Compatible FCC ID#(s):
Alternate Spellings
FCC ID ELVATJB
Part #(s)
101BP
Dealer #(s)
Button Count:
1 button; Car Starter
Battery (installed):
1; CR2032
Frequency:
433-434 MHz
LED Light Color:
Red
Circuit board #s:
Replacement remote for
Prestigemodel:APS901C
Condition Notes:
Pre-Owned
Compatible Aftermarket Installed Systems:
APS900
APS901
APS901C
APS901N
AS9055C
AS9055T
AS9233ST
JKRS1
JKRS1T
PRO9051N
CA421
CA420A
CA420
CA440TW
CA440SS
Programming: Please note not all customers will be able to complete the programming on their own so if you are having trouble or unsure diagnostic programming is available at your local qualified automotive locksmith or car/audio shop.
This remote needs to be programmed to your vehicle in order for it to work with your vehicle’s installed RKE (remote keyless entry ) system: Programming Instructions:
This transmitter is designed for use with your upgrade remote start unit and is programmed by using the remote start's program switch in combination with the transmitter button. Although this transmitter can be programmed into any of the Audiovox remote start and/or alarm, remote start systems, it will offer limited use and should be used for the remote start upgrade only.
To program this transmitter into your remote start upgrade unit:
- Turn the ignition to the on position.
- Press and release the programming switch 3 times.
- Press and hold, for 3 seconds, the button of the transmitter you wish to add until the parking light flashes, indicating the transmitter has been learned.
- Repeat step 3 for each transmitter up to a total of 4 transmitters.
- Turn the ignition off to exit the program mode.
NOTE: Do not allow more than 15 seconds to lapse between steps or the program mode will automatically exit and you will have to start over.
& year = we can pass on to you any programminginformation requirements we have on hand.
