TransGo Shift Kit GM 4L60E Includes .500" Boost Valve (4L60E-HD2)1993-up
Upgrade the performance, durability, and shift quality of your GM automatic transmission with the TransGo 4L60E-HD2 Reprogramming Kit. Designed for 1993-2015 GM 4L60E, 4L65E, 4L70E, and 4L75E automatic transmissions (excluding Hybrid models), this comprehensive valve body rebuild kit corrects many of the most common transmission complaints while delivering crisp, positive shifts and improved clutch durability.
This kit can be installed while the transmission is in the vehicle on 1993-2006 models only without the input speed sensor. 2007 and later models equipped with the input speed sensor require transmission removal.
This also includes #7-CS 3-4 clutch piston return spring kit for the input drum which reduces centrifugal 3-4 clutch apply and failure in 1st gear at 5500 RPM or higher, transmission removal required.
Features
- Genuine TransGo 4L60E-HD2 Reprogramming Kit
- Fits GM 4L60E, 4L65E, 4L70E & 4L75E Automatic Transmissions
- Fits 1993-2015 Applications (Except Hybrid Models)
Corrects Common Problems
- TCC slip or shudder
- Code P1870 and P0894
- Harsh 1-2 shift
- Long soft shifts
- Double bump or slide bump on the 1-2 shift
- 2-3 flare up
- 2-4 band failure
- Burnt 3-4 clutch plates
- Burnt forward and low/reverse clutch plates
- Pump slide and valve bore wear
Kit Includes
- Second servo piston spring, two shims and two O-rings
- (2) 1-2 accumulator springs, spring seat and three spacers
- 3-2 Downshift valve spring
- Actuator feed limit valve spring
- (2) 1-2 accumulator valve springs
- USA-made hardened steel 1-2 shift valve and spacer
- Low valve spring
- USA-made hardened TCC regulator and isolator valve, spring and installation bolt
- (2) Pressure regulator valve springs and spacer
- .500” boost valve, bushing and snap ring
- EPC screen wire spacer and oversized 1-2 checkball
- (2) Drill bits
- (2) Reverse input piston orifice cup plugs
- 3-4 accumulator spring
- (2) Valve body gaskets
- Pan gasket
- 3-4 clutch return springs and orifice capsule
- Forward clutch return springs and installation washer
Vehicle Compatibility
Fits GM vehicles equipped with:
- 4L60E Automatic Transmission
- 4L65E Automatic Transmission
- 4L70E Automatic Transmission
- 4L75E Automatic Transmission
Model Years:
Important Installation Notes:
- 1993-2006: Kit can generally be installed with the transmission in the vehicle on models without an input speed sensor.
- 2007 and Later: Models equipped with an input speed sensor require transmission removal.
- Installation of the included 3-4 clutch return spring kit requires transmission removal.
- Professional installation is recommended.
Why Choose the TransGo HD2 Kit?
- Restores Proper Hydraulic Operation
- Improves Shift Performance
- Increases Transmission Durability
- Reduces Common Transmission Failures
- Trusted by Professional Transmission Rebuilders
Package Includes
- (1) TransGo 4L60E-HD2 Reprogramming Kit
Why Buy From Us?
- Fast Shipping
- Quality Transmission Parts
- Trusted U.S. Seller
- Professional Customer Support
- Transmission Specialists
Please verify your transmission model before purchasing. If you're unsure of compatibility, send us your VIN and we'll be happy to confirm fitment.
We welcome offers and all reasonable offers will be considered. When making an offer please consider product cost, shipping cost, and your location. This is especially important when making offers on smaller value items. We offer free shipping on most of our parts; therefore, if your offer does not even cover the delivery cost, it doesn’t make sense for us to accept it.
A good rule of thumb is to offer no more than 15-20% less than the listing price.
Important InformationShippingCore PolicyWarranty & Limitations ReturnsImportant InformationShippingCore PolicyWarranty & Limitations Returns
IMPORTANT PLEASE READ ALL BEFORE PURCHASING
As a buyer, it is your responsibility to verify that this part is compatible with your application.
We WILL NOT pay for return shipping for parts ordered in error. If you order the incorrect part and start a return selecting the reason to be anything otherwise, you will be reported to in order to recoup shipping fees.
All Ford branded parts are genuine Ford OEM part. We purchase directly from Ford Components in bulk, which means the parts may not come in traditional dealer-branded packaging. Additionally, part numbers are removed (dremeled off) per our pricing agreement with Ford Components to ensure any returns are processed through us and not a dealership. Rest assured, the quality and fitment are identical to what you’d receive from a order will be shipped within 1 business days (MON-FRI excluding holidays) of receiving payment and you should expect to receive it five to seven days via US Postal Service or UPS Ground Standard Shipping unless another shipping method is chosen. In addition to UPS Ground, we offer expedited services as well as local pick-up. Please contact us if a quote is needed and we will be happy to work with you.
Please Note: All packages valued at over $500 WILL require a signature upon delivery.
If your package arrives damaged, please do not open it and contact us immediately. If you install damaged parts they will not be returnable.
If your package is returned by the carrier due to address errors, you will be responsible for the shipping Customers:
Please make sure you monitor your package. Any import duty/taxes must be paid by the buyer. If you do not pay in a timely fashion your package will be returned. You will not receive a refund for the returned items until they’re delivered. Shipping fees will not be reimbursed. style="text-align:justify">CORE RETURN DIRECTIONS & GUIDELINES
Cores must returned within 30 days of the original purchase or any claim to warranty will be null/void.
Cores must exhibit normal wear and tear conditions.Cores must be drained of internal fluids.Cores should be wrapped in plastic when repacked for shipment. A garbage bag will suffice.Repack your core inside the box the replacement part was received in. It is extremely important that the core be returned inside its original box for identification purposes.Securely tape your package closed.PLEASE mark the outside of your box clearly and in large lettering with the words "CORE RETURN". This helps make sure that your package remains identified within the warehouse as a core.If the item you purchased has a refundable core charge, you, as the buyer are responsible for return shipping to receive core credit.
Whatever It Takes will not be liable for shipping damage due to being improperly boxed.
Whatever It Takes will not be liable for fees, such as taxes, duties, customs associated with international shipments, or lost shipments.
Please note that this core policy only applies to purchases made through an e-commerce platform.
Whatever It Takes Transmission Parts warrants this product to be free from defects in materials and workmanship at the time of sale when used under normal, intended operating conditions.
Not all products sold by Whatever It Takes Transmission Parts include a warranty. Any warranty coverage applies only to products that are explicitly identified as having a warranty at the time of purchase. The information below outlines the terms and limitations only if a warranty is provided with the specific product.
What’s Covered
- Manufacturing defects in materials or workmanship
- Failures under normal, intended use
If a defect is confirmed, liability is limited to replacement of the part or refund of the purchase price, at our Not Covered
- Normal wear and tear
- Improper installation or incorrect application
- Misuse, abuse, neglect, accidents, or modifications
- Damage from overheating, contamination, improper lubrication, or lack of maintenance
- Labor costs (installation, removal, diagnosis)
- Consequential or incidental damages (downtime, towing, loss of Notice
Professional installation is required. Failure to follow manufacturer and industry-standard installation procedures will void this warranty is limited to the product only and does not cover related components or vehicle damage. Maximum liability shall not exceed the original purchase price.30-day return policy for unused, uninstalled items. Any product you return must be in the same condition you received it and in the original packaging.
If you’re having an issue with a used or remanufactured item and it’s been installed, we require the buyer to contact us immediately so we can provide trouble shooting information. Worst case scenario if that fails, exchange only.
Certain item such as fluids, used items, tools, and one time use items are not eligible for return. As a buyer, it is your responsibility to verify that this product is compatible with your you ordered the wrong item for your application YOU are responsible for the return shipping.
20% Restocking Fee May Apply
A NAME YOU CAN TRUST
As an industry veteran in the transmission parts supply business, you can buy with confidence. Our goal is to provide high quality parts, an experienced sales force, and the highest levels of product availability possible.
Upgrade the performance, durability, and shift quality of your GM automatic transmission with the TransGo 4L60E-HD2 Reprogramming Kit. Designed for 1993-2015 GM 4L60E, 4L65E, 4L70E, and 4L75E automatic transmissions (excluding Hybrid models), this comprehensive valve body rebuild kit corrects many of the most common transmission complaints while delivering crisp, positive shifts and improved clutch durability.
This kit can be installed while the transmission is in the vehicle on 1993-2006 models only without the input speed sensor. 2007 and later models equipped with the input speed sensor require transmission removal.
This also includes #7-CS 3-4 clutch piston return spring kit for the input drum which reduces centrifugal 3-4 clutch apply and failure in 1st gear at 5500 RPM or higher, transmission removal required.
Features- Genuine TransGo 4L60E-HD2 Reprogramming Kit
- Fits GM 4L60E, 4L65E, 4L70E & 4L75E Automatic Transmissions
- Fits 1993-2015 Applications (Except Hybrid Models)
Corrects Common Problems- TCC slip or shudder
- Code P1870 and P0894
- Harsh 1-2 shift
- Long soft shifts
- Double bump or slide bump on the 1-2 shift
- 2-3 flare up
- 2-4 band failure
- Burnt 3-4 clutch plates
- Burnt forward and low/reverse clutch plates
- Pump slide and valve bore wear
Kit Includes- Second servo piston spring, two shims and two O-rings
- (2) 1-2 accumulator springs, spring seat and three spacers
- 3-2 Downshift valve spring
- Actuator feed limit valve spring
- (2) 1-2 accumulator valve springs
- USA-made hardened steel 1-2 shift valve and spacer
- Low valve spring
- USA-made hardened TCC regulator and isolator valve, spring and installation bolt
- (2) Pressure regulator valve springs and spacer
- .500” boost valve, bushing and snap ring
- EPC screen wire spacer and oversized 1-2 checkball
- (2) Drill bits
- (2) Reverse input piston orifice cup plugs
- 3-4 accumulator spring
- (2) Valve body gaskets
- Pan gasket
- 3-4 clutch return springs and orifice capsule
- Forward clutch return springs and installation washer
Vehicle CompatibilityFits GM vehicles equipped with:
- 4L60E Automatic Transmission
- 4L65E Automatic Transmission
- 4L70E Automatic Transmission
- 4L75E Automatic Transmission
Model Years:
Important Installation Notes:
- 1993-2006: Kit can generally be installed with the transmission in the vehicle on models without an input speed sensor.
- 2007 and Later: Models equipped with an input speed sensor require transmission removal.
- Installation of the included 3-4 clutch return spring kit requires transmission removal.
- Professional installation is recommended.
Why Choose the TransGo HD2 Kit?- Restores Proper Hydraulic Operation
- Improves Shift Performance
- Increases Transmission Durability
- Reduces Common Transmission Failures
- Trusted by Professional Transmission Rebuilders
Package Includes- (1) TransGo 4L60E-HD2 Reprogramming Kit
Why Buy From Us?- Fast Shipping
- Quality Transmission Parts
- Trusted U.S. Seller
- Professional Customer Support
- Transmission Specialists
Please verify your transmission model before purchasing. If you're unsure of compatibility, send us your VIN and we'll be happy to confirm fitment.
Upgrade the performance, durability, and shift quality of your GM automatic transmission with the TransGo 4L60E-HD2 Reprogramming Kit. Designed for 1993-2015 GM 4L60E, 4L65E, 4L70E, and 4L75E automatic transmissions (excluding Hybrid models), this comprehensive valve body rebuild kit corrects many of the most common transmission complaints while delivering crisp, positive shifts and improved clutch durability.
This kit can be installed while the transmission is in the vehicle on 1993-2006 models only without the input speed sensor. 2007 and later models equipped with the input speed sensor require transmission removal.
This also includes #7-CS 3-4 clutch piston return spring kit for the input drum which reduces centrifugal 3-4 clutch apply and failure in 1st gear at 5500 RPM or higher, transmission removal required.
Features- Genuine TransGo 4L60E-HD2 Reprogramming Kit
- Fits GM 4L60E, 4L65E, 4L70E & 4L75E Automatic Transmissions
- Fits 1993-2015 Applications (Except Hybrid Models)
Corrects Common Problems- TCC slip or shudder
- Code P1870 and P0894
- Harsh 1-2 shift
- Long soft shifts
- Double bump or slide bump on the 1-2 shift
- 2-3 flare up
- 2-4 band failure
- Burnt 3-4 clutch plates
- Burnt forward and low/reverse clutch plates
- Pump slide and valve bore wear
Kit Includes- Second servo piston spring, two shims and two O-rings
- (2) 1-2 accumulator springs, spring seat and three spacers
- 3-2 Downshift valve spring
- Actuator feed limit valve spring
- (2) 1-2 accumulator valve springs
- USA-made hardened steel 1-2 shift valve and spacer
- Low valve spring
- USA-made hardened TCC regulator and isolator valve, spring and installation bolt
- (2) Pressure regulator valve springs and spacer
- .500” boost valve, bushing and snap ring
- EPC screen wire spacer and oversized 1-2 checkball
- (2) Drill bits
- (2) Reverse input piston orifice cup plugs
- 3-4 accumulator spring
- (2) Valve body gaskets
- Pan gasket
- 3-4 clutch return springs and orifice capsule
- Forward clutch return springs and installation washer
Vehicle CompatibilityFits GM vehicles equipped with:
- 4L60E Automatic Transmission
- 4L65E Automatic Transmission
- 4L70E Automatic Transmission
- 4L75E Automatic Transmission
Model Years:
Important Installation Notes:
- 1993-2006: Kit can generally be installed with the transmission in the vehicle on models without an input speed sensor.
- 2007 and Later: Models equipped with an input speed sensor require transmission removal.
- Installation of the included 3-4 clutch return spring kit requires transmission removal.
- Professional installation is recommended.
Why Choose the TransGo HD2 Kit?- Restores Proper Hydraulic Operation
- Improves Shift Performance
- Increases Transmission Durability
- Reduces Common Transmission Failures
- Trusted by Professional Transmission Rebuilders
Package Includes- (1) TransGo 4L60E-HD2 Reprogramming Kit
Why Buy From Us?- Fast Shipping
- Quality Transmission Parts
- Trusted U.S. Seller
- Professional Customer Support
- Transmission Specialists
Please verify your transmission model before purchasing. If you're unsure of compatibility, send us your VIN and we'll be happy to confirm fitment.
