Tech Data: 32mm Thick 5x110/5x112 to 5x120 Wheel Adapter ? Bolt Pattern To Hub: 5x110mm & 5x112 mm · Bolt Pattern To Wheel: 5x120 mm(4.75\") · Adapter Center Bore: 74.1 mm · Adapter Thickness: 32 mm(1.25\") ? full specs 25-Now
Huracan 15-24Sian 23Aventador 12-22Centenario 17-18Gallardo 04-14IMPORTANT FITMENT NOTICE: Before Install: ? for vehicles that fasten wheels with lug bolts - hub has threaded holes ? use only the included 28mm bolts on the hub side - a longer bolt bottoms out before it clamps ? included bo? \'s chart confirms thread pitch only ? unsure? Message us and we\'ll verify fitment before you buy. ESPLUS Company Logo ESPLUS precision wheel hardware ESPLUS
Precision wheel hardware Store Home Hot Products response Exact specificationsThread, seat, size and quantity Fitment before claimsVehicle and wheel checks separated Listing-level termsShipping and returns stay current message supportApplication context stays together Lug Nuts Mag Seat OEM Lug Nuts Duplex Conical OEM Lug Nuts Regular Acorn Lug Nuts Long Acorn Lug Nuts Open End Lug Nuts Spline Lug Nuts Lug Bolts Ball Seat Lug Bolts Cone Seat Lug Bolts Wheel Locks Locker Lug Nuts Locker Lug Bolts Wheel Spacers Hubcentric Spacer with Ball Seat Bolts Hubcentric Spacer with Cone Seat Bolts Wheel Adapters 5 Lug Adapter 6 Lug Adapter 8 Lug Adapter 5 Lug Hubcentric Adapter 6 Lug Hubcentric Adapter Precision wheel hardware · Fitment-first specification Wheel Adapter + Hub Bolt Kit Bolt Pattern Conversion Adapter Kit + 28mm Cone Seat Hub Bolts
4x Wheel Adapters Conversion 5x112 to 5x4.75 1.25 Thick for Lamborghini
Bolt-On Kit For Lug Bolt Hubs28mm Hub Bolts In The BoxNew 5x120.7 Wheels RequiredTwo Patterns, One AdapterWider Track, Better Stance Fitment-first engineering 01 · Order scopeConfirm the exact quantity.Use the listing title and the technical data as the order reference, not the vehicle photograph. 02 · Vehicle sideConfirm thread and application.Read the compatibility section and every fitment note before ordering. 03 · Wheel sideConfirm the actual wheel hardware.Match seat geometry, diameter, clearance, depth and usable thread engagement. Bundle Contents Two parts. One kit.
Each order ships as a complete, ready-to-install set ? measured and matched.
A 32mm Thick 5x110/5x112 to 5x120 Wheel Adapter Type · Double Drilled Adapter ×4 PCS/Set Bolt Pattern To Hub5x110mm & 5x112 mmBolt Pattern To Wheel5x120 mm(4.75\")Adapter Center Bore74.1 mmAdapter Thickness32 mm(1.25\")Adapter Outer Diameter150 mmStud Thread PitchM12x1.5Color and FinishChromeMaterial MadeT-6061 AluminumQuantity Per Order4 PcsCalifornia Prop 65 WarningWARNING: This product can expose you to chemicals including Nickel and Lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov. + B Lug Bolts Type · Cone Seat Extended Lug Bolt ×20 PCS/Set Thread PitchM14x1.5Lug Bolts Shank Length28 mmLug Bolts Flange23 mmLug Bolt Seat60 Degree ConicalColor and FinishBlackDrive17 mmTool Requirement17 mm SocketMaterial MadeSCM Carbon SteelQuantity Per Order20 PcsCalifornia Prop 65 WarningWARNING: This product can expose you to chemicals including Nickel and Lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov. Vehicle Compatibility Fits your car.
Verified, not guessed.
Aluminum wheel adapters with pre-pressed M12x1.5 studs plus 28mm cone seat hub bolts, for lug-bolt vehicles converting to 5x120.7 wheels; match your hub\'s bolt pattern before ordering.
1Brands 6Vehicles 3Regions EU Italy 1 Featured Lamborghini Italy · 6 models Bolt Pattern (PCD) Conv. New PCD Wheel Required5x120.7 HubCentric Support Use Same Thread Fastener New Thread Lug Nuts Req.M12x1.5 ModelRegionYear Range Aventador US/MX 2012-2022 Centenario MX 2017-2018 Gallardo US 2004-2014 Huracan CA/MX 2015-2024 Sian MX 2023 Temerario US 2025-Current
Not sure? Message us ? we verify your exact year & model before you buy.
Product Display A closer look at the main part.
Finish, geometry, and packaging — from every angle. Tap a thumbnail to view.
Product Display A closer look at the included hardware.
Finish, geometry, and packaging — from every angle. Tap a thumbnail to view.
Check Before You Order Some fitment details only your vehicle can tell you.
The vehicle list above confirms your year, make and model. The points below are not part of that list — they depend on the wheels and hardware currently on your vehicle. Please verify them before ordering.
Check Before You Order The same applies to the included hardware.
These checks apply to the hardware included in this kit. They depend on what is currently fitted to your vehicle, not on the year, make and model above.
Why It\'s Built Different Performance you can torque down. Complete Hub-Side Hardware
28mm cone seat bolts ship in the kit - factory-length shank threads straight into the hub, heads seated flush in the counterbores.
6061-T6 Aluminum Body
Both mounting faces machined flat and anodized against corrosion - the adapter seats true and stays true under wheel load.
Grade 10.9 Press-In Studs
SCM carbon steel studs come pre-pressed on the wheel side - M12x1.5 threads ready for your wheel-side lug nuts (not included).
Dual Drilled Input Face
Two factory patterns cut into one input face - a single adapter body that serves both hub drillings.
Opens 5x120.7 Wheel Fitment
Output face drilled 5x120.7 - run wheel families your factory pattern never accepted.
True Bolt-On Install
Adapter bolts to the hub, wheel mounts on the studs - no cutting, no permanent changes to the vehicle.
How to Install 3 steps to torque.
Follow the sequence below ? fitment is everything, so read Step 1 carefully.
01 Clean And Seat Adapter
Clean the hub face and threaded holes, remove any rust ring, then seat the adapter flat with its holes aligned to the hub.
Adapter must sit fully flat on the hub face 02 Bolt Adapter To Hub
Thread the included 28mm cone seat bolts through the adapter into the hub, then tighten evenly in a star pattern until the adapter sits flat.
Bolts go into the hub, never onto the adapter studs 03 Mount Wheel And Torque
Hang the wheel on the adapter studs, fit your wheel-side lug nuts, and torque to your vehicle spec in a star pattern.
Re-check torque after the first 50-100 miles 01 / 4 4 photos in this guide — tap the arrows or dots to see every step Important Fitment Notice Before Install:
- for vehicles that fasten wheels with lug bolts - hub has threaded holes
- use only the included 28mm bolts on the hub side - a longer bolt bottoms out before it clamps
- included bolts are sized to your hub\'s thread
- wheel-side lug nuts in M12x1.5 are not included - source before install
- new 5x120.7 wheels required - factory wheels no longer fit
- hand-start every bolt and nut - no impact guns
\'s compatibility list matches by vehicle only. The wheel-side facts above — seat geometry, hole clearance, installed depth and usable thread engagement — still need your own check. Message us through before ordering if anything is unclear.
Why ESPLUS Clarity before checkout.
Wheel hardware is fit-critical. Our listing structure keeps the evidence a buyer needs in the order it should be checked.
Specification First
Thread, seat, dimensions, finish and quantity are organized for direct comparison.
Fitment in Two Layers
Vehicle compatibility and wheel-specific hardware checks are presented separately.
Component-Level Detail
Combination listings keep each component\'s quantity, gallery and technical data distinct.
Pre-Purchase Support
Message us through with your year, model, wheel and current hardware details.
Questions, answered Check the details that decide fit. Will this wheel hardware fit my exact vehicle?Start with the vehicle compatibility section, then read every fitment note. Compatibility data does not replace wheel-side checks such as seat type, hardware dimensions, hole clearance and usable thread engagement. How do I confirm thread pitch and seat type?Compare one piece of your existing hardware with the technical data and the Check Before You Order images. Match the thread on the vehicle side and the seat geometry required by the wheel. What should I verify on aftermarket wheels?Confirm the wheel\'s seat profile, fastener-hole diameter, tool clearance, installed depth and required engagement. These wheel-specific facts are not established by year, make and model alone. What torque specification should I use?Use the vehicle or wheel manufacturer\'s applicable specification and installation procedure. If the two sources differ or the application is modified, consult a qualified installer before installation. Where can I find current shipping and return terms?Use the Shipping, delivery and Returns sections of this listing as the current order-level terms. Those listing controls take priority over general informational text. Shipping · Returns · Fitment Order terms, kept current.
The controls attached to this listing are the source of truth for the transaction.
Shipping
Review the handling time, delivery estimate and available services shown on this listing. Tracking is provided through the order when available.
Returns
The return window, eligibility and conditions shown in this listing govern the order. Start any return request from the purchase record.
Fitment Responsibility
Confirm the listed thread, seat, dimensions, clearance and quantity before installation. When uncertain, message us through before ordering.
About ESPLUS Precision wheel hardware.
Clarity built into every listing.
ESPLUS focuses on wheel fastening hardware and fitment-critical accessories. We organize product specifications, vehicle application data, wheel-side checks and installation guidance so buyers can compare the right facts before ordering.
Visit Our store Store Home response About Us Contact via Follow Store Copyright 2026 Eaglestart Supply Inc. · ESPLUS
