45-223 45223 Electric Choke Conversion Kit For Carburetors For Sale - New and Used

45-223 45223 Electric Choke Conversion Kit Replacement for Carburetor Standard Finish (With Internal Vacuum Source)

Product Description

• Cable Included:No
  Emission Code:5
  Grade Type :Performance
  Part Type:Carburetor Choke
  Product Type:Choke Conversion
  Sub Category:Carburetion
  Terminal Type:Blade
  Part Number:45-223
  
  Correct polarity must be observed when connecting the electric choke wires. Connecting the (+) lead to ground and the (-) lead to a 12V source will result in a direct short and could cause a fire. The 12V source selected should be fused. If not, an inline fuse rated at 10 amps should be installed.
  If the choke is not fully open after the engine is warm, poor gas mileage, fast idle speed, and/or engine damage could result.
  
  Note:
  On most applications, your original choke rod will be used. However, on certain carburetors the new choke rod supplied with the kit may have to be used.
  Do not recommend using the 12V side of the coil for your power source.
  
  

  ---