New Pro Car Headlight Lens Restoration Kit Headlight Cleaner Polishing Tool USA For Sale - New and Used

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

New Pro Car Headlight Lens Restoration Kit Headlight Cleaner Polishing Tool USA:
$6.82

Store CategoriesStore Categories

Two ways for choose: Manual or Machine. Machine polishing will generally yield better results.

Features and Advantages:

1. Designed to restore clarity to headlight lenses that have become yellowed, cloudy, or hazy.2. Headlight lens restoration kit improves the performance of the headlight.3. Three easy steps: sand, polish and protect.4. Easier than replacing an old headlight5. Comes with easy-to-use instructions.6. Car headlight, restoration kit does not include household polishing machine.7. Restores headlights, taillights, fog lights or directional lights.8. This kit is intended to restore 2 headlights.

Packing List:

2x P800 Sanding Discs2x P1200 Sanding Discs2x P2000 Sanding Discs1x Orange Sponge Disc2x 28.3ml Polish Paste2x 3.0ml Protect Liquid1x Tape (300x2cm)1x Backer Pad M10 Thread1x Adaptor 1x Sponge Disc WhiteHow to Operate:

Prepare:Clean the headlight lens with water. Mask off the surrounding perimeter of the lens to avoid scratching the paint of the vehicle.

Step1. Sand

Wet the sanding disc and attach it to the backer pad. Sand with three different grits to completely remove the heavy yellowing, fading, and corrosion.

Note: Use the sanding discs from coarse to fine: P800--> P1200--P2000. Not doing so will result in restoration failure

Step2. Polish

Attach. the orange sponge disc to the backer pad and apply the polish paste. Polish the lens until the shine is restored to its original condition.

Note: For best results, use an electric buffer or polisher. If polishing by hand, polish with no less than 200 strokes in a circular, clockwise motion.

Step3.UV Protection Liquid (Important)

Clean the headlight lens and make sure the lens is dry before the protection step. Use the white sponge disc provided in the kit.Evenly apply the protect liquid on the surface of the lens. After apply it, stay for 10-15mins to let the liquid flow evenly itself. Then dry it direct sunlight immediately (1 to 2 hours is suggested).if not, dust and other dirt will adhere to protect liquid due to its viscosity, which will affect the brightness of the headlight.

Note: Please must avoid any sunlight when apply the protect liquid on headlight (very important). After step 3, keep the lens dry. Do not wash the car for 24 hours

Step4. About removing the Masking Tape

After finishing all the steps, please remove the mask tape, otherwise the longer the time, the harder it is to remove and may leave traces

Please leave Positive response and 5 Star Ratings for us if you are satisfied with our products and service, and we will do the same for you !Your satisfaction is our highest priority.Please contact us if you have any questions or requests about our products or service.We are always glad to assist you and stand by our products.