LAST CHANCE MOTO
Shoei X-Fourteen Helmet X-14 Aerodyne TC-1 Red Size MediumLimitedOFFERFINAL OffersLowest PricesFast ShippingShoei X-14 Helmet
There are few helmets in the past few years that have generated as much interest as has the introduction of the Shoei X-14 Helmet, and for good reason. It is a true juggernaut of the track, and every line, every angle and every curve has been specially crafted to get the most out of you and your machine. It’s no wonder that the most sophisticated racers in the world are already rocking it at the highest levels
Aerodynamic Shell Design
- Aerodynamic properties are maximized through extensive wind tunnel testing and professional riders’ response
- Dual-Layer Multi-Density EPS liner enhances impact absorption and ventilation
- Four shell and five EPS liner sizes present increased fit options that help to comfortably fit most head sizes
- Impact absorbing EPS liner throughout the entire chin bar with Cheek Pad Cooling System
- Standard Rear Flaps can be replaced with optional, narrower flaps to customize aerodynamics, depending on rider preference and track demands
- Removable Lower Air Spoiler can be affixed to the chin bar to improve aerodynamic stabilization
Lightweight, Advanced Integrated Matrix Plus (AIM+)
- High performance fiber materials are combined with extremely elastic organic fibers into shell construction for a structure that is ultra lightweight, rigid, and resilient
CWR-F Shield and QR-E System
- QR-E base plate system allows for tool-less shield removal and installation
- Exclusive patent pending Vortex Generators on shield reduce air friction
- Scratch-resistant coating and Pinlock EVO Fog Resistant System
- 99% protection from harmful UV A & B rays
- All-new double shield locking mechanism prevents unwanted shield openings
Ventilation System
- Upper air intake vent is positioned to maximize air volume into the helmet interior
- Top outlet vent is separate from the Rear Stabilizer, allowing it to be positioned for optimum flow-through ventilation
- Cheek Pad Cooling System features channels cut through the EPS liner and corresponding air holes in the cheek pad foam, cooling and clearing warm, humid air away from the rider’s face
- Breath guard and chin curtain included
3D Max-Dry Custom Interior System
- The entire interior lining (cheek pads, upper liner, and chin strap covers) can be removed for cleaning and replaced with optional thicknesses for a customizable fit
- Cheek pads and center pad can be manipulated to allow riders to adjust the position/angle of the helmet by up to four degrees, increasing the upper field of vision while tucked in extreme racing positions
- Comfortable, 3D Max-Dry helmet liner material absorbs and dissipates sweat and moisture twice as fast as traditional nylon interiors, keeping aggressive riders cool and dry
- E.Q.R.S. (Emergency Quick Release System) allows emergency medical personnel to easily remove the cheek pads from an injured rider’s helmet, enabling the helmet to be more easily removed from the head
- Extra comfort provided by ear pads, removable breath guard, and chin curtain
Safety
- Snell M2020D and DOT-218 Approved
We accept payment by any of the following methods: PayPal Google Pay Visa MasterCard AMEX Discover
Please pay as soon as possible after winning an sale, as that will allow us to ship your item to you sooner!
Payment
BUY NOW!
Returns
Shipping
This is an “All Sales Final” listing. Returns/Exchanges are not accepted. If the product received is not as described in the listing, please contact LastChanceMoto within 30 days to discuss a resolution. We recommend verifying all part numbers and fitment information prior to purchasing. Please feel free to contact LastChanceMoto with any questions about the product fitment or condition prior to style="text-align:justify">
We offer FREE shipping on all orders!
Your order will be dispatched within 1 working day of receiving payment (Monday-Friday) and you should expect to receive the order within 3-5 business days via UPS, USPS, or FedEx
In the unlikely event that your item is lost or damaged during transit, then WE are responsible and will issue either a full refund or replacement if available.
Lowest PricesFinal OffersFast ShippingShoei X-14 Helmet There are few helmets in the past few years that have generated as much interest as has the introduction of the Shoei X-14 Helmet, and for good reason. It is a true juggernaut of the track, and every line, every angle and every curve has been specially crafted to get the most out of you and your machine. It’s no wonder that the most sophisticated racers in the world are already rocking it at the highest levels Aerodynamic Shell Design ---Aerodynamic properties are maximized through extensive wind tunnel testing and professional riders’ response ---Dual-Layer Multi-Density EPS liner enhances impact absorption and ventilation ---Four shell and five EPS liner sizes present increased fit options that help to comfortably fit most head sizes ---Impact absorbing EPS liner throughout the entire chin bar with Cheek Pad Cooling System ---Standard Rear Flaps can be replaced with optional, narrower flaps to customize aerodynamics, depending on rider preference and track demands ---Removable Lower Air Spoiler can be affixed to the chin bar to improve aerodynamic stabilization Lightweight, Advanced Integrated Matrix Plus (AIM+) ---High performance fiber materials are combined with extremely elastic organic fibers into shell construction for a structure that is ultra lightweight, rigid, and resilient CWR-F Shield and QR-E System ---QR-E base plate system allows for tool-less shield removal and installation ---Exclusive patent pending Vortex Generators on shield reduce air friction ---Scratch-resistant coating and Pinlock EVO Fog Resistant System ---99% protection from harmful UV A & B rays ---All-new double shield locking mechanism prevents unwanted shield openings Ventilation System ---Upper air intake vent is positioned to maximize air volume into the helmet interior ---Top outlet vent is separate from the Rear Stabilizer, allowing it to be positioned for optimum flow-through ventilation ---Cheek Pad Cooling System features channels cut through the EPS liner and corresponding air holes in the cheek pad foam, cooling and clearing warm, humid air away from the rider’s face ---Breath guard and chin curtain included 3D Max-Dry Custom Interior System ---The entire interior lining (cheek pads, upper liner, and chin strap covers) can be removed for cleaning and replaced with optional thicknesses for a customizable fit ---Cheek pads and center pad can be manipulated to allow riders to adjust the position/angle of the helmet by up to four degrees, increasing the upper field of vision while tucked in extreme racing positions ---Comfortable, 3D Max-Dry helmet liner material absorbs and dissipates sweat and moisture twice as fast as traditional nylon interiors, keeping aggressive riders cool and dry ---E.Q.R.S. (Emergency Quick Release System) allows emergency medical personnel to easily remove the cheek pads from an injured rider’s helmet, enabling the helmet to be more easily removed from the head ---Extra comfort provided by ear pads, removable breath guard, and chin curtain Safety ---Snell M2020D and DOT-218 Approved
LAST CHANCE MOTO
Shoei X-Fourteen Helmet X-14 Aerodyne TC-1 Red Size MediumLimitedOFFERShoei X-14 Helmet
There are few helmets in the past few years that have generated as much interest as has the introduction of the Shoei X-14 Helmet, and for good reason. It is a true juggernaut of the track, and every line, every angle and every curve has been specially crafted to get the most out of you and your machine. It’s no wonder that the most sophisticated racers in the world are already rocking it at the highest levels
Aerodynamic Shell Design
- Aerodynamic properties are maximized through extensive wind tunnel testing and professional riders’ response
- Dual-Layer Multi-Density EPS liner enhances impact absorption and ventilation
- Four shell and five EPS liner sizes present increased fit options that help to comfortably fit most head sizes
- Impact absorbing EPS liner throughout the entire chin bar with Cheek Pad Cooling System
- Standard Rear Flaps can be replaced with optional, narrower flaps to customize aerodynamics, depending on rider preference and track demands
- Removable Lower Air Spoiler can be affixed to the chin bar to improve aerodynamic stabilization
Lightweight, Advanced Integrated Matrix Plus (AIM+)
- High performance fiber materials are combined with extremely elastic organic fibers into shell construction for a structure that is ultra lightweight, rigid, and resilient
CWR-F Shield and QR-E System
- QR-E base plate system allows for tool-less shield removal and installation
- Exclusive patent pending Vortex Generators on shield reduce air friction
- Scratch-resistant coating and Pinlock EVO Fog Resistant System
- 99% protection from harmful UV A & B rays
- All-new double shield locking mechanism prevents unwanted shield openings
Ventilation System
- Upper air intake vent is positioned to maximize air volume into the helmet interior
- Top outlet vent is separate from the Rear Stabilizer, allowing it to be positioned for optimum flow-through ventilation
- Cheek Pad Cooling System features channels cut through the EPS liner and corresponding air holes in the cheek pad foam, cooling and clearing warm, humid air away from the rider’s face
- Breath guard and chin curtain included
3D Max-Dry Custom Interior System
- The entire interior lining (cheek pads, upper liner, and chin strap covers) can be removed for cleaning and replaced with optional thicknesses for a customizable fit
- Cheek pads and center pad can be manipulated to allow riders to adjust the position/angle of the helmet by up to four degrees, increasing the upper field of vision while tucked in extreme racing positions
- Comfortable, 3D Max-Dry helmet liner material absorbs and dissipates sweat and moisture twice as fast as traditional nylon interiors, keeping aggressive riders cool and dry
- E.Q.R.S. (Emergency Quick Release System) allows emergency medical personnel to easily remove the cheek pads from an injured rider’s helmet, enabling the helmet to be more easily removed from the head
- Extra comfort provided by ear pads, removable breath guard, and chin curtain
Safety
- Snell M2020D and DOT-218 Approved
BUY NOW!
Payment
We accept payment by any of the following methods: PayPal Google Pay Visa MasterCard AMEX Discover
Please pay as soon as possible after winning an sale, as that will allow us to ship your item to you sooner!
Shipping
We offer FREE shipping on all orders!
Your order will be dispatched within 1 working day of receiving payment (Monday-Friday) and you should expect to receive the order within 3-5 business days via UPS, USPS, or FedEx
In the unlikely event that your item is lost or damaged during transit, then WE are responsible and will issue either a full refund or replacement if available.
Returns
This is an “All Sales Final” listing. Returns/Exchanges are not accepted. If the product received is not as described in the listing, please contact LastChanceMoto within 30 days to discuss a resolution. We recommend verifying all part numbers and fitment information prior to purchasing. Please feel free to contact LastChanceMoto with any questions about the product fitment or condition prior to ShippingFinal OffersLowest PricesShoei X-14 Helmet
There are few helmets in the past few years that have generated as much interest as has the introduction of the Shoei X-14 Helmet, and for good reason. It is a true juggernaut of the track, and every line, every angle and every curve has been specially crafted to get the most out of you and your machine. It’s no wonder that the most sophisticated racers in the world are already rocking it at the highest levels
Aerodynamic Shell Design
- Aerodynamic properties are maximized through extensive wind tunnel testing and professional riders’ response
- Dual-Layer Multi-Density EPS liner enhances impact absorption and ventilation
- Four shell and five EPS liner sizes present increased fit options that help to comfortably fit most head sizes
- Impact absorbing EPS liner throughout the entire chin bar with Cheek Pad Cooling System
- Standard Rear Flaps can be replaced with optional, narrower flaps to customize aerodynamics, depending on rider preference and track demands
- Removable Lower Air Spoiler can be affixed to the chin bar to improve aerodynamic stabilization
Lightweight, Advanced Integrated Matrix Plus (AIM+)
- High performance fiber materials are combined with extremely elastic organic fibers into shell construction for a structure that is ultra lightweight, rigid, and resilient
CWR-F Shield and QR-E System
- QR-E base plate system allows for tool-less shield removal and installation
- Exclusive patent pending Vortex Generators on shield reduce air friction
- Scratch-resistant coating and Pinlock EVO Fog Resistant System
- 99% protection from harmful UV A & B rays
- All-new double shield locking mechanism prevents unwanted shield openings
Ventilation System
- Upper air intake vent is positioned to maximize air volume into the helmet interior
- Top outlet vent is separate from the Rear Stabilizer, allowing it to be positioned for optimum flow-through ventilation
- Cheek Pad Cooling System features channels cut through the EPS liner and corresponding air holes in the cheek pad foam, cooling and clearing warm, humid air away from the rider’s face
- Breath guard and chin curtain included
3D Max-Dry Custom Interior System
- The entire interior lining (cheek pads, upper liner, and chin strap covers) can be removed for cleaning and replaced with optional thicknesses for a customizable fit
- Cheek pads and center pad can be manipulated to allow riders to adjust the position/angle of the helmet by up to four degrees, increasing the upper field of vision while tucked in extreme racing positions
- Comfortable, 3D Max-Dry helmet liner material absorbs and dissipates sweat and moisture twice as fast as traditional nylon interiors, keeping aggressive riders cool and dry
- E.Q.R.S. (Emergency Quick Release System) allows emergency medical personnel to easily remove the cheek pads from an injured rider’s helmet, enabling the helmet to be more easily removed from the head
- Extra comfort provided by ear pads, removable breath guard, and chin curtain
Safety
- Snell M2020D and DOT-218 Approved
