This brand new hydro-boost system and directions are specified to fit the 1986-1987 Turbo Regal models with the understanding that the application is specific - This means you must have the original powermaster brake pedal in your Turbo Regal for it to bolt up. You will also need the firewall mounting bracket that the powermaster bolts to, so you can attach it to the new hydro-boost unit.
Everything in this kit is brand new.
NOTE - if you need a pedal assembly. It is NOT compatible with a vacuum assist G-Body brake pedal. Kit comes complete with everything you need including the fasteners to secure the master cylinder to the brake unit. The actual hydro-boost unit complete with the special adapter is drop shipped from our supplier. Everything else in this kit, including the directions and receipt, is shipped from our warehouse in Pennsylvania. You can expect to receive the hydro-boost unit within a week of getting the other parts from us.
NOTE - We recommend you either clear coat or paint the master cylinder prior to installing it, since it is brand new bare metal.
This kit is 100% BRAND NEW high-quality direct bolt-in hydraulic brake assist system designed to upgrade your brakes with a powerful and compact modern hydraulic assist unit. This system includes everything you need to install into your vehicle. It consists of a direct fit high-performance high-pressure rubber hoses, brake assist unit, heavy-duty power steering return line, pedal rod hardware and mounting hardware. Using all new parts, this unit puts out an amazing 2400 psi line pressure at the front calipers. Here are the specifics: - This model fits the later GM "short rod / shallow" master cylinder design - Designed to fit with the 1986-1987 remote power steering reservoir - For use with disc / drum OR disc / disc brakes - Installed adapter, so it can be installed in either direction on the firewall mount - Features an adjustable brake pedal rod set to provide OEM pedal height - High-pressure rubber power steering hoses will need to be cut and fitted in your application - No firewall modifications required - Slight modification is required to enlarge the center hole of the firewall mount KIT INCLUDES - 1 - Instruction booklet of detailed directions and photos. 1 - New CPB Hydro-boost unit with installed adapter plate 1 - Brand new Corvette master cylinder (It's best to either paint or clear coat it to avoid rust issues) 1 - Reproduction foam gasket replaces the original gasket between the actual unit and the firewall 1 - Magna Pure filter with clamps 1 - Brass, barbed 3/8 return line T fitting 1 - 6 foot low pressure return hose 2 - High-pressure 5/16 pressure lines. Both have one end already made up approximately 4 foot each in length. 6 - Small hose clamps 12 - Assorted fittings (some you may or may not need to use, depending on how you wish to run the return line) Kit comes with very detailed instructions in clear, easy-to-read and understand format.
NOTE - We highly recommend installation be done by a qualified auto mechanic.