a power tool.

    7. Too much torque causes axle noise. Too little torque causes wheel bearing looseness. Tighten the wheel hub lock nut to the specification.

    8. When installing a the cotter pin (1) and the nut retainer (2), securely bend the cotter pin to prevent rattles.

    9. Align the matching marks (A) on the disc brake rotor and on the wheel hub and bearing.

    Item SpecificsBrand :ECCPPManufacturer Part Number :ECP829768HKABS Sensor :Sensor WirePlacement on Vehicle :FrontMaterial :SteelFinish :Polished, Rust ProtectedType :Wheel Hub & Bearing AssemblyOE/OEM Part Number :513286Quantity :4Fitment :2009-2019 Dodge Journey SE Crossroad Plus SXT R/T FWD AWDInterchange Part Number :BR930700, WE61249, HA590344, 68184748AB, 05171125AD, 05171124ABSuperseded Part Number :BR930879, HA590362, WE61364, HA590361, BR930869, 68184743ABAnti-lock Braking System :YesBolt Pattern :5 x 5 in (5 x 127 mm)Spline Quantity :32Driven Or Non-Driven Type Hub Assembly :DrivenBolt Circle Diameter :5 in. / 127 mmBrake Pilot Diameter :2.85 in. / 72.5 mmFlange Bolt Hole Quantity :4Flange Bolt Size :M10x1.5Flange Bolts Included :NoKnuckle Bolt Circle Diameter :4.33 in. / 110 mmFlange Diameter :6.38 in. / 162 mmFlange Offset :1.91 in. / 48.6 mmFlange Shape :RectangularHub Pilot Diameter :3.35 in. / 85 mmWheel Pilot Diameter :2.81 in. / 71.4 mmWheel Stud Quantity :5Wheel Stud Size :M12x1.5Wheel Studs Included :Yes Item SpecificsBrand ECCPPManufacturer Part Number ECP829768HKABS Sensor Sensor WirePlacement on Vehicle FrontMaterial SteelFinish Polished, Rust ProtectedType Wheel Hub & Bearing AssemblyOE/OEM Part Number 513286Quantity 4Fitment 2009-2019 Dodge Journey SE Crossroad Plus SXT R/T FWD AWDInterchange Part Number BR930700, WE61249, HA590344, 68184748AB, 05171125AD, 05171124ABSuperseded Part Number BR930879, HA590362, WE61364, HA590361, BR930869, 68184743ABAnti-lock Braking System YesBolt Pattern 5 x 5 in (5 x 127 mm)Spline Quantity 32Driven Or Non-Driven Type Hub Assembly DrivenBolt Circle Diameter 5 in. / 127 mmBrake Pilot Diameter 2.85 in. / 72.5 mmFlange Bolt Hole Quantity 4Flange Bolt Size M10x1.5Flange Bolts Included NoKnuckle Bolt Circle Diameter 4.33 in. / 110 mmFlange Diameter 6.38 in. / 162 mmFlange Offset 1.91 in. / 48.6 mmFlange Shape RectangularHub Pilot Diameter 3.35 in. / 85 mmWheel Pilot Diameter 2.81 in. / 71.4 mmWheel Stud Quantity 5Wheel Stud Size M12x1.5Wheel Studs Included Yes
    WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
    • PayPalpreferred.

    ​

    ​

    
    

    Copyright of eccppautoparts. All rights reserved.

    
    
    
    

    ---