30-3300 AEM V3 Water/Methanol Injection Kit For Sale - New and Used

• Our store
• About Us
• Contact Us
• Add to Favorite Sellers

30-3300 AEM V3 Water/Methanol Injection Kit 35 PSI Max Standard Controller - 1.15 Gallon Reservoir. Water/Methanol for High Compression Naturally Aspirated and Forced Induction Gas Engines AEM offers two different water/methanol controller designs: One is boost dependent (Kit PN 30-3300) for forced induction vehicles up to 35 PSI of boost.The Boost Dependent controller has an on-board manifold absolute pressure (MAP) sensor with a molded-in nipple for a boost hose pickup. The second controller (Kit PN 30-3350) features a multiple input design that enables users to install AEM\'s Water/Methanol Injection Kit on both high compression naturally aspirated vehicles (NA) via the MAF/IDC settings and ultra-high boost vehicles (above 35 PSI) using an external MAP sensor.The Multi Input controller works with an external 0-5v voltage-based external MAP sensor, a frequency based input for Injector Duty Cycle (IDC), frequency-based mass airflow (MAF), or a 0-5v voltage-based MAF. Robust, Easy to Use Controller Designs The new controller designs feature large, turn-resistant knobs and larger numbering to easily set accurate start and full activation points, with covered status LED and test buttons for added splash resistance.A plug is integrated into the controller housing for mating to the redesigned wiring harness\'s positive-lock connector. The Boost Dependent controller housing has a molded-in, barbed nipple to accept a boost hose and a wiring legend on the back.The Multi Input controller has an easy-to-remove plug covering the programming dipswitches and a programming legend on the back for the 0-5v and frequency based settings. Both controller housings feature an easy to access integrated fuse and molded mounting tabs.Boost Safe FeatureThese new controllers retain the \"Boost Safe\" injection failsafe system, which is an output that will activate if there is a short, loss of continuity or high or low voltage or low fluid condition, allowing users to define their failsafe strategy from something as simple as flashing a warning light to more advanced strategies like pulling boost or ignition, or switching fuel maps on a standalone engine management system. Simplified Wiring. The new wiring harness is terminated with a positive-lock connector on one end and has color-coded wires to ease installation. An integrated Pump Ground circuit is included in the harness which simplifies the wiring process and eliminates any chance of the pump accidentally activating from a short in the system. An additional wire is included for adding an optional on/off solenoid to stop fluid flow when the system is inactive. Improved Injector Flow Rate & Nozzle Sizes AEM\'s engineers spent extensive time revamping the controller\'s flow control strategy for a more linear flow output delivery. This means that the flow delivery better matches an engine\'s need for water/methanol injection, which further optimizes charge air cooling and detonation control. Three resized injector nozzles are in each kit and allow for improved flow capability (a flow graph is available in our instructions).New Low Level Fluid Indicator A more accurate, conductive low level fluid sensor is integrated into the tank and features a positive lock connector with color-matched wires to the wiring harness. The sensor eliminates any chance of incorrect readings due to interference from debris.

• Terminated harness features positive lock connector with integrated pump ground circuit and additional wire for optional on/off flow solenoid
• 1-gallon tank with built-in conductive low fluid level indicator
• Includes \"Boost Safe\" readiness failsafe system
• One machined billet injector with integral check valve to prevent unintended flow
• Three interchangeable injector nozzles to cover a wide variety of HP levels (250cc/min, 500 cc/min & 1,000cc/min)
• Recirculation-style pump with integral fittings for quiet operation
• LED dash light for system status and low fluid warning
• 20 ft. of high-pressure nylon injection tubing
• CONTROLLER FEATURES:
• 30-3300 Boost Dependent kit (up to 35PSI) includes molded-in nipple for boost hose
• 30-3350 Multi Input kit for high compression naturally aspirated and forced induction applications
• Large adjustment knobs and numbering for easy programming
• Covered status LED and test button for improved splash resistance
• Integrated plug for mating to positive-lock connector on harness
• Integrated fuse and mounting tabs

General Policies

Payment Method

• We gladly accept PayPal and All Major Credit Cards.

Warranty & Return Policy

• Holley Performance Products warrants new products to be free from defects in material and workmanship for a period of 90 days from date of purchase.
• Holley Performance Products Limited Warranty specifically does not apply to products, which have been (a) modified or altered in any way; (b) subjected to adverse conditions, such as misuse, neglect, accident, improper installation or adjustment, dirt or other contaminants, water,corrosion, or faulty repair; or (c) used in other than those applications recommended by Holley Performance Products. Holley Performance Products also does not warrant, and disclaims all liability for products used in racing activities and/or applications other than those specifically recommended in the current brand catalog.
• Buyer pays return shipping

Shipping & Tracking

• Please see the “Shipping and Payment” tab
• We ship all US orders via United Parcel Service (UPS Ground)
• A signature is required on all UPS orders over $750
• Tracking information will be sent via email after your package ships (you must supply a valid email address during checkout)
• We ship within 1 business day upon receipt of payment
• We do not ship to APO/FPO or US Post Office Box addresses
• We ship internationally thru United States Postal Service (USPS) Express Mail International; allow extra time for international shipments
• We can not ship as a \"GIFT\" or ship anything internationally with changes to the invoice

Customer Service & response

• Our customer service hours are 7:00 am – 4:00 pm Mountain Time Monday thru Friday (excluding holidays)
• If you are not certain about an item or have questions, use the “Ask Seller a Question” link under the listing. We strive to answer questions submitted thru ’s message system within 1 business day
• We want you to be completely satisfied with your purchase – please let us know if you have any problems with your purchase before leaving response so we have a chance to make it right – we want your repeat business!

Check out the official MSD Performancestorefor more great deals!!!

---