With the spacer installed you can now re-fit the wheel. Use the same technique to tighten the wheel nuts as you did with the spacer. Finally, torque the wheels nuts to the manufacturers specifications and lower the car to the ground. Repeat this process on the other axle or all corners, depending on whether you have purchased a pair or a Installation is Highly Recommended.*If you have any questions about the product, you can contact us at any time.
Item SpecificsBrand Maxpower-carpartsManufacturer Warranty 1 YearPerformance Part YesVintage Car Part NoUniversal Fitment NoType Wheel AdapterManufacturer Part Number 13468040Item Quantity 1 PairItem Color BlackItem Material AluminumVehivle Bolt Pattern 5x4.5 (5x114.3mm)Wheel Bolt Pattern 5x5.5 (5x139.7mm）Hub Bore 73mmThickness 1.25"Torqued Down By Hand At 75-85 FT/LBSPlacement on Vehicle Left Right
Payment We only accept payment through .
Shipping 1.Item will be shipped within 1-3 business days after your payment is cleared.2. All Packages will be Inspected before Shipping, We will Provide All Packing Material Needed for Your Package to Improve Shipping Safety.3. We only ship to the confirmed address. If you want to change the address or let us send it directly to your relevant or friends, please kindly contact us when you make payment.Returns 1.For returns, simply send your order back within 30 days and you get your money back. All we ask is you send it back in the same condition it was received - new and un-used.2. For Defective or Damaged Item, Please Contact US and Provide as Much Problem Details as Possible, We will Consider to Waive Return or Replacement Item and then Issue Full Refund to you Directly after Problem is Confirmed.3. In order to process a return or exchange, please send us a message through and we will be happy to assist you immediately. Your satisfaction is our priority.response We are responsible company, only strive for 5 star positive response and will try our best to offer the best service to our buyer. Please email us before leaving negative response or open any dispute and please give us 2business days to resolve the complaint to your satisfaction.
Contact Us If there is an issue with shipping or the item you purchased please contact us via message or call us before opening a case or leaving response.
We will try our best to resolve any kind of issue.
DESCRIPTIONPAYMENTSHIPPINGRETURN POLICYCONTACT US Shop CategoryStore Home Knock Sensor Position Sensor Resistor Radiator Belt Tensioner Oil Level Dipstick Front Turbo Fuel Pump Radiator Support Assembly Engine Water Pump Timing Belt Water Pump Kit Engine Timing Chain Kit Harmonic Balancer Coolant Reservoir HVAC Heater Crankshaft Engine Hoists & Stands Package Removal Insertion Tool Set Cooling Fan Condenser A/C Compressor Thermostat Throttle Body HVAC Blower Motor Motor Mount Head Gasket Set Air Door Actuator Wheel Spacer Radiator Fan Assembly Axle Shaft OtherHot Item 2x 1.5\" 4x136 4/136 Wheel Spacers 12x1.5 For Honda Talon 1000R 1000X 1000RS USD 53.68 2x 10mm 5x100 or 5x112 Hub Centric Wheel Spacers 14x1.5 For 1989-1991 Audi 100 USD 29.32 2x 5x4.5 or 5x4.75 Wheel Spacer 1/2 inch Thick For Chevrolet Corvette 1984-2019 USD 22.09 2x 1.25\" 5x115 Hub Centric Wheel Spacers 14x1.5 For Dodge Challenger 2008-2023 USD 42.50 2x 1.25\" 6x5.5 Hub Centric Wheel Spacers 14x1.5 For Toyota Tacoma 2024-2025 USD 49.54 New List Item New Front Detonation Knock Sensor For 11-14 Mazda 2 1.5L l4 GAS DOHC USD 12.09 2x 2\" 4x101.6 Wheel Spacers 1/2\"x20 For 2014-2022 ClubCar Carryall 300 Turf USD 54.19 Timing Belt Water Pump Kit For 02-07 Mitsubishi Lancer 2.0 L4 1999CC 2000CC SOHC USD 59.49 New Aluminum Radiator Replacement For 07-2009 Honda CR-V 2.4L GAS Sport Utility USD 76.69 For 2001-2006 BMW X5 3.0L 4.4L 4.8L CV Axle Front Right 31607565314.K 66-9256.K USD 83.49 Help & InfoPayment PolicyShipping PolicyReturn PolicyFAQAbout Us 2x 1.25" 5x4.5 to 5x5.5 Conversion Wheel Adapters For Jeep Cherokee 1980-2001 For：
Ford Bronco 1982-1990 Jeep Cherokee 1980-2001
Ford Crown Victoria 1991-2007 Jeep Comanche 1986-1992
Ford Edge 2007-2011 Jeep Grand Cherokee 1993-1998
Ford Explorer 1991-2010 Jeep Liberty 2002-2012
Ford Mach 1 2003-2004 Jeep Wrangler 1987-2006
Ford Mustang 1967-1973&1994-2011 Lincoln Aviator 2003-2010
Ford Ranger 1981-2002 Lincoln Mark 7 1984-1992
Mazda B2500 1998-2001 Lincoln Town Car 1982-2004
Mazda B3000 1994-2007 Mazda Navajo 1991-1994
Mazda B4000 1994-2009 Mercury Mountaineer 1996-2010
Package Included:
2x Wheel Thickness: 1.25 inch or 32 mm
Vehicle bolt pattern: 5x4.5 inch or 5x114.3 mm
Wheel bolt pattern：5x5.5 inch or 5x139.7 mm (Note: Adapters does NOT work for stock/ orginal rims)
Thread Size：1/2" x 20
Bolt Shack Length: 35 mm
Torqued Down By Hand At: 75-85 FT/LBS
Hub Bore: 73 mm
Number of Pieces: 2pcs
How to install your Wheel Adapters：
- Installing spacers is a relatively easy job and can be performed with basic tools and a jack. With your car still on the floor slightly lossen your wheel bolts or nuts to prevent the wheel spinning, a breaker bar may be necessary if they are tight. Once loose the car can be jacked up and the nuts can be removed. Take off the wheel and place to one side.
- On an older car you may have developed some corrosion on the brake disc surface. This needs to be nice and clean to mount the spacer so use a wire brush to remove any debris prior to fitting the spacer.
- With the surface clean, place the spacer into position and use the nuts supplied with the spacers to secure the spacer to the car. Evenly tighten the nuts in a star formation before torqueing to the manufacturers specification. You may need someone to press the brakes for you while you do this.
- With the spacer installed you can now re-fit the wheel. Use the same technique to tighten the wheel nuts as you did with the spacer. Finally, torque the wheels nuts to the manufacturers specifications and lower the car to the ground. Repeat this process on the other axle or all corners, depending on whether you have purchased a pair or a Installation is Highly Recommended.
*If you have any questions about the product, you can contact us at any time.
Item SpecificsBrand :Maxpower-carpartsManufacturer Warranty :1 YearPerformance Part :YesVintage Car Part :NoUniversal Fitment :NoType :Wheel AdapterManufacturer Part Number :13468040Item Quantity :1 PairItem Color :BlackItem Material :AluminumVehivle Bolt Pattern :5x4.5 (5x114.3mm)Wheel Bolt Pattern :5x5.5 (5x139.7mm）Hub Bore :73mmThickness :1.25"Torqued Down By Hand At :75-85 FT/LBSPlacement on Vehicle :Left Right
PaymentShippingReturnsresponseContact Us We only accept payment through .
1.Item will be shipped within 1-3 business days after your payment is cleared.2. All Packages will be Inspected before Shipping, We will Provide All Packing Material Needed for Your Package to Improve Shipping Safety.3. We only ship to the confirmed address. If you want to change the address or let us send it directly to your relevant or friends, please kindly contact us when you make payment. 1.For returns, simply send your order back within 30 days and you get your money back. All we ask is you send it back in the same condition it was received - new and un-used.2. For Defective or Damaged Item, Please Contact US and Provide as Much Problem Details as Possible, We will Consider to Waive Return or Replacement Item and then Issue Full Refund to you Directly after Problem is Confirmed.3. In order to process a return or exchange, please send us a message through and we will be happy to assist you immediately. Your satisfaction is our priority. We are responsible company, only strive for 5 star positive response and will try our best to offer the best service to our buyer. Please email us before leaving negative response or open any dispute and please give us 2business days to resolve the complaint to your satisfaction.
If there is an issue with shipping or the item you purchased please contact us via message or call us before opening a case or leaving response.
We will try our best to resolve any kind of issue.
All right reserved.
![2x 1.25\](parts-image-large/g/P6QAAeSwZ4ZqyXY4/s-l1600/2x-1-25-5x4-5-to-5x5-5-Conversion-Wheel-Adapters-F.jpg "2x 1.25\")
