AC Condenser For 2013-2015 Chevrolet Malibu With Receiver Drier GM3030285 For Sale - New and Used

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

AC Condenser For 2013-2015 Chevrolet Malibu With Receiver Drier GM3030285:
$57.70

Product Description

Attention:To avoid product mismatch issues, please email us your VIN or old part photos after ordering.

AC Condenser For 2013-2015 Chevrolet Malibu With Receiver Drier GM3030285

Specifications:

Material: Aluminum

Color: Silver

Placement on Vehicle: Front

Quantity: 1

Core Height (IN): 388mm

Core Length (IN): 645mm

Core Thickness (IN): 16mm

Inlet Diameter (IN):φ20.1/φ11.8

Outlet Diameter (IN):φ17/φ8.6

Built-in Receiver/Dryer: Yes

Part Number:3794

Interchange Part Numbers:

22869501 23305638 3794 679-00343 7-3794 GM3030285, SBC3794

Fitment:

2010 Buick Allure A/C Condenser and Receiver Drier Assembly

2016-18 Buick Cascada A/C Condenser and Receiver Drier Assembly

2010-16 Buick LaCrosse A/C Condenser and Receiver Drier Assembly

2011-13 Buick Regal L4 2.4L A/C Condenser and Receiver Drier Assembly

2014-17 Buick Regal A/C Condenser and Receiver Drier Assembly

2012-17 Buick Verano A/C Condenser and Receiver Drier Assembly

2013-19 Cadillac XTS A/C Condenser and Receiver Drier Assembly

2011-15 Chevrolet Cruze A/C Condenser and Receiver Drier Assembly

2016 Chevrolet Cruze Limited A/C Condenser and Receiver Drier Assembly

2014-19 Chevrolet Impala A/C Condenser and Receiver Drier Assembly

2013-15 Chevrolet Malibu A/C Condenser and Receiver Drier Assembly

2016 Chevrolet Malibu Limited A/C Condenser and Receiver Drier Assembly

Package Include:

1pc AC Condenser

Features:

1. Built to strict quality control standards 100% factory tested

2. Easy Installation，100% Compatible with OEM Parts, meets Original Equipment Manufacturer (OEM) Standards

3. Mechanically tested prior to leaving the factory ensures optimal performance and enhanced durability.

4. Perfect match for the original car.

5. Louvered aluminum fins and tubes are bonded through a unique furnace-brazing process with premium quality aluminum for maximum heat dissipation.

6. The condenser is part of the A/C system. It receives the hot, high-pressure gaseous refrigerant from the compressor and cools it to a warm liquid state, although still under high pressure.

7. The Condenser is located right in front of the radiator. High pressure (hot) refrigerant travels through it and cools off as air passes through.

Attention:

Step 1: Disconnect Power Supply.

The first step, as with any project that involves electricity, will be to disconnect the power supply or turn it off at the breaker. Many central air conditioning units have their own 220 breaker. On others, the breaker will be in the breaker panel for the rest of the home.

Step 2: Test the Condenser

Testing the condenser will indicate if the problem is actually with the condenser, or with another component of the air conditioning unit. It will likely also be determined at this point if the condenser needs to be replaced with a newer model that is compatible with a newer type of coolant.

Step 3: Remove the Condenser

Once it has been confirmed that the problem with the air conditioning unit is in fact the condenser, it needs to be removed. The coolant lines will be clamped and cut, followed by the removal of the air conditioner condenser.

Step 4: Replace the Condenser

The new condenser is installed in place of the old one. The coolant lines will be reconnected with the condenser, usually with silver soldering. The clamps are removed and a vacuum is put on the system to remove any air from the lines and make sure coolant is at the proper levels. If it is not, the coolant may be replaced or added to (which is referred to as been charged or recharged). If a different type of condenser was needed due to using an obsolete type of coolant, other components such as controls and/or coils may also need to be replaced, but components such as ducts and blower will likely not need to be replaced.

Step 5: Testing the Air Conditioner

Once all of the above steps have been completed, the air conditioning system will need to be tested. The power supply needs to be restored, and the system turned on by setting the thermostat in the home to "cool" and lowering the desired temperature on the thermostat.This should initiate the air conditioner to start up. If it does not come on, additional testing of other components may be required.

Note:

1.Disconnect the negative battery cable.

2.Inspect the condenser for cracks that can lead to leaking.

3.Remove any grilles, supports, lock braces to gain access to the condenser.

4.Remove the condenser's refrigerant lines. Cap these lines immediately

5.Remove the condenser mounting bolts.

6.Pour a small amount of compressor oil into the line fittings. Reconnect the A/C lines. Replace all O-rings

7.Evacuate all remaining refrigerant using a specific AC machine that pulls a vacuum on the system.

8.Reconnect the battery cable.Test A/C system by measuring the temperature coming out of vents inside the id="tongtool-tab-li-1">About Us

Payment

Shipping

Returns

Welcome to goodluc-4931 store.As a leading and emerging company in manufacturer and exporting business,

we are specialized in AUTO PARTS and CONSTRUCTION MACHINERY PARTS products for more than 10 years.

We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you.

Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders.

We accept PayPalonly.

All major credit cards are accepted through secure payment processor PayPal.

NOTE: Import duties, taxes are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to offerding buying.

1. Item location:Guangdong,China

Item will be shipped out within 5 Days upon receipt of your payment. We ship the item through SpeedPAK & Expedited Shipping logistics channel.

DELIVERY DAYS: please expect 5-7 business days within US, 10-20 business days to Canada, up to 30 business days all around the world.

2. Item location:California, United States

Item will be shipped out within 1-2 upon receipt of your payment. Orders from the USA will all be shipped out via Carrier UPS OR USPS.

DELIVERY DAYS: Usually it takes up within 2-5 business days for delivery.

*NOTE: Please be aware that PO Box cannot receive items,please DO NOT fill in the PO Box address.

All of our items are backed with a 30-day return policy. We ensure all our items are new and in excellent condition prior to shipping. In case you receive the item that is not to the standards above, please contact us via e-Bay messages. All returns must be in new original condition as received and should be shipped with delivery confirmation
Please note that all returns must be pre-approved by us. Unauthorized returns will not be accepted. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation.
We ONLY accept returns with original package. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return.

Our office hours are 9:00 a.m to 5:00 p.m (GMT +8) of Monday to Saturday.

All emails will be responded to within24 hours

About Us