1268-5403 400A 36V/48V Programmable DC SepEx Motor Controller For CURTIS IP67 US For Sale - New and Used

Part Number:1268-5403

For CURTIS Programmable DC SepEx Motor Controller
36V/48V--400A, Optional Connectors Kit

Specifications:
PWM operating frequency: 16 kHz
Electrical isolation to heatsink (min.): 500 VAC
KSI input voltage (minimum): 16.8 V
KSI input current (typical): 160 mA without programmer; 200 mA with programmer
Ambient operating temperature range: -40°C to 50°C
Heatsink overtemperature cutback: starts at 85°C; cutoff at 95°C
Heatsink undertemperature cutback: 50% armature current at -25°C

Key Features:
CURTIS Model: 1268-5403
Norminal Battery Voltage (Volts): 48V (default setting) or 36V
Amature 2 minute current rating (amps): 400A
Field 2 minute current rating (amps): 50A
Logic enable and logic power input voltage (minimum):16.8 V
Logic enable and logic power input current (no contactors engaged): 160 mA without programmer; 200 mA with programmer
Logic input voltage: 20.0 V High; 7.5 V Low
Logic input current 10 mA
Throttle Type: various throttles can be used with the 1268 controller, including 5kΩ 3-wire potentiometers and 0–5V throttles.
Dimensions: L229xW178xH81 mm
Net Weight: 3.9 kg
Package environmental rating: IP64, IP67

Features Include:
Regenerative braking, providing longer operation on a single battery charge and reducing motor brush wear and motor heating
Adjustable brake rates, for smooth pedal-release braking
Two user-selectable vehicle operating personalities, with vehicle top speed controlled and limited in each mode
Motor parameters are programmable to match the characteristics of the specific motor being used
Vehicle speed control is enhanced through response from a Hall effect speed sensor
Anti-rollback function, providing improved control when throttle is released on hills
Anti-stall function helps prevent motor commutator damage
High pedal disable (HPD) and static return to off (SRO) interlocks prevent vehicle runaway at startup
Complete diagnostics through CURTIS 1313-4331 Handheld Programmer or 1314 PC Programming Station and through the built-in Status LED, for quick and easy testing, diagnostics, and parameter adjustment
WalkAway™ braking feature limits any stopped or key-off rolling to a very low speed
Auxiliary driver can be programmed for either an electromagnetic (EM) brake or a WalkAway™ relay
Coil driver provides adjustable pull-in and holding voltages to WalkAway™ relay or EM brake
Two fault outputs provide diagnostics to remotely mounted displays
Reverse signal driver provides a low signal any time the vehicle is traveling in reverse
Driver outputs are short circuit protected and provide built-in coil spike protection
Brake/Drive Interlock meets ISO stopping distance requirements
Warning buzzer sounds steady in reverse, intermittent during WalkAway™ braking
Splash resistant plastic cover
Meets or exceeds EEC fault detect requirements1268-5403 controllers are widely applied in different electric vehicles, such as golf carts and utility vehicles. For current golf cart user, please take a reference with the parameters\' list of different vehicle models; for comparing the difference of parameters modified, please see the parameter list of default setting of controller 1268-5403.

Fitment :For Curtis Electric forklift

Package Included: 1 X 1268-5403

Notes:

-Please make sure the OE number matches the part you are replacing.

-Please be very careful to check our photos, make sure the photo showed is same as you wanted.

-Professional installation in highly recommended (No instruction included)

ACCESSORIES COMPATIBLE WITH CURTIS 1268

1. Curtis 1314 - a compatible 32-bit application that runs on personal computers with Windows as an operating system that functions similarly to the handheld Curtis controller.

2. Curtis 1311 - a programmer that assists in parameter control and system diagnostics.

DIMENSIONS

WIRING DIAGRAM

Wiring Diagram for 1268 with EM brake

International buyers please note:

A.Import duties, taxes and charges are not included in the item price or shipping charges. These charges are buyer’s responsibility.
B.Please check with your country\'s customs office to determine what these additional costs will be prior to buying.