Vehicle Fitment Information For 2005-06 Pontiac Pursuit Front Strut w/ Coil Spring Sway Bar Tierod Ends
Vehicle Fitment Information
Make Model YearRange SpecificDetails Chevrolet Cobalt 2005-2010 N/AModelsOnly SwayBar11.80"CenterToCenter Chevrolet HHR 2006-2011 N/AModelsOnly SwayBar11.80"CenterToCenter Pontiac G5 2007-2008 N/AModelsOnly SwayBar11.80"CenterToCenter Pontiac Pursuit 2005-2006 N/AModelsOnly SwayBar11.80"CenterToCenter
Package Includes
2x New Complete Quick Install Ready Struts - 172179L 172179R
2x Front Inner Tie Rod Ends- EV80445
2x Front Outer Tie Rod- ES800030
2x Front Sway Bar End Links "11.8 Inch Center to Center EndLinks ONLY"- K80252
Item Specifics
Complete Strut Assemblies
- Direct Fit - Ready to Install - No Special Tools Required!
- Each Complete Strut Assembly is designed and tuned for vehicle specific applications
- Complete Strut Assembly includes strut, coil spring (when applicable), strut mount, boot, bumper kit, spring seat, and isolator
- Tough, gloss black, powder coated with neoprene dust boot
- Each Strut is nitrogen gas charged
- Quick and easy - remove and replace the complete Strut Assembly in one piece. Do the complete job with the right auto part the first time. Enhances overall handling, safety, and performance of your vehicle.
Suspension Kit
- Precision-machined, advanced technology, low-friction polymer upper bearing provides smoother, easier steering, improved return-to-center, and eliminates endplay
- Powdered metal lower bearings for improved assembly strength
- Anti-corrosive coating provides protection from the harshest driving conditions
- Heat-treated, precision finished, ball ends for consistent torque and smooth operation throughout the entire range of driving
- Case-hardened, full-ball type stud offers tighter overall fit and improved stability
- Manufactured to meet or exceed expectations on performance and fit?
?
* Recommended replacement cycle
Since the average annual distance of the car is20,000 kilometers, and the shock absorber needs to be replaced in pairs, the replacement frequency is obtainedevery 4 years. In fact, the replacement frequency will vary depending on the car condition, road condition and shock absorber manufacturer.
(1).Do I need to replace the control arm if the bushings are worn?
Because the weight of the car is transferred through the control arm two rubber bushings are fitted at the pivot point and bolted to the frame. Road conditions and driving habits can contribute to the wear of these bushings which will become worn and fall apart. These bushing can be inspected by raising the car up and looking for an irregular configuration of the rubber center of the bushing. Many control arms have the ball joint manufactured into the arm which will be replaced along with the control arm itself. When one control arm is worn it is highly advised to replace the opposing arm.
(2).What happens if a ball joint breaks?
When a ball joint breaks, you will hear a mysterious noise inside your car wheel.
Your car tire will wear-out since your alignment will be broken, and you will feel the car getting out of control.
If the ball joint breaks completely, it can be separated, and things can turn sour quickly. The wheel will stop being nice and can even steer you off the road. It can be serious.
Broken ball joints will seriously affect the steering and suspension. It can even result in your wheel falling off the car.
(3).What happens if I don't replace ball joints?
If you don't want to replace your ball joints, then get ready to experience some serious issues. The old ball joints cause mysterious clunking noise or drifting steering. Once they are worn-out, it will seriously affect your steering and suspension. However, you do not need to change the ball joints if it is new.
(4).Do Ineed to grease new ball joints?
I would say it will be a wise decision if you grease your new ball joints. At least I will always grease a new one after the installation. Greasing a new ball joint will make it stronger and extend its lifetime because there is a minimal amount of grease inside. I suggest you do so after the first installation. Follow the instruction card.
(5).Can I Drive With a Broken Strut?
A strut is a suspension component that dampens an automobile's movements and prevents it from bouncing on its springs. Struts are often expensive to replace, but driving on a broken strut is not a good idea.
(6).Can worn shocks or struts cause my new tires to wear unevenly?
Absolutely: shocks and struts provide damping force to control tire movement. When the tires move excessively, they develop a “cupping” wear pattern that damages the tire.
Other factors such as incorrect air pressure, worn suspension components or improperly aligned steering also causes uneven tire wear.
(7).What are the benefits after replacing the shock absorber?
Buffer conveys shock to drivers and passengers in order to improve ride comfort and reduce fatigue.
Extend body life, prevent spring damage and improve braking effect.
Suppressing the rapid vibration of the wheels while driving, preventing the tires from leaving the road surface and improving the driving stability.
Improving driving stability and adjustability, effectively conveying engine deflagration pressure to the ground, so as to save fuel costs.
Item SpecificsBrand findautoManufacturer Part Number FA82016801TManufacturer Warranty 1 YearFitment Type Direct ReplacementPlacement on Vehicle Front Left RightAdjustable NoCustom Bundle YesBundle Description Complete Struts ,Stabilizer ,Tie RodSurface Finish Polished, Rust ProtectedFitment Type Direct ReplacementOE Spec or Performance/Custom OE SpecPart Type Strut & Coil Spring Assembly ,Tie Rod End KitGreasable or Sealed SealedModified Item NoGas Charged Shock YesCompression Range (in.) 11.020Extended Length (in.) 17.600Interchange Part Number 172179L,172179ROther Part Number EV80445,ES800030,K80252Express Split shipment
Payment Please do not use the PayPal note field to indicate us to ship to other address. The note there will NOT be read. If you want to change the shipping address, please contact us by messages.Shipping 1. Orders processed within 24 hours of payment verification.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)2. Fast shipping:All our packages use USPS First Class/UPS/Fedex... Package Service3.We do not offer local pickups.4. If you have not received your shipment within 15 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!Returns 1. You have 30 days to contact us and 10 days to return it from the date it was received. If this item is in your possession more than 7 days, it is considered used and we will not issue you a refund or replacement. There are NO EXCEPTIONS!2. All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable.3. We will refund your full winning offer amount, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER both Buyer and Seller cancel the transaction from . OR, you may choose to have a replacement.4. Return shipping is to be paid by the Buyer.
response
We maintain high standards of excellence (five stars review)and strive for 100% customer satisfaction! response IS VERY IMPORTANT TO US. We request that you contact us immediately BEFORE you give us neutral or negative response, so that we can satisfactorily address your concerns.
For 2005-06 Pontiac Pursuit Front Strut w/ Coil Spring Sway Bar Tierod Ends
Vehicle Fitment Information
Make Model YearRange SpecificDetails Chevrolet Cobalt 2005-2010 N/AModelsOnly SwayBar11.80"CenterToCenter Chevrolet HHR 2006-2011 N/AModelsOnly SwayBar11.80"CenterToCenter Pontiac G5 2007-2008 N/AModelsOnly SwayBar11.80"CenterToCenter Pontiac Pursuit 2005-2006 N/AModelsOnly SwayBar11.80"CenterToCenter
Package Includes
2x New Complete Quick Install Ready Struts - 172179L 172179R
2x Front Inner Tie Rod Ends- EV80445
2x Front Outer Tie Rod- ES800030
2x Front Sway Bar End Links "11.8 Inch Center to Center EndLinks ONLY"- K80252
Item Specifics
Complete Strut Assemblies
- Direct Fit - Ready to Install - No Special Tools Required!
- Each Complete Strut Assembly is designed and tuned for vehicle specific applications
- Complete Strut Assembly includes strut, coil spring (when applicable), strut mount, boot, bumper kit, spring seat, and isolator
- Tough, gloss black, powder coated with neoprene dust boot
- Each Strut is nitrogen gas charged
- Quick and easy - remove and replace the complete Strut Assembly in one piece. Do the complete job with the right auto part the first time. Enhances overall handling, safety, and performance of your vehicle.
Suspension Kit
- Precision-machined, advanced technology, low-friction polymer upper bearing provides smoother, easier steering, improved return-to-center, and eliminates endplay
- Powdered metal lower bearings for improved assembly strength
- Anti-corrosive coating provides protection from the harshest driving conditions
- Heat-treated, precision finished, ball ends for consistent torque and smooth operation throughout the entire range of driving
- Case-hardened, full-ball type stud offers tighter overall fit and improved stability
- Manufactured to meet or exceed expectations on performance and fit?
?
* Recommended replacement cycle
Since the average annual distance of the car is20,000 kilometers, and the shock absorber needs to be replaced in pairs, the replacement frequency is obtainedevery 4 years. In fact, the replacement frequency will vary depending on the car condition, road condition and shock absorber manufacturer.
(1).Do I need to replace the control arm if the bushings are worn?
Because the weight of the car is transferred through the control arm two rubber bushings are fitted at the pivot point and bolted to the frame. Road conditions and driving habits can contribute to the wear of these bushings which will become worn and fall apart. These bushing can be inspected by raising the car up and looking for an irregular configuration of the rubber center of the bushing. Many control arms have the ball joint manufactured into the arm which will be replaced along with the control arm itself. When one control arm is worn it is highly advised to replace the opposing arm.
(2).What happens if a ball joint breaks?
When a ball joint breaks, you will hear a mysterious noise inside your car wheel.
Your car tire will wear-out since your alignment will be broken, and you will feel the car getting out of control.
If the ball joint breaks completely, it can be separated, and things can turn sour quickly. The wheel will stop being nice and can even steer you off the road. It can be serious.
Broken ball joints will seriously affect the steering and suspension. It can even result in your wheel falling off the car.
(3).What happens if I don't replace ball joints?
If you don't want to replace your ball joints, then get ready to experience some serious issues. The old ball joints cause mysterious clunking noise or drifting steering. Once they are worn-out, it will seriously affect your steering and suspension. However, you do not need to change the ball joints if it is new.
(4).Do Ineed to grease new ball joints?
I would say it will be a wise decision if you grease your new ball joints. At least I will always grease a new one after the installation. Greasing a new ball joint will make it stronger and extend its lifetime because there is a minimal amount of grease inside. I suggest you do so after the first installation. Follow the instruction card.
(5).Can I Drive With a Broken Strut?
A strut is a suspension component that dampens an automobile's movements and prevents it from bouncing on its springs. Struts are often expensive to replace, but driving on a broken strut is not a good idea.
(6).Can worn shocks or struts cause my new tires to wear unevenly?
Absolutely: shocks and struts provide damping force to control tire movement. When the tires move excessively, they develop a “cupping” wear pattern that damages the tire.
Other factors such as incorrect air pressure, worn suspension components or improperly aligned steering also causes uneven tire wear.
(7).What are the benefits after replacing the shock absorber?
Buffer conveys shock to drivers and passengers in order to improve ride comfort and reduce fatigue.
Extend body life, prevent spring damage and improve braking effect.
Suppressing the rapid vibration of the wheels while driving, preventing the tires from leaving the road surface and improving the driving stability.
Improving driving stability and adjustability, effectively conveying engine deflagration pressure to the ground, so as to save fuel costs.
Payment Please do not use the PayPal note field to indicate us to ship to other address. The note there will NOT be read. If you want to change the shipping address, please contact us by messages. Shipping 1. Orders processed within 24 hours of payment verification.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)2. Fast shipping:All our packages use USPS First Class/UPS/Fedex... Package Service3.We do not offer local pickups.4. If you have not received your shipment within 15 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction! Returns 1. You have 30 days to contact us and 10 days to return it from the date it was received. If this item is in your possession more than 7 days, it is considered used and we will not issue you a refund or replacement. There are NO EXCEPTIONS!2. All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable.3. We will refund your full winning offer amount, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER both Buyer and Seller cancel the transaction from . OR, you may choose to have a replacement.4. Return shipping is to be paid by the Buyer.
response
We maintain high standards of excellence (five stars review)and strive for 100% customer satisfaction! response IS VERY IMPORTANT TO US. We request that you contact us immediately BEFORE you give us neutral or negative response, so that we can satisfactorily address your concerns.
All rights reserved.