Trucktok 45-223 45223 Electric Choke Conversion Kit With Vacuum Source For Sale - New and Used

Trucktok 45-223 45223 Electric Choke Conversion Kit With Vacuum Source
Product Details

• Publisher: Trucktok
• Publication date: 0

• [OEM Part Number]: 45-223, 45223
• [Function]:Kits can be used to convert carburetors which originally came equipped with manually-operated choke or automatic/electric operated choke.
• [Fitment]:Fits 0-1850, 0-3310, 0-6425, 0-7448 Carburetor
• [Features]:By automatically adjusting the throttle according to the engine temperature, it ensures an appropriate air-fuel mixture ratio during the start-up process, improving cold start performance and engine preheating.Helps improve engine starting performance.
• [Important]: When installing the choke cap, be sure the bi-metal pick-up lever (in the housing) fits into the loop on the bi-metal spring. Check this by turning the choke cap in both directions. The choke plate should open when rotated clockwise, and it should close when rotated counter-clockwise.

Specs:Cable Included:NoCarburetor Choke Type:ElectricCarburetor Mounted:YesCategory:Air and Fuel DeliveryEmission Code:5Grade Type :PerformanceKit:YesPart Type:Carburetor ChokeProduct Type:Choke ConversionSub Category:CarburetionTerminal Type:BladePart Number:45-223Warning:Correct polarity must be observed when connecting the electric choke wires. Connecting the (+) lead to ground and the (-) lead to a 12V source will result in a direct short and could cause a fire. The 12V source selected should be fused. If not, an inline fuse rated at 10 amps should be installed.Connecting the choke cap to the ignition coil will result in unacceptable choke operation. This could cause engine misfiring (resulting in possible engine damage). DO NOT connect the choke wire to the coil!If the choke is not fully open after the engine is warm, poor gas mileage, fast idle speed, and/or engine damage could result.Note:On most applications, your original choke rod will be used. However, on certain carburetors the new choke rod supplied with the kit may have to be used.Do not recommend using the 12V side of the coil for your power source.

---