Repair kit. Suitable for Bosch 8-cylinder gray cast iron flow divider with the part number:
0438100012
Depending on the respective model, individual sealing rings included are not required.
Spring stainless steel membrane made in Germany. All sealing rings made from FPM/FFPM/FKM for maximum chemical resistance and service life.
In addition to the stainless steel membrane and Allen sealing rings and copper sealing rings, the following parts are also included: Copper sealing rings (Made in Germany) for mounting the injection lines and screw-in connectors, adjusting washers for the various system pressure regulator types, housing screws, mounting screws for mounting on the air flow meter, a dismantling screw for removing the plug-in gasoline filters in the injection ports, three dismantling screws for opening the Housing halves and citric acid granules for cleaning all fine filters.
The instructions are so detailed that repairs are possible even for laypeople! The instructions will be sent to you as a PDF via email.
If there are any questions or ambiguities during installation, adjustment or calibration, we will be happy to help by telephone or email.
Repair kit. Suitable for Bosch 8-Cylinder Cast Iron Fuel Distributors with the Bosch part number:
0438100012
Depending on your model, some included parts may not be needed.
Stainless-spring-steel-membrane from German production, all sealing rings made from expensive FPM/FKM: The sealing rings in other repair kits are often made from NBR or even silicon. These O-rings do not resist modern super-fuel for more than a few years before they become leaky.
Besides the membrane and all sealing-rings and copper washers the following parts are as well included:
New copper washers (made in Germany) for mounting the injection-fuel-lines and all thread-in-fittings, shims for adjusting the different types of system-pressure-regulators, housing-screws, mounting screws for mounting the Fuel Distributor to the airflow , a disassembly-screw for removing the small injection-line-fuel-filters, three disassembly-screws for opening the housing halves and citric acid granulate for cleaning all fine fuel filters.
Delivery with a very very detailed step-by-step repair instruction (in English), illustrated with more then 70 pictures! The repair instruction is so detailed that a repair can be done by a layman! The instruction will be sent to you via email as a PDF file.
If you need help or have further questions during assembly, we can also advise you by phone or email.
In addition to the stainless steel membrane and Allen sealing rings and copper sealing rings, the following parts are also included: Copper sealing rings (Made in Germany) for mounting the injection lines and screw-in connectors, adjusting washers for the various system pressure regulator types, housing screws, mounting screws for mounting on the air flow meter, a dismantling screw for removing the plug-in gasoline filters in the injection ports, three dismantling screws for opening the Housing halves and citric acid granules for cleaning all fine filters. New copper washers (made in Germany) for mounting the injection-fuel-lines and all thread-in-fittings, shims for adjusting the different types of system-pressure-regulators, housing-screws, mounting screws for mounting the Fuel Distribut
