CHADWICK Wireless immobilizer car engine lock 501A For Sale - New and Used

For 12V vehicle CAR INTELLIGENT INDUCTION ANTI-THEFT SYSTEM Replaceable nondestructive installation relay-shaped automobile hidden lock anti-hijacking deviceDifferent vehicles have different relay shapes and need to be replaced accordingly.Default model A ,if Model B unavailableOutstanding features1. Car engine anti-theft device2. Free installation of automatic induction replacement relay, invisible installation is not easy to identify3. No need to operate in automatic induction mode of the remote controller, you can switch between manual mode and automatic mode4. No damage to the original car wire, fast and convenient installation5. After the flame is turned off, it will automatically cut off the fuel, close to the vehicle and automatically open the oil path, the sensing distance is about 15 meters6. Anti-shielding and anti-interference technology, the chip is stable7. Only suitable for 12V gasoline vehiclesFeatures:The working principle of the unit-relay:■Start the engine for the first time: the unit starts scanning the sensor ID password, which matches within 25 seconds, The car can be driven off successfully. If not successful, the fuel circuit will be cut off after 25 seconds, and the engine will stop.■Start the engine for the 2nd time: the unit shortens the scanning time to 20 seconds.■Start the engine for the 3rd time: the unit shortens the scanning time to 10 seconds.■Start the engine for the 4th time: Unit can not scan correct password that it was started illegally. No matter how many times it is started, the unit can sense the correct password before driving the car.SPECIFICATIONElectrical performance:1. Remote control: Static current is about 0mA, Working current is 5mA. Battery specifications: CR20322. Unit-relay :working current is about 20mA, load current : Model A 30A, Model B 40A, Model C 40A.Attention:1. The unit relay replaces the original vehicle relay without breaking the wire. The original vehicle only supplies power to drive the internal coil control switch on and off when the vehicle is ignited,which will not affect other functions of the original vehicle.2. The unit supports the start and stop function of the original car.3. It is normal for some models to illuminate the fault light during the unit test function. Generally, the automatic induction mode is turned on and it will be automatically eliminated after a few days of normaldriving.4. After some models are turned off, the relay will continue to supply power for more than ten seconds without affecting the use. After restarting, it will restart continuously. If the host cannot receive the signal from the remote control, it will turn off.NOTE: THIS PRODUCT DOES NOT CONTROL THE DOORS AND DIRECTION LIGHTS OR OTHER PARTS, ONLY THE OIL CIRCUIT OR CIRCUIT.THE ENGINE CANNOT BE STARTED TO PREVENT THEFT.Function test: After the unit is installed, the engine will stop after 25 seconds without pressing the remote control button in manual mode. When the car starts normally after pressing the remote control button, the product is correctly installed.?? (Relative delay for replacing the oil pump relay is 3 ~ 5 seconds)Package Include,Product composition:Unit-Relay*1PCS, induction remote control*2PCS,manual*1PCSBOX SIZE:150**82*45MMWeight:0.13KG

---