Features:
1. FITMENT :
For 1999-2014 Chevy Silverado and Sierra 1500 2500 2WD/4WD.
For Standard Cab 2/4WD Silverado/Sierra 1500 with Oval Upper Mounts.
2. FUNCTION: Used to attach a body and frame, provide necessary rigidity, yet have ample resilience to keep everything quiet.
They outlast factory body mounts and provide a firm connection between the body and frame.
3. NICE DESIGN: Holds super grease for quiet operation, reducing equipment wear, vibration and noise. Yoursme body mounts
are the perfect upgrade for mushy and worn out stock rubber body mount bushings and are particularly beneficial in racing
applications.
4. PREMIUM MATERIAL: Made from premium grade polyurethane, which is anti corrosion and resistant to vehicle fluids and
road grime. Outperform even new OE rubber bushings and last much longer without deteriorate.
Package including:
8 × UPR Body Mount Bushings
8 × LWR Body Mount Bushings
8 × Flat Washers
Installation Instruction:
1. Spray all mounting bolts and nuts to be removed with penetrating oil.
2. Place the vehicle body properly before removing mounts. (It is recommended that using a 2" x 4" piece of wood 24" long or any
other suitable size wood between the jack and body panel to distribute the load, preventing any damage of the body panels.) If
necessary, support the body in multiple areas.
3. Loosen all nuts and bolts but DON’T remove them. Work from one side of the vehicle at a time. Remove the nuts and bolts from
one mount location and raise the body enough to replace the mount, NEVER HIGHTER. When raising the body, carefully check the
interference problems in other parts.
4. Take one mount at a time with similar size urethane mounts. If washers/sleeves have been provided, use the original parts for installation.
5. After replacing all mounts, tighten all nuts and bolts to factory standards.
(ATTENTION PLEASE: Re-tighten all nuts and bolts after initial installation of mounts (approximately 1000 miles of
driving) to ensure that all parts are not becoming loose.)
