36.5sqft Car Sound Deadening Mat Sound Deadener Material insulation with 3 toolsThe principle of noise reduction is as follows:
1: Block sound with a dense barrier (aluminium coated rubber based Sound Deadener.
2: Absorb sound waves with an insulation layer (Acoustic Liner).
Suitable for floors, boots, doors, firewall, roofs, 1/4 panels, under bonnets etc.
Guaranteed not to deteriorate, go brittle and fall off.
How to install
1. Decide what part of the car you want to insulate first: roof, floor, doors or a hood. The insulation of each parts of the vehicle has its own result and contribution to overall outcome. That’s why we recommend you to soundproof all parts of the car for the maximum soundproofing output. Locate the guideline instruction to your car on the internet and carefully read as to how to dismantle a certain panels. Be careful when you take off plastic trim parts to avoid breaking the fixings! Very detailed information can be found on automotive forums.
2. Remove the remains of the factory insulation once you have dismantled the interior ( you need to do that if the factory sound insulation is damaged or not properly fixed). You can leave it there if it’s still in a good shape. Properly clean and degrease the surface prior to installation of deadener. It has to be dry and clean! It won’t be properly fixed and may not last long if you apply the material on a wet or dirty surface. Use a degreaser and dry clean rag for the Step 4. We also recommend wearing gloves and air the room from time to time while doing it. Pre-try the degreaser on a small spot before using that on a painted or plastic exterior.
3. Measure the pre-cleaned surface of the prospective spot that you are going to treat. We recommend you first make a pattern of an appropriate size on paper and then transfer that to the insulation sheet. This will help you to place everything accurately and avoid wasting the material. Use a stationery knife or construction scissors to trim the desired piece of insulation sheet. Be careful and use gloves for your hand protection.
4. Try to locate the piece of material onto the prospective surface of a car without removing an adhesive paper. Make sure that the material covers it. Now it’s time to remove the release paper. Please do not remove it at once. You need to do it gradually for a better adhesion. Now when your sheet is ready to be used, lay that down to the surface and let it glue. Properly flatten the sheet with hands to avoid air bubbles between the metal and insulation material. Use a roller for rolling down the foil as a next step. You can find a special pattern on the foil that helps to see if it's rolled down properly. You have to roll down the foil till it is plain and smooth, and you cannot see the convex foil texture.
WITH 3 SIZES OF CAR SOUND DEADENING ROLLERS:
Sound Deadening Rollers are made of metal with a corrugated profile of the rotating wheel, which helps to better operate and prevent the drum from slipping. Varied widths of rollers apply to different access and radii. With the large one you can roll longer flat sections for time saving, and get in tight corners such as curves, center console and pillar spots with the small one.
HIGH QUALITY:
The handle of noise deadening roller is made of wood to reduce the chance of hand pain, the rolling wheel and connector is made of metal to improve durability.
APPLICATION SCENARIO:
It can be used on any sound deadening mat, minimize air bubbles, and it also can make tire and tube patches adhere completely during the repairs process.
Package include:
36 sqft of Stage 1 Sound Deadener (9 x sheets at 31.5 inch x 18.1 inch, thickness: 80 mil) and 3 Pcs Roller Metal(Market price:$17.98).
DeliveryPaymentReturn PolicyTermsresponseDelivery
1. We ship items to following 48 States excluded Alaska/Hawaii, APO/FPO, US Protectorates.
2. Orders will be processed and shipped within 24 hours（working day） after your full payment is confirmed by us.
3. To ensure safety, we will ship to PayPal Confirmed addresses only (your credit card billing address must match the shipping address you provide during checkout.) If you would like your item to be shipped to an address other than your billing address, please contact us through , Any non-received items casused by invalid address registered on PayPal are not in our refund or replacement policy.
Notice: We are not responsible for customs, duties or taxes associated with any order, nor will be mark your order as a gift.
Payment
1. Thank you for you interest in our item. As PayPal is our only payment option, please make your payment properly and timely through that.
2. Please kindly notice that a non-payment dispute will be opened automatically if full payment is not received after 4 days of sale.
Return PolicyNO QUESTIONS ASKED! You may return the product within 30 days of receipt. Item must be returned in new condition, as received with all accompanied accessories and literature, including the factory carton. Shipping, handling is not refundable unless item is returned because of defect. If item is found defective return shipping will be refunded to the buyers PayPal account once the item is verified defective. Buyer is responsible for return shipping costs and logistics for all returned items that are not defective. You must contact us within 30 days of receipt, to request an RMA number. Items received without an RMA number, will be refused and returned to the sender.Terms
Buyer assumes all risk of liability with respect to the purchase and use of the product/item.
All of our pictures are photos of actual items. Colors or packaging of items delivered may vary from those photographed
Payment is expected within 7 days of sale close. We cannot guarantee availability of product if we do not receive payment within 7 days.
response
We value your response and suggestions! Please contact us about any problems before leaving us neutral or negative response. We hope we can get a chance to fix the problem.
