Fitment： - 2006-2010 For Hyundai Sonata
Why replace ball joints?Ball joints deteriorate if dirt, grit and impurities get inside or grease escapes, leading to a lack of lubrication. Added to this, rusting and general wear and tear also damage these suspension parts. The effects of this deterioration are excessive play and looseness (beyond the manufacturer’s specifications). While healthy ball joints allow for smooth movement from side to side, they shouldn’t wiggle or jolt up and down. This is a clear indicator that you need to look into ball joint replacement.Watch out for these symptoms of worn ball joints: 6P For 2006-10 Hyundai Sonata Front Control Arm And Ball Joint Sway Bar End Link
Fitment：
- 2006-2010 For Hyundai Sonata
Why replace ball joints?
Ball joints deteriorate if dirt, grit and impurities get inside or grease escapes, leading to a lack of lubrication. Added to this, rusting and general wear and tear also damage these suspension parts. The effects of this deterioration are excessive play and looseness (beyond the manufacturer’s specifications). While healthy ball joints allow for smooth movement from side to side, they shouldn’t wiggle or jolt up and down. This is a clear indicator that you need to look into ball joint replacement.
Watch out for these symptoms of worn ball joints:
- clunky, knocking noises, particularly when going over bumps
- creaky or squeaky noises when the suspension moves
- drifting to the side
- shaky or loose-feeling steering
- uneven or premature tyre wear or feathering
Here are the steps to replace the ball joints on your suspension:
- Park the car on stable ground in a garage or parking lot
- Use a car jack to lift the car, and chock the rear wheels so that the car will not roll away.
- Take off the wheel and place it securely away from the car
- Undo the brake callipers, brake rotors and all the hydraulics attached to it
- Take off sway bars that may be attached to the wheel hub
- Separate the upper control arm and lower control arm from the suspension using a ball joint fork. Detach the steering knuckle and coil spring
- You may require a mallet to force the steering knuckle away from the ball joint
- The ball joint needs to be removed from its housing. Take away any snap rings that are holding the ball joint in place
- The ball joint press should be used to remove the ball joint from the control arm
- Inspect the ball joint for any signs of damage or defects. A service manual will describe the state of a worn-out ball joint
- The new ball joint should be pressed into the control arm using the ball joint press
Notes：
- Please check the fitment chart above before payment making sure all the suspension parts listed on this page are compatible with your automobile.
- Please refer to Moog official website before narrowing down your search so as to avoid unnecessary item not as described return requests.
Package Includes：
- 2x Part# Front Lower Ball Joint
- 1x Part#Front Lower Control Arm - Driver Side
- 1x Part#Front Lower Control Arm - Passenger Side
- 1x Part#Front Upper Control Arm And Ball Joint - Passenger Side
- 1x Part#Front Upper Control Arm And Ball Joint - Driver Side
- 2x Part#Front Sway Bar End Link
Item SpecificsBrand QualitipartsManufacturer Part Number 13633206Type Control Arm & Ball Joint AssemblyCustom Bundle YesOE/OEM Part Number stabilizer anti sway bar linkageManufacturer Warranty 1 YearAdjustable YesKit Parts Included As picture shownFeatures GreasableSurface Finish PolishedFinish CoatedPlacement on Vehicle Front Lower UpperItems Included Mounting HardwareSuperseded Part Number suspension control armModified Item NoKit or Single Part KitOE Spec or Performance/Custom OE SpecQuantity 6 PcsCotter Pin Hole YesMounting Style Bolt-OnMaterial Alloy SteelPerformance Part NoUniversal Fitment NoVintage Car Part No
About Us:
We are committed to making the best autoparts products and providing you with better services.
So if you have any quesiton or problem, please fell free to contact us about that.
Payment:
Any payments that will be accpeted by are all available.
Shipping:
2-8 working days in transit.
Product will be shipped within 2 business days after full payment is received and verified.
USPS, UPS, FedEx shipping will be provided.
Delivery time is about 2-8 business days to most of addresses.
Returns:
30-day free return is provided.
Any problem for our package / item / or our service, please feel free to contact us, we will solve the problem asap.
Contact Us:
Any quesiton or problem, do contact us please.
We are always online to answer.
Note: Do check the compatible chart before paying the items, or contact us for checking the compatibilities for your vehicles/cars/trucks.
About Us:Payment:Shipping:Returns:Contact Us: Shop CategoryStore Home Wheel Spacers Wheel Hub Bearings Lift Kits Additional ABS Parts Suspension Kits Shocks, Struts & Assemblies Fuel Pump CV Axle Assemblies Alternators Driveshafts Gearbox, Rack & Pinion Parts Air Suspensions Shocks, Struts&Suspension Kits Adj.Height Shocks Door Handle Starter Motors Gasket SetHot Item 2pcs For 1997-2003 Ford F150 2WD Front Upper Control Arm Ball Joint Assembly USD 52.09 Alternator For High Output 105Amp 1-Wire 10SI Self-exciting SBC BBC GM ADR0151 USD 71.59 Alternator for Chevrolet Silverado 1500 2007-2013 4.8L 5.3L 6.0L 6.2L V8 160A USD 97.72 Alternator For Acura CL 1998-1999 & Honda Accord 1998-2002 2.3L l4 31100PAA-A01 USD 71.67 8pcs For Ford Ranger 1998-2011 Front Upper Control Arms Ball Joints Tie Rods Kit USD 65.74 Picture
New List Item Rear Left & Right Pair Shock Absorber and Strut Assembly For BMW X5 2000-2006 USD 51.09 2pcs Fits Ford Fusion Titanium Sedan Front+Left+Right ABS Speed Sensor Assembly USD 20.51 2pcs 1\" 4x100 to 4x137 3/8\" studs wheel Adapter for Arctic Cat 400 4x4 Automatic USD 47.65 2pcs Full Loaded Front Quick Struts Shocks & Spring Assembly For Ford Focus 2.0L USD 104.33 2pcs Front Loaded Complete Struts w/ Coil Spring Assembly For Hyundai Accent GL USD 102.04 Help & InfoPayment PolicyShipping PolicyReturn PolicyFAQAbout Us 6P For 2006-10 Hyundai Sonata Front Control Arm And Ball Joint Sway Bar End Link
Fitment：
- 2006-2010 For Hyundai Sonata
Why replace ball joints?
Ball joints deteriorate if dirt, grit and impurities get inside or grease escapes, leading to a lack of lubrication. Added to this, rusting and general wear and tear also damage these suspension parts. The effects of this deterioration are excessive play and looseness (beyond the manufacturer’s specifications). While healthy ball joints allow for smooth movement from side to side, they shouldn’t wiggle or jolt up and down. This is a clear indicator that you need to look into ball joint replacement.
Watch out for these symptoms of worn ball joints:
- clunky, knocking noises, particularly when going over bumps
- creaky or squeaky noises when the suspension moves
- drifting to the side
- shaky or loose-feeling steering
- uneven or premature tyre wear or feathering
Here are the steps to replace the ball joints on your suspension:
- Park the car on stable ground in a garage or parking lot
- Use a car jack to lift the car, and chock the rear wheels so that the car will not roll away.
- Take off the wheel and place it securely away from the car
- Undo the brake callipers, brake rotors and all the hydraulics attached to it
- Take off sway bars that may be attached to the wheel hub
- Separate the upper control arm and lower control arm from the suspension using a ball joint fork. Detach the steering knuckle and coil spring
- You may require a mallet to force the steering knuckle away from the ball joint
- The ball joint needs to be removed from its housing. Take away any snap rings that are holding the ball joint in place
- The ball joint press should be used to remove the ball joint from the control arm
- Inspect the ball joint for any signs of damage or defects. A service manual will describe the state of a worn-out ball joint
- The new ball joint should be pressed into the control arm using the ball joint press
Notes：
- Please check the fitment chart above before payment making sure all the suspension parts listed on this page are compatible with your automobile.
- Please refer to Moog official website before narrowing down your search so as to avoid unnecessary item not as described return requests.
Package Includes：
- 2x Part# Front Lower Ball Joint
- 1x Part#Front Lower Control Arm - Driver Side
- 1x Part#Front Lower Control Arm - Passenger Side
- 1x Part#Front Upper Control Arm And Ball Joint - Passenger Side
- 1x Part#Front Upper Control Arm And Ball Joint - Driver Side
- 2x Part#Front Sway Bar End Link
Item SpecificsBrand :QualitipartsManufacturer Part Number :13633206Type :Control Arm & Ball Joint AssemblyCustom Bundle :YesOE/OEM Part Number :stabilizer anti sway bar linkageManufacturer Warranty :1 YearAdjustable :YesKit Parts Included :As picture shownFeatures :GreasableSurface Finish :PolishedFinish :CoatedPlacement on Vehicle :Front Lower UpperItems Included :Mounting HardwareSuperseded Part Number :suspension control armModified Item :NoKit or Single Part :KitOE Spec or Performance/Custom :OE SpecQuantity :6 PcsCotter Pin Hole :YesMounting Style :Bolt-OnMaterial :Alloy SteelPerformance Part :NoUniversal Fitment :NoVintage Car Part :No
About Us:
We are committed to making the best autoparts products and providing you with better services.
So if you have any quesiton or problem, please fell free to contact us about that.
Payment:
Any payments that will be accpeted by are all available.
Shipping:
2-8 working days in transit.
Product will be shipped within 2 business days after full payment is received and verified.
USPS, UPS, FedEx shipping will be provided.
Delivery time is about 2-8 business days to most of addresses.
Returns:
30-day free return is provided.
Any problem for our package / item / or our service, please feel free to contact us, we will solve the problem asap.
Contact Us:
Any quesiton or problem, do contact us please.
We are always online to answer.
Note: Do check the compatible chart before paying the items, or contact us for checking the compatibilities for your vehicles/cars/trucks.
All rights reserved.
