Check Out the UPR Catch Can Installation Instructions section on Fittings -UPRPatented Diffuser -UPRBraided Hose -UPRBillet Hose Ends -UPR1/4 Turn Drain Cock -
What is the problem with your PCV system ?
The Positive Crankcase Ventilation (PCV) system is used to recycle the gasses that leak or “blow-by” your engines piston rings and create
a positive pressure in the crankcase. By venting these gasses along with oil mist/vapor from the crankcase and route it back into the intake
manifold so it can be burned off.
This is a poor fix from automobile manufacturers because over time the excess oil vapor collects along the inside of the intake tract and forms
a “sludge”. This leads to a variety of issues including carbon build up, retarded timing, detonation, power loss and even engine failure.
UPR s fix for the PCV system used on many engines for reducing toxic gasses from being released into the atmosphere and eliminating positive
crankcase pressure / Blow-By.
What does a UPR Catch Can do?
UPR s Billet Catch Can / oil-air separator will condense and collect the oil vapor before it has any chance to reach the intake tract. As the gas
and oil vapor enters UPR s can they pass through a Chambered filtering system that cools the oil vapor and gives it something to adhere to.
Then the oil forms into droplets and collects in the bottom of the UPR Catch Can so that they can later be drained. This is where the additional
Chambered filtering system comes into play allowing only the clean air to pass through so it can eliminate unwanted blow-by.
All engines have blow by otherwise there would be no need for a PCV system on your engine. PCV = Positive Crankcase Valve, which eliminates
Positive Crankcase Pressure. UPR s Catch Can have become one of the most widely used and recommended cures for just about every application.
The engine size and horsepower level is not relevant to the performance of the UPR Catch Can. UPR s Catch Can have become a cornerstone
by improving the Performance and Economy on any vehicle you install it on.
Item Policies
Returns are only accepted within 30days and only if a Return Merchandise Authorization (RMA) has been issued.
All returns MUST be brand new and intheir original, unopened packaging. (Item returns may be subjectto restocking fees)When shipping the item back to us, be sure torepack the items in an over-box (Original package inside another, larger box)to prevent shipping damage and preserve the original packaging. Originalpackaging is only meant to protect the products for the one trip shipment tothe customer. We are not liable for lost or damaged packages.
UPR Products reserves the right torefuse any package returned to us without authorization. Returns/Refunds areprocessed within (30) business days of receipt (not including holidays,weekends, transit time, or the day the package was delivered.)
Special order items, item hardware,rebuild kits. replacement parts, emblems,or decals cannot be returned.
If a free shipping item isreturned, the original outbound shipping will be deducted from the refund. Thecustomer is also responsible for return shipping.
If a customer refuses or is unavailable for an item, they will be charged the return shipping fee by thecarrier. If a free shipping item is refused or missed, the outbound shippingwill also be deducted from the refund.
If a customer changes an address orenters an incorrect address when placing an order, the customer is responsiblefor any address change/correction fees billed by the carrier andthe original outbound shipping fee on all free items. (We do not redirectpackages to addresses other than the billing address originally entered.
