Genuine Mopar OEM ABS Control ModuleAnti-Lock Brake System Module | EBCM | Brake Control Module
Genuine Mopar OEM ABS / Anti-Lock Brake System Control Module, Part Number.
This Electronic Brake Control Module (EBCM) is designed for select Dodge Caliber, Jeep Compass and Jeep Patriot vehicles equipped with the compatible factory ABS system.
The ABS control module monitors wheel-speed information and electronically manages the Anti-Lock Brake System. It communicates with the vehicle's braking and stability-control systems to help maintain proper braking performance and prevent wheel lock-up during hard or slippery braking conditions.
Please compare your original part number and provide your VIN before installation to confirm compatibility.
FITMENTDodge Caliber — 2011–2012
Compatible applications include:
- 2011 Dodge Caliber
- 2012 Dodge Caliber
Engine applications:
- 2.0L 4-Cylinder Gas
- 2.4L 4-Cylinder Gas
Applicable trims may include:
- Express
- Heat
- Mainstreet
- Rush
- SE
- SXT
- SXT Plus
- Uptown
- R/T FWD
Mopar catalog information lists 68089567AC for 2011–2012 Dodge Caliber applications with 2.0L and 2.4L engines.
Jeep Compass — 2011–2013
Compatible applications include:
- 2011 Jeep Compass
- 2012 Jeep Compass
- 2013 Jeep Compass
Engine applications:
- 2.0L 4-Cylinder Gas
- 2.4L 4-Cylinder Gas
Depending on year and configuration, applications include:
- Base
- Latitude
- Limited
- Sport
- FWD
- 4WD
Mopar fitment data lists 68089567AC for 2011–2013 Jeep Compass applications with 2.0L and 2.4L engines.
Jeep Patriot — 2011–2013
Compatible applications include:
- 2011 Jeep Patriot
- 2012 Jeep Patriot
- 2013 Jeep Patriot
Engine applications:
- 2.0L 4-Cylinder Gas
- 2.4L 4-Cylinder Gas
Depending on year and configuration, applications include:
- Latitude
- Latitude X
- Limited
- Sport
- FWD
- 4WD
Mopar catalog data confirms 68089567AC for 2011–2013 Jeep Patriot applications with 2.0L and 2.4L engines.
ENGINE APPLICATIONS
This ABS module is associated with:
2.0L 4-Cylinder
- 2.0L I4 Gas
- 2.0L 4-Cylinder Gas
- 2.0L DOHC
2.4L 4-Cylinder
- 2.4L I4 Gas
- 2.4L 4-Cylinder Gas
- 2.4L DOHC
Engine size alone does not guarantee compatibility. Always verify the original ABS module number and VIN.
OEM PART NUMBERMain Part Number
68089567AA68089567ABThese replacement relationships are listed in Mopar parts catalog data.
Important: Other ABS module numbers may look similar but can have different software, configuration or vehicle applications. Do not substitute another number without confirming compatibility.
COMMON SYMPTOMS OF A FAILED ABS MODULE
A defective ABS control module may cause:
- ABS warning light
- Traction Control warning light
- ESP / stability-control warning
- Service ABS message
- ABS diagnostic trouble codes
- Communication errors
- Loss of ABS functionality
- Intermittent ABS operation
- Multiple wheel-speed-related faults
- ABS module communication failure
- Scan tool unable to communicate with the ABS module
Important: These symptoms can also be caused by wheel-speed sensors, wiring, connectors, power/ground problems or other ABS components. Proper diagnosis should be performed before replacing the ABS module.
WHY CAN AN ABS MODULE FAIL?
ABS electronic modules operate in a demanding automotive environment and can develop problems over time.
Possible causes include:
- Internal electronic component failure
- Circuit-board failure
- Electrical faults
- Corrosion or moisture
- Connector problems
- Power or ground issues
- Communication/network faults
- Age-related electronic failure
- Internal module communication failure
A proper diagnostic procedure should be performed before replacing the module.
PROGRAMMING / INITIALIZATIONIMPORTANT
Depending on the vehicle and module configuration, programming, initialization, configuration or calibration may be required after installation.
The replacement module may need to communicate correctly with the vehicle's other control modules before the ABS system operates normally.
Professional diagnostic equipment may be required.
If you do not have the appropriate diagnostic equipment, we recommend installation and setup by a qualified automotive technician or dealership.
VIN VERIFICATIONVIN REQUIRED BEFORE SHIPPING
Please provide your 17-digit VIN after purchase.
We recommend verifying:
- VIN
- Original ABS module part number
- Vehicle year
- Make
- Model
- Engine
- Drivetrain
- ABS configuration
- Connector configuration
Do not rely on year/make/model alone.
Different ABS modules can be used on similar vehicles, so matching the original part number is especially important.
CONDITION
Genuine Mopar OEM / Professionally Remanufactured
This listing is for the ABS control module shown in the photos.
The unit has been professionally restored and tested for electronic functionality.
Please carefully compare the part number, connectors and physical appearance of your original module with the photos before ordering.
WHAT IS INCLUDED?
Included:
- 1 × ABS / Anti-Lock Brake System Control Module
- Mopar Part Number 68089567AC
- Installation KIT
Please review all listing photos for the exact item and components included.
IMPORTANT FITMENT NOTE
This part is intended for specific 2011–2013 Jeep Compass, 2011–2013 Jeep Patriot and 2011–2012 Dodge Caliber applications.
It does NOT fit every vehicle from these model years.
Some vehicles use different ABS modules depending on equipment and brake-system configuration.
VIN verification is strongly recommended before shipping.
VEHICLE APPLICATION / 2.4L2012DodgeCaliber2.0L / 2.4L2011JeepCompass2.0L / 2.4L2012JeepCompass2.0L / 2.4L2013JeepCompass2.0L / 2.4L2011JeepPatriot2.0L / 2.4L2012JeepPatriot2.0L / 2.4L2013JeepPatriot2.0L / 2.4L
ABS Control Module, ABS Module, EBCM, Electronic Brake Control Module, Anti-Lock Brake Module, Anti-Lock Brake System Module, Brake Control Module, ABS ECU, ABS Computer, Traction Control Module, Mopar ABS Module, Dodge ABS Module, Jeep ABS Module, Dodge Caliber ABS, Caliber EBCM, Jeep Compass ABS, Compass EBCM, Jeep Patriot ABS, Patriot EBCM, 68089567AC, 68089567AB, 68089567AA.
