1955 Buick Super Roadmaster LH RH Tail Light Pair OEM Guide R4-55 CoresUSED ORIGINAL VINTAGE LIGHTING — UNTESTED
This is a used original assembly from long-term parts inventory. It has not been powered or vehicle-tested. Bulb and socket operation is unknown. No claim is made that the assembly has been tested or confirmed to function.Identification
- Part type: Tail light assembly pair
- Manufacturer / lens / casting number: R4-55; R2H; 5946071 lens
- OE/OEM reference: 5946071 lens
- Hollander / interchange reference: No valid current Hollander assembly number found
- Placement: Rear, Left, Right
- Reference application: 1955 Buick Super Series 50 and Roadmaster Series 70 full tail lamp housings. Guide R4-55 deep-red lens reference is shared more broadly; verify the complete housing shape for the vehicle.
Fitment and interchange notice
1955 Buick Super Series 50 and Roadmaster Series 70 full tail lamp housings. Guide R4-55 deep-red lens reference is shared more broadly; verify the complete housing shape for the vehicle.
Compatibility information is provided only as a research/reference application and is not a guarantee of direct interchange. The buyer or installer must compare every stamped, molded and cast number; model year; body style; trim; side; lens pattern; bezel finish; socket layout; connector or wiring; mounting stud; mounting tab; and housing shape with the original part before purchase. Similar-looking lamps may not interchange.
The physical part, visible markings and photos control this sale. Hollander and seller-tag numbers are included as identification aids only, especially where the older inventory tag could not be independently confirmed.
What is included
LH and RH assemblies; lenses; sockets; retaining hardware as pictured. No bulbs or additional hardware are included unless shown and stated.
Condition details
Please read description and see photos. Restoration-core pair with heavy pitting and corrosion. LH housing and lenses appear largely intact. RH housing is cracked/holed and its center lens shows cracking. Red lenses appear intact. Sockets and retaining hardware are included as pictured. Untested.
Vintage lighting can have brittle plastic, hardened seals, faded lenses, pitting, oxidation, old repairs, stress cracks and hidden damage that may not be obvious in every photo. Cleaning, polishing, rewiring, resealing, repair or restoration may be required. Inspect the lens edges, chrome or painted trim, rear housing, sockets, studs and mounting tabs in every photo.
Installation, handling and returns
Installation and electrical testing should be performed carefully using the vehicle manufacturer's procedures. Incorrect wiring, excessive bulb heat, damaged grounds, overtightened fasteners or forcing brittle mounting points can damage an old lamp. New bulbs, gaskets, sealant and wiring repairs may be needed and are not included unless shown.
Returns, if available, are governed by the return policy displayed on the listing and applicable rules. Any return must be processed through and must be the same identifiable part, complete and in the same condition received. Labor, refinishing, installation, repair, shipping preparation and other incidental expenses are not included in the purchase price or reimbursed.
Please ask questions and compare all numbers and photos before purchasing.
Estimated packed shipping
Estimated packed carton: 24 x 18 x 12 in; estimated packed weight: 18 lb. This is a planning estimate for protective packing; final packed measurements may vary. The assembly will be cushioned to protect lenses, bezels, studs, sockets and brittle mounting points.
