FWD For 2003-2011 Saab 9-3 2.0T Vector Aero 2X Rear Wheel Hub Bearings W/ ABS For Sale - New and Used

Application:

• Fits Saab 9-3 2003-2011 FWD Only
• Fits Saab 9-3X 2010-2011 FWD
• Position: Rear
• Bolt Pattern: 5x110
• Wheel Stud Size: 12x1.5
• Wheel Lugs: 5-Bolt
• Flange Style: 4-Bolt Trapezoid

• ABS Type: Integral ABS Sensor Connector
• Drive Type: FWD
• Replaces dealer part numbers: 512307, 1604314, 24421906, 51749115, 93170611, 712307, HA590290, 40738001E, WH512307, 7580040, 29512307, 101805, BHA50016, BHA50055, 693370, 051-6272, BR930686, WE60890, 770-0045, a car wheel bearing typically involves several steps and requires some mechanical knowledge and tools. Here's a general overview of the process:
  • Park your vehicle on a flat surface.

  Before you begin, park your vehicle on a level surface. Put the vehicle in park (or, for manuals, 1st, reverse, or neutral) and be sure to put the parking brake up.

  • Use wheel chocks to secure wheels whose bearings you aren't replacing.

  For added stability, it can be smart to use sturdy chocks to hold your vehicle's wheels in place.

  • Loosen the lug nuts and lift the wheel using a jack.

  For proper access to the internal components of the wheel whose bearings you're replacing, you'll need to elevate the wheel. Before you lift the wheel, however, you may want to slightly loosen the lug nuts with a tire iron, as breaking their initial resistance is harder without the ground holding the wheel steady. After this, carefully lift your wheel.
  To prevent dangerous slippage, make sure that the vehicle is securely seated on the jack and that the jack is flush with the ground before attempting to lift the wheel. It's also important to make sure the jack touches the vehicle on a sturdy, metal piece of the undercarriage, rather than on fragile plastic molding, as the weight of the vehicle can damage the latter.
  Most vehicles have jack points where the frame has extra support to lift the vehicle. It's best to check the owners manual to learn the best place to position your jack.

  • Unscrew the lug nuts and remove the wheel.

  The lug nuts, which you should have already loosened, should come off easily. Remove these and put them in a safe place where you won't lose them. Next, remove the wheel itself.

  • Remove the brake caliper.

  Using a socket and a ratchet, remove the caliper's bolts. Then, remove the caliper itself using a screwdriver.
  When removing the caliper, be careful not to let it dangle freely, as this can damage the brake hose. Instead, hook it on a secure part of the undercarriage or use a short length of string to tie it in place. A bungee cord or a bent wire hanger are two additional ways to secure the caliper.

  • Remove the dust cover, cotter pin, and castle nut.

  In the center of the vehicle's exposed rotor should be a small metal or plastic cap called the dust cover which protects the components holding the rotor in place. Since you'll need to remove the rotor, the cap and the components it protects will have to go. Usually, the dust cover can be removed by gripping it with calipers and tapping the calipers with a hammer. Inside, you'll find the castle nut, usually secured with a cotter pin. Remove the cotter pin with pliers or wire cutters, then unscrew the castle nut and remove it (and its washer).

  • Remove the rotor.

  Place your thumb securely on the peg in the middle of the rotor assembly. Firmly (but somewhat gently) bump the rotor itself with the palm of your other hand. The wheel's outer bearing should loosen or fall out. Remove the outer bearing. Finally, remove the rotor itself.

  • Unscrew the hub bolts and remove the old hub.

  The wheel bearing is inside the hub, which is usually held in place with several bolts that screw in from behind. These bolts can be tricky to reach because they're tucked away in the undercarriage, so you may want to use a skinny socket wrench and/or a breaker bar to loosen and remove them. When you've removed the bolts, take the hub off of the axle.

  Note that if you've purchased a new hub assembly, at this point, you can install the new hub and put the wheel back together and you'll be finished. To install a new set of bearings inside the hub, read on.

  • Disassemble the hub assembly.

  To gain access to the bearings, you'll need to take apart the hub. You'll probably need to use a wrench (and/or a hammer) to remove the end of the hub and any anti-lock brake wheel that may be part of your hub. Then, you may need to use a specialized "puller" tool to remove the central bolt. The bearing assembly should come apart easily.

  • Remove races and clean the knuckle.

  Removing the bearing assembly's races usually means physically breaking them with a grinder or hammer and chisel. Because of this, you'll want to have replacement races ready. After removing the races, it's a good idea to clean the inside of the bearing assembly around the knuckle.

  • Install new races and new wheel bearings.

  Set new races in place in the bearing assembly with a few taps from a hammer. Finally, grease a new inner bearing and install it in the assembly. Ensure the bearings are properly aligned, that they're pushed in as far as they can go, and that any sealing rings are flush with the outside of the assembly.
  Use lots of grease for your bearings. You can apply the grease by hand or with a special "bearing packer" tool. Rub plenty of extra grease around the outsides of your bearings and any sealing rings.

  • Replace all parts in reverse order.

  Put the hub assembly back together and install it on the axle shaft. Put the rotor back on and secure it in place with its bolts. Install a new, well-greased outer bearing at this point. Lightly tighten the castle nut and secure it in place with a new cotter pin. Replace the dust cap. Put the caliper and brake pads back in place and secure them with the appropriate bolts. Finally, put the tire back in place and secure it with lug nuts.

  
  Item SpecificsBrand PARTHIGHManufacturer Part Number PART802876HIGHABS Sensor Integral ABS Sensor ConnectorPlacement on Vehicle RearMaterial SteelSurface Finish Polished, Rust ProtectedType Wheel Hub & Bearing AssemblyOE/OEM Part Number 512307Quantity 2Fitment Saab 9-3 9-3X Sedan Wagon 2.0T Aero Arc Linear SE TurboX XWDFitment Note FWD (Front Wheel Drive) Model w/ 4-Wheel ABSDrive Type FWDInterchange Part Number HA590290, 051-6272, BR930686, WE60890, 770-0045, 1411-248476Anti-lock Braking System YesBolt Pattern 5 x 4.33 in (5 x 110 mm)Driven Or Non-Driven Type Hub Assembly Non-DrivenBolt Circle Diameter 4.33 in. / 110 mmBrake Pilot Diameter 2.57 in. / 65.4 mmFlange Bolt Hole Quantity 4Flange Bolt Size M10x1.25Flange Bolts Included YesFlange Diameter 5.51 in. / 140 mmFlange Offset 2.68 in. / 68 mmFlange Shape TrapezoidHub Pilot Diameter 2.76 in. / 70 mmWheel Pilot Diameter 2.56 in. / 65 mmWheel Stud Quantity 5Wheel Stud Size M12x1.5Wheel Studs Included NoSuperseded Part Number 1604314, 24421906, 51749115, 93170611, 29512307, V70-0366
  Warning

  WARNING: Cancer and Reproductive Harm - Customers should pay more attention about it.)

  Payment

  PayPal Only.

  Only PayPal accept in this selection.

  Shipping

  99% of orders shipped within 24 hours.

  2-8 days in transit.

  Nice and strongpacking.

  UPS, USPS,fedExcomes to be ourfirst choice.

  Return

  This item is backed by our 1-year warranty.

  Refund will be given as money back or replacement

  Item must be returned in original pacakge and packing the same as received.

  Seller isresponsible for the return if delivered item not the same as described orreceived are responsible for the return shipping cost if the problem ids caused by buyer.

  We only warranty cost of parts, any installation or other fees are non-refundable.

  About Us

  If you have a question about the itemyou should contact us before offerding.

  Any problem fund, do contact us please, any question or problem will be replied within 24 hours (except the weekend and holiday).

  Our Customer Service Team is always online to answer.

  Shop CategoryStore Home Mirrors Oxygen Sensors Mass Air Flow Sensors Cooling System◈Radiators◈Cooling Fans◈Fan Clutchs◈Intercoolers◈AC Condenser◈Radiator Support Roof Racks Tonneau Covers Window Visors LED Headlight Assembly Fuse Holder Box Windshield Outer Trim Pillar Posts Air Conditioning System◈Heater Cores◈Blower Motor◈Evaporators Running Board Motor Rear View Camera Center Console Window Scoop Louver Cover winch Door Handle Ignition Coils Light◈3rd Brake Light◈Cab/Side Marker◈Instrument Panel Light Window Regulator Brake Calipers & Bracket Strut Mount Cylinder Piston Kit Complete Struts CV Axle Engine Dipstick Ballast Module Throttle Body Shock Struts Air suspension Transfer Case Shift Motor Ignition Coils & Spark Plugs Turbocharger Bumper Window switch Suspension Kits Car CV Axle Wheel Spacers Wheel Hub Bearing Coilovers Shock Strut & Suspension Kit OtherHot Item Tow Mirrors Pair For 2004-14 Ford F-150 Power Heated Puddle Signal -Wholesale USD 90.75 A/C Blower Motor Resistor For 1999 00 01-2002 Chevrolet Silverado 1500 2500 Kit USD 42.99 For 1999-2006 Chevrolet Silverado 1500 Left+Right Side View Door Mirrors Manual USD 40.95 For 8500-13000LBS Winch Electric Waterproof Soft Winch Cover Dust Cover USD 15.39 4x Roof Rack Cover Rail End Shell Cap Replacement For Toyota Highlander 2008-13 USD 20.37 New List Item Roof Rack For Buick Envision 2016-2020 Cross Bar Top Rails Luggage Carrier Bar USD 76.49 2x For KIA Telluride 2019 2020 Roof Rack Carrier Luggage Cargo crossbar Aluminum USD 69.49 For 2004-2014 Nissan Titan Armada Front Struts Tie Rods Sway Bar Ball Joints USD 164.10 1pcs Roof Top Bicycle Universal Car Carrier Rack for one Bike cargo with lock USD 78.75 Roof Rack Carrier Cargo Cross Bars For Tahoe Suburban Avalanche/ GMC Yukon 07 USD 90.75 Excellent Delivery
  Help & InfoPayment PolicyShipping PolicyReturn PolicyFAQAbout Us FWD For 2003-2011 Saab 9-3 2.0T Vector Aero 2X Rear Wheel Hub Bearings W/ ABS

  Application:

  • Fits Saab 9-3 2003-2011 FWD Only
  • Fits Saab 9-3X 2010-2011 FWD
  • Position: Rear
  • Bolt Pattern: 5x110
  • Wheel Stud Size: 12x1.5
  • Wheel Lugs: 5-Bolt
  • Flange Style: 4-Bolt Trapezoid
  • ABS Type: Integral ABS Sensor Connector
  • Drive Type: FWD
  • Replaces dealer part numbers: 512307, 1604314, 24421906, 51749115, 93170611, 712307, HA590290, 40738001E, WH512307, 7580040, 29512307, 101805, BHA50016, BHA50055, 693370, 051-6272, BR930686, WE60890, 770-0045, a car wheel bearing typically involves several steps and requires some mechanical knowledge and tools. Here's a general overview of the process:
    • Park your vehicle on a flat surface.

    Before you begin, park your vehicle on a level surface. Put the vehicle in park (or, for manuals, 1st, reverse, or neutral) and be sure to put the parking brake up.

    • Use wheel chocks to secure wheels whose bearings you aren't replacing.

    For added stability, it can be smart to use sturdy chocks to hold your vehicle's wheels in place.

    • Loosen the lug nuts and lift the wheel using a jack.

    For proper access to the internal components of the wheel whose bearings you're replacing, you'll need to elevate the wheel. Before you lift the wheel, however, you may want to slightly loosen the lug nuts with a tire iron, as breaking their initial resistance is harder without the ground holding the wheel steady. After this, carefully lift your wheel.
    To prevent dangerous slippage, make sure that the vehicle is securely seated on the jack and that the jack is flush with the ground before attempting to lift the wheel. It's also important to make sure the jack touches the vehicle on a sturdy, metal piece of the undercarriage, rather than on fragile plastic molding, as the weight of the vehicle can damage the latter.
    Most vehicles have jack points where the frame has extra support to lift the vehicle. It's best to check the owners manual to learn the best place to position your jack.

    • Unscrew the lug nuts and remove the wheel.

    The lug nuts, which you should have already loosened, should come off easily. Remove these and put them in a safe place where you won't lose them. Next, remove the wheel itself.

    • Remove the brake caliper.

    Using a socket and a ratchet, remove the caliper's bolts. Then, remove the caliper itself using a screwdriver.
    When removing the caliper, be careful not to let it dangle freely, as this can damage the brake hose. Instead, hook it on a secure part of the undercarriage or use a short length of string to tie it in place. A bungee cord or a bent wire hanger are two additional ways to secure the caliper.

    • Remove the dust cover, cotter pin, and castle nut.

    In the center of the vehicle's exposed rotor should be a small metal or plastic cap called the dust cover which protects the components holding the rotor in place. Since you'll need to remove the rotor, the cap and the components it protects will have to go. Usually, the dust cover can be removed by gripping it with calipers and tapping the calipers with a hammer. Inside, you'll find the castle nut, usually secured with a cotter pin. Remove the cotter pin with pliers or wire cutters, then unscrew the castle nut and remove it (and its washer).

    • Remove the rotor.

    Place your thumb securely on the peg in the middle of the rotor assembly. Firmly (but somewhat gently) bump the rotor itself with the palm of your other hand. The wheel's outer bearing should loosen or fall out. Remove the outer bearing. Finally, remove the rotor itself.

    • Unscrew the hub bolts and remove the old hub.

    The wheel bearing is inside the hub, which is usually held in place with several bolts that screw in from behind. These bolts can be tricky to reach because they're tucked away in the undercarriage, so you may want to use a skinny socket wrench and/or a breaker bar to loosen and remove them. When you've removed the bolts, take the hub off of the axle.

    Note that if you've purchased a new hub assembly, at this point, you can install the new hub and put the wheel back together and you'll be finished. To install a new set of bearings inside the hub, read on.

    • Disassemble the hub assembly.

    To gain access to the bearings, you'll need to take apart the hub. You'll probably need to use a wrench (and/or a hammer) to remove the end of the hub and any anti-lock brake wheel that may be part of your hub. Then, you may need to use a specialized "puller" tool to remove the central bolt. The bearing assembly should come apart easily.

    • Remove races and clean the knuckle.

    Removing the bearing assembly's races usually means physically breaking them with a grinder or hammer and chisel. Because of this, you'll want to have replacement races ready. After removing the races, it's a good idea to clean the inside of the bearing assembly around the knuckle.

    • Install new races and new wheel bearings.

    Set new races in place in the bearing assembly with a few taps from a hammer. Finally, grease a new inner bearing and install it in the assembly. Ensure the bearings are properly aligned, that they're pushed in as far as they can go, and that any sealing rings are flush with the outside of the assembly.
    Use lots of grease for your bearings. You can apply the grease by hand or with a special "bearing packer" tool. Rub plenty of extra grease around the outsides of your bearings and any sealing rings.

    • Replace all parts in reverse order.

    Put the hub assembly back together and install it on the axle shaft. Put the rotor back on and secure it in place with its bolts. Install a new, well-greased outer bearing at this point. Lightly tighten the castle nut and secure it in place with a new cotter pin. Replace the dust cap. Put the caliper and brake pads back in place and secure them with the appropriate bolts. Finally, put the tire back in place and secure it with lug nuts.

    Item SpecificsBrand PARTHIGHManufacturer Part Number PART802876HIGHABS Sensor Integral ABS Sensor ConnectorPlacement on Vehicle RearMaterial SteelSurface Finish Polished, Rust ProtectedType Wheel Hub & Bearing AssemblyOE/OEM Part Number 512307Quantity 2Fitment Saab 9-3 9-3X Sedan Wagon 2.0T Aero Arc Linear SE TurboX XWDFitment Note FWD (Front Wheel Drive) Model w/ 4-Wheel ABSDrive Type FWDInterchange Part Number HA590290, 051-6272, BR930686, WE60890, 770-0045, 1411-248476Anti-lock Braking System YesBolt Pattern 5 x 4.33 in (5 x 110 mm)Driven Or Non-Driven Type Hub Assembly Non-DrivenBolt Circle Diameter 4.33 in. / 110 mmBrake Pilot Diameter 2.57 in. / 65.4 mmFlange Bolt Hole Quantity 4Flange Bolt Size M10x1.25Flange Bolts Included YesFlange Diameter 5.51 in. / 140 mmFlange Offset 2.68 in. / 68 mmFlange Shape TrapezoidHub Pilot Diameter 2.76 in. / 70 mmWheel Pilot Diameter 2.56 in. / 65 mmWheel Stud Quantity 5Wheel Stud Size M12x1.5Wheel Studs Included NoSuperseded Part Number 1604314, 24421906, 51749115, 93170611, 29512307, V70-0366
    Warning

    WARNING: Cancer and Reproductive Harm - Customers should pay more attention about it.)

    Payment

    PayPal Only.

    Only PayPal accept in this selection.

    Shipping

    99% of orders shipped within 24 hours.

    2-8 days in transit.

    Nice and strongpacking.

    UPS, USPS,fedExcomes to be ourfirst choice.

    Return

    This item is backed by our 1-year warranty.

    Refund will be given as money back or replacement

    Item must be returned in original pacakge and packing the same as received.

    Seller isresponsible for the return if delivered item not the same as described orreceived are responsible for the return shipping cost if the problem ids caused by buyer.

    We only warranty cost of parts, any installation or other fees are non-refundable.

    About Us

    If you have a question about the itemyou should contact us before offerding.

    Any problem fund, do contact us please, any question or problem will be replied within 24 hours (except the weekend and holiday).

    Our Customer Service Team is always online to answer.

    
    

    All rights reserved.

    
    
    
    

    ---