VALVE COVER SPACERS 1\" DODGE VIPER V10 For Sale - New and Used

$VALVE COVER SPACERS 1\$
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

VALVE COVER SPACERS 1\" DODGE VIPER V10:
$350.00

DODGE VIPER V10 VALVE COVER SPACERS1INCHTHICK6061 BILLET ALUMINUMWITHGASKETLOKFEATURE ON BOTOM SIDE SILICONE TO HEADUSE ORING ON VALVE COVER ON TOPSIDE OF SPACERSOLD IN SETS (TWO SPACERS).Made in the U.S.A. from 100% U.S.A. Billet Aluminum.Some Information about us.

We are a Manufacture of Billet Valve Cover Spacers and Adaptors.
All of our Spacers and Adaptors are Made in USA with USA Made Materials.
With Medice Manufacturing Valve Cover Spacers you no longer have to use tall valve covers to clear enhanced-performance valve train components.
Utilize your factory valve cover (or any valve cover) and gain space for high performance valve train parts/components.
We also manufacture valve cover adaptors / conversion kits to put different valve covers on different engines.
OurGASKETLOKfeature incorporates a relief cut in critical areas. This addition process causes the gasket material to become imbedded into the spacer providing a tighter grip of the gasket against the spacer surface.GASKETLOKis compatible will all premium gaskets on the market. The result is a better seal with greater gripping action to keep the gasket in place.

Some information about installing our valve cover spacers.

IF you are usinganaftermarket aluminum head with agood, machinedvalve cover surface many people (includingmyself)just silicone the spacer to thehead.
IF you are using a cast aluminum valve cover & it is good, flat & straight in the gasket surface then just use Silicone (form-a-gasket) between the spacer &valve cover.
IF your Head is as cast and rough,we recommend using a gasket between the spacer and the head.
IF you are using a tin valve cover (once again MUST be flat) I recommend a gasket between spacer & valve cover.
MOST IMPORANT everything MUST be clean & MUST use a good quality gasket.
The BEST silicone I have found is Ford Motorcraft RTV for use on 7.3 Power Stroke Diesel Engines. Motorcraft Part number (TA31). You can get it at your local Ford Dealer.
We also encloseaninformation sheet with each set of spacers sold.