Front Drive Axle Actuator 84630666 For Chevrolet Colorado GMC Canyon 2015-2022 For Sale - New and Used

CADILLAC

ESCALADE 2015-2020 6.2L V8

ESCALADE ESV 2015-2020 6.2L V8

CHEVROLET

SILVERADO 1500 2014-2019 4.3L V6

SILVERADO 1500 2014-2019 5.3L V8

SILVERADO 1500 2014-2019 6.2L V8

SILVERADO 2500 2015-2019 6.0L V8

SILVERADO 2500 2015-2019 6.6L V8 DIESEL Turbo

SILVERADO 3500 2015-2019 6.0L V8

SILVERADO 3500 2015-2019 6.6L V8 DIESEL Turbo

SUBURBAN 2015-2020 5.3L V8

SUBURBAN 2016-2018 6.0L V8

SUBURBAN 2019-2020 6.2L V8

TAHOE 2015-2020 5.3L V8

TAHOE 2018-2020 6.2L V8

GMC

SIERRA 1500 2014-2018 4.3L V6

SIERRA 1500 2014-2018 5.3L V8

SIERRA 1500 2014-2018 6.2L V8

SIERRA 1500 LIMITED 2019 5.3L V8

SIERRA 2500 2015-2019 6.0L V8

SIERRA 2500 2015-2019 6.6L V8 DIESEL Turbo

SIERRA 3500 2015-2019 6.0L V8

SIERRA 3500 2015-2019 6.6L V8 DIESEL Turbo

YUKON 2015-2020 5.3L V8

YUKON 2015-2020 6.2L V8

YUKON XL 2015-2020 5.3L V8

YUKON XL 2015-2020 6.2L V8

FEATURES

Fix the check engine light issue, provide extreme durability for long life, improves fuel economy and lowers new aftermarket product, 100% tested before on sale and close to original check it clearly and confirm it suits to your item will be sent out ASAP after cleared payment.

-The item sent from China (sent out in 1-5 business days)

-The item sent from US through USPS (sent out in 1-3 business days)

▼Accurate contact informartion is of importace to delivery, please make sure it is correct.

▼Import duties, taxes and fees are not included in the price of the item or in the freight, and these costs are the responsibility of the buyer.

RETURN

▼If you receive the items that is any problems or damaged, please send us some pictures to check it, and then we will send you a replacement or refund.

▼Returned parts must be returned in the original package in which they came in.

• Oxygen Senosor
• Mass Air Flow Meter Sensor
• Ignition Coil
• Nox Sensor
• Fuel Injector
• Parking Camera
• Pressure Sensor
• Power Window Switch
• Crankshaft Position Sensor
• Temperature Sensor

• Installation instructions for injectors

  • First, disconnect the plug from the injector. Then disconnect the vacuum hose and fuel return hose from the fuel pressure regulator, and then disconnect the fuel hose from the manifold.
  • Remove the retaining nuts on the distributor and harness rack.
  • Remove the distributor and then remove the injector from the distributor
  • First, insert the injector into the distributor. Then care should be taken to apply a clean layer of oil to the new sealing ring, and then push the injectors into the intake manifold. (Pay attention to the damage to the 0 ring, and the injector should be installed first on the manifold and then on the intake manifold.)
  • Replace the fuel hose with a new washer and connect it to the manifold, then connect the connector to the injector and wiring harness and connect the vacuum hose and return line to the fuel pressure regulator. And then install the intake manifold and the intake manifold cover.

  Installation steps for lambda sensors:

  • Diagnostic trouble codes to identify the faulty sensor Test the zero state with the multimeter and select multiple points to measure the signal output.
  • Disconnect the oxygen sensor, remove the oxygen sensor Remove the cover, slowly unscrew the oxygen sensor plug before opening the triangular iron to see your own oxygen sensor.
  • Compare the lambda sensor The problem can be detected by comparing the removed sensor with the newly purchased lambda sensor.
  • Install the new sensor and connect the wiring harness Install the new oxygen sensor according to the position of the original oxygen sensor, screw the plug to the joint.Clear the codes and start the vehicle After the installation is complete, start the vehicle and check if it is running normally.

  How are the ignition coils mounted correctly?

  • If the ignition coils are not used properly, they can easily be damaged. Therefore, customers should consider the following tips when using ignition coils:
  • Turn off the ignition coils when the engine is not in operation. Avoid exposing the ignition coils to a heated or humid environment.
  • Spark plugs should not be hung for a long time and replaced regularly.
  • Control the power of the motor correctly to avoid overvoltage.
  • Check, clean and attach the circuit connector regularly to avoid a short-circuit phenomenon. The water on the ignition coil can only be dried with a cloth and must not be roasted with fire, otherwise the ignition coils will be the problem with the check engine code/light, ensure extreme durability for long life, improve fuel economy and reduce emissions

    CONDITION

    Brand new aftermarket product, 100% tested before sale and close to original effect

    ATTENTION

    Please check it clearly and confirm that it meets your contact information is important for delivery, please make sure it is correct.

  • Import duties, taxes and fees are not included in the price of the item or freight, and these costs are the responsibility of the buyer.

  RETURN

  • If you receive the items that are problems or damaged, please send us some pictures to check them and then we will send you a replacement or refund.
  • Returned parts must be returned in the original packaging in which they were delivered.
  
  

  ---