4X 1.5\" 4x156 to 4x137 Wheel Adapters 10x1.25 For Polaris 4/156 to Can-Am 4/137 For Sale - New and Used

$4X 1.5\$
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

4X 1.5\" 4x156 to 4x137 Wheel Adapters 10x1.25 For Polaris 4/156 to Can-Am 4/137:
$102.98

Note: Adapters does NOT work for Stock/Orginal Rims

Package Includes:

（4）Wheel Thickness: 1.5 inch or 38 mm

Vehicle Bolt Pattern: 4x156 mm

Wheel Bolt Pattern: 4x137 mm (Note: Bolt Pattern Conversion)

Thread Size: 10x1.25

Bolt Shack Length: 27 mm

Torqued Down By Hand At: 45-55 FT/LBS

Hub Bore: 82.5 mm

Number of Pieces: ATVs require different bolt pattern for front & rear.

4X 1.5" 4x156 to 4x137 Wheel Adapters 10x1.25 For Polaris 4/156 to Can-Am 4/137

Note: Adapters does NOT work for Stock/Orginal Rims

Package Includes:

（4）Wheel Thickness: 1.5 inch or 38 mm

Vehicle Bolt Pattern: 4x156 mm

Wheel Bolt Pattern: 4x137 mm (Note: Bolt Pattern Conversion)

Thread Size: 10x1.25

Bolt Shack Length: 27 mm

Torqued Down By Hand At: 45-55 FT/LBS

Hub Bore: 82.5 mm

Number of Pieces: 4

Fitment:

Some ATVs require different bolt pattern for front & rear.

please check the bolt pattern and studs of your ATV before purchase;

ATV must have 10x1.25 threaded wheel studs.

For 2015-2023 Polaris Scrambler 850
For 2014-2023 Polaris Scrambler XP 1000
For 2013-2015 Polaris Scrambler XP 850
For 2010-2014 Polaris Sportsman 550
For 2010-2023 Polaris Sportsman 850
For 2015-2019 Polaris Sportsman SP 850
For 2020-2023 Polaris Sportsman Touring 850
For 2010-2014 Polaris Sportsman X2 550
For 2011 Polaris Sportsman X2 850
For 2015-2023 Polaris Sportsman XP 1000
For 2009 Polaris Sportsman XP 550
For 2009-2014 Polaris Sportsman XP 850
For 1987-2003 Kawasaki Mojave 250
For 1995-2003 Kawasaki Lakota 300
For 1988-2006 Yamaha Blaster 200 Front Only
For 1987-2004 Yamaha Warrior 350 Front Only
For 1987-2006 Yamaha Banshee 350 Front Only
For 2004-2012 Yamaha YFZ450 2WD Front

Concentricity and Dynamic Balance: If used for widening automotive wheels, a high-precision center-hole aligned flange must be selected. Substandard products can easily lead to steering wheel vibration or tire imbalance at high speeds.

Bolt Length Matching: After installing the flange, the original wheel bolts or nuts may become shorter. They must be replaced with matching extended and reinforced wheel bolts; otherwise, there is a serious risk of wheel slippage.

Driving Impact Assessment: Installing wheel track shims will change the vehicle's suspension geometry and stress points, which may result in heavier steering, changes in brake feel, or a slight increase in fuel Steps

After removing the old parts, thoroughly clean the flange contact surfaces, hubs, or pipe edges with a wire brush or sandpaper to remove rust, oil, and impurities.
Place a properly sized gasket between the two flanges. For some pipe installations, apply a thin layer of grease evenly to both sides of the gasket to enhance the seal.
Insert the bolts into the holes sequentially, and pre-tighten all nuts by hand to ensure initial fixation of the components.
The bolts must be tightened gradually in multiple passes, following a diagonal (cross/star) crisscross pattern.
Check the parallelism of both sides of the flanges to ensure uniform style=\"font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-weight: 400; font-size: medium; font-family: "Noto Sans SC";\">Some ATVs require different bolt pattern for front & rear.
please check the bolt pattern and studs of your ATV before purchase;
ATV must have 10x1.25 threaded wheel studs.

Item SpecificsBrand QualitipartsType Wheel AdapterPlace of delivery Ontario,CaliforniaManufacturer Warranty 1 YearSurface Finish CNC Machined Polished Aluminum FinishManufacturer Part Number 13981458Thickness 1.5" or 38mmWheel Bolt Pattern 4x137mmHub Center Bore 82.5mmCentric Lug Centric (No Lip)Torqued Down By Hand At 45-55 FT/LBSNote 2 Only work with 4/137 WheelsBolt Shank Length 27mmLug Patterns 4 LugPerformance Part YesMaterial High Quality t6 6061 Billet AluminumStud Grade 10.9Color SilverThread Pitch 10mm x 1.25 or 10x1.25 or M10x1.25Vehicle Bolt Pattern 4x156mmQuantity 4pcsBolt Pattern 4/156 Convert to 4/137Universal Fitment NoNote 1 Make sure your bolts are 10x1.25Note Adapters does NOT work for Stock/Orginal Rims
About Us:
We are committed to making the best autoparts products and providing you with better services.
So if you have any quesiton or problem, please fell free to contact us about that.
Payment:
Any payments that will be accpeted by are all available.
Shipping:
2-8 working days in transit.
Product will be shipped within 2 business days after full payment is received and verified.
USPS, UPS, FedEx shipping will be provided.
Delivery time is about 2-8 business days to most of addresses.
Returns:
30-day free return is provided.
Any problem for our package / item / or our service, please feel free to contact us, we will solve the problem asap.
Contact Us:
Any quesiton or problem, do contact us please.
We are always online to answer.
Note: Do check the compatible chart before paying the items, or contact us for checking the compatibilities for your vehicles/cars/trucks.

About Us:Payment:Shipping:Returns:Contact Us: Shop CategoryStore Home Wheel Spacers Wheel Hub Bearings Lift Kits Additional ABS Parts Suspension Kits Shocks, Struts & Assemblies Fuel Pump CV Axle Assemblies Alternators Driveshafts Gearbox, Rack & Pinion Parts Air Suspensions Shocks, Struts&Suspension Kits Adj.Height Shocks Door Handle Starter Motors Gasket SetHot Item 2pcs For 1997-2003 Ford F150 2WD Front Upper Control Arm Ball Joint Assembly USD 52.09 Alternator For Acura CL 1998-1999 & Honda Accord 1998-2002 2.3L l4 31100PAA-A01 USD 72.05 Alternator For High Output 105Amp 1-Wire 10SI Self-exciting SBC BBC GM ADR0151 USD 71.97 8pcs For Ford Ranger 1998-2011 Front Upper Control Arms Ball Joints Tie Rods Kit USD 65.59 Alternator for Chevrolet Silverado 1500 2007-2013 4.8L 5.3L 6.0L 6.2L V8 160A USD 98.38 Picture
New List Item For 98-02 Lincoln Navigator Expedition 3X Rear Air Suspension Spring Compressor USD 202.32 For Rock Ride 4PC Air Suspension Bag Spring 3/8\" NPT W21-760-6781 W21-760-6782 USD 149.27 For 2008-2015 BMW 7 Series F01 F02 740 750 760 Li Air Suspension Compressor Pump USD 124.25 For Kia Sorento 2011-2013 Front Struts Rear Shock Absorbers Sway Bars Link Kit USD 202.90 For Cadillac XTS 3.6L 13-19 22936012 22983463 Air Suspension Compressor Assembly USD 167.65 Help & InfoPayment PolicyShipping PolicyReturn PolicyFAQAbout Us 4X 1.5" 4x156 to 4x137 Wheel Adapters 10x1.25 For Polaris 4/156 to Can-Am 4/137
Note: Adapters does NOT work for Stock/Orginal Rims
Package Includes:
（4）Wheel Thickness: 1.5 inch or 38 mm
Vehicle Bolt Pattern: 4x156 mm
Wheel Bolt Pattern: 4x137 mm (Note: Bolt Pattern Conversion)
Thread Size: 10x1.25

Bolt Shack Length: 27 mm
Torqued Down By Hand At: 45-55 FT/LBS

Hub Bore: 82.5 mm
Number of Pieces: 4
Fitment:
Some ATVs require different bolt pattern for front & rear.
please check the bolt pattern and studs of your ATV before purchase;
ATV must have 10x1.25 threaded wheel studs.
For 2015-2023 Polaris Scrambler 850
For 2014-2023 Polaris Scrambler XP 1000
For 2013-2015 Polaris Scrambler XP 850
For 2010-2014 Polaris Sportsman 550
For 2010-2023 Polaris Sportsman 850
For 2015-2019 Polaris Sportsman SP 850
For 2020-2023 Polaris Sportsman Touring 850
For 2010-2014 Polaris Sportsman X2 550
For 2011 Polaris Sportsman X2 850
For 2015-2023 Polaris Sportsman XP 1000
For 2009 Polaris Sportsman XP 550
For 2009-2014 Polaris Sportsman XP 850
For 1987-2003 Kawasaki Mojave 250
For 1995-2003 Kawasaki Lakota 300
For 1988-2006 Yamaha Blaster 200 Front Only
For 1987-2004 Yamaha Warrior 350 Front Only
For 1987-2006 Yamaha Banshee 350 Front Only
For 2004-2012 Yamaha YFZ450 2WD Front
Concentricity and Dynamic Balance: If used for widening automotive wheels, a high-precision center-hole aligned flange must be selected. Substandard products can easily lead to steering wheel vibration or tire imbalance at high speeds.
Bolt Length Matching: After installing the flange, the original wheel bolts or nuts may become shorter. They must be replaced with matching extended and reinforced wheel bolts; otherwise, there is a serious risk of wheel slippage.

After removing the old parts, thoroughly clean the flange contact surfaces, hubs, or pipe edges with a wire brush or sandpaper to remove rust, oil, and impurities.
Place a properly sized gasket between the two flanges. For some pipe installations, apply a thin layer of grease evenly to both sides of the gasket to enhance the seal.
Insert the bolts into the holes sequentially, and pre-tighten all nuts by hand to ensure initial fixation of the components.
The bolts must be tightened gradually in multiple passes, following a diagonal (cross/star) crisscross pattern.

Check the parallelism of both sides of the flanges to ensure uniform style=\"font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-weight: 400; font-size: medium; font-family: "Noto Sans SC";\">Some ATVs require different bolt pattern for front & rear.

please check the bolt pattern and studs of your ATV before purchase;

ATV must have 10x1.25 threaded wheel studs.

Item SpecificsBrand :QualitipartsType :Wheel AdapterPlace of delivery :Ontario,CaliforniaManufacturer Warranty :1 YearSurface Finish :CNC Machined Polished Aluminum FinishManufacturer Part Number :13981458Thickness :1.5" or 38mmWheel Bolt Pattern :4x137mmHub Center Bore :82.5mmCentric :Lug Centric (No Lip)Torqued Down By Hand At :45-55 FT/LBSNote 2 :Only work with 4/137 WheelsBolt Shank Length :27mmLug Patterns :4 LugPerformance Part :YesMaterial :High Quality t6 6061 Billet AluminumStud Grade :10.9Color :SilverThread Pitch :10mm x 1.25 or 10x1.25 or M10x1.25Vehicle Bolt Pattern :4x156mmQuantity :4pcsBolt Pattern :4/156 Convert to 4/137Universal Fitment :NoNote 1 :Make sure your bolts are 10x1.25Note : Adapters does NOT work for Stock/Orginal Rims
About Us:

We are committed to making the best autoparts products and providing you with better services.
So if you have any quesiton or problem, please fell free to contact us about that.

Payment:

Any payments that will be accpeted by are all available.

Shipping:

2-8 working days in transit.
Product will be shipped within 2 business days after full payment is received and verified.
USPS, UPS, FedEx shipping will be provided.
Delivery time is about 2-8 business days to most of addresses.

Returns:

30-day free return is provided.

Any problem for our package / item / or our service, please feel free to contact us, we will solve the problem asap.

Any quesiton or problem, do contact us please.
We are always online to answer.
Note: Do check the compatible chart before paying the items, or contact us for checking the compatibilities for your vehicles/cars/trucks.