Specification:Condition: Brand NewType: Trailer Leaf SpringWarranty: 1 YearFitment Type: Direct FitSpring capacity: 3500 lbsAxle capacity: 7000 lbsLength from center of spring eye to center of spring eye (unloaded): 25-1/4"Free open: 3"Spring width: 1-3/4"Eye diameter with bushing: 9/16"Single leaf thickness: 5/16"Number of leaves: 6Features: Techme17
7000lbs 7k Tandem Trailer Axle Suspension Kit 6 Leaf Springs/U-bolt/Hanger Kit
Specification:
Condition: Brand New
Type: Trailer Leaf Spring
Warranty: 1 Year
Fitment Type: Direct Fit
Spring capacity: 3500 lbs
Axle capacity: 7000 lbs
Length from center of spring eye to center of spring eye (unloaded): 25-1/4"
Free open: 3"
Spring width: 1-3/4"
Eye diameter with bushing: 9/16"
Single leaf thickness: 5/16"
Number of leaves: 6
Features:
Leaf springs are an essential part of the trailer suspension system. The leaf spring provides a connection point for the axle of the trailer, suspending it on the frame of the trailer. Each leaf spring bends to absorb road impacts during driving, allowing the axle to move independently of the rest of the trailer to a certain extent. This helps reduce the wear and tear of the trailer, maintain smooth driving, and ensure horizontal driving on bumpy and uneven surfaces.
The double leaf spring is connected to the hanger welded to the trailer. One end of the spring will be directly connected to the hanger through suspension bolts. The other end will be connected to the release strap suspended on the hanger. These release straps allow the spring to move and rotate so that it can better compensate for uneven road surfaces. If you have a double or triple axle trailer, the release strap will be connected to an equalizer that connects multiple springs.
To install this leaf spring, you need a hanger, a release strap, and suspension bolts. If you only replace the spring, the suspension bracket may still be welded onto your trailer. However, you should replace the release straps as they are usually the first parts to wear out. You can also choose to replace the old suspension bolts. We suggest that you also replace the other leaf spring in the settings. Because the spring will sag and elongate when worn, this new spring may not fully match the old spring and may affect the alignment of the trailer.
If you are manufacturing a trailer, you will need to purchase a hanger kit for installation. To determine the type of hanger kit you need, you must know the specific type of leaf spring you have and your axle capacity. Depending on the hanger kit used with them, springs can be configured for single axis, series, or triaxial applications. If there is no complete kit suitable for your setup, you can also purchase hangers and other suspension components 7000lbs Tandem Trailer Axle
Package Includes:
4 × 3500lbs-6 leaf spring (liner)
2 × Equalizer
2 × Center hanger
4 × Front and rear hangers
8 × 3 "round shaft 7" long 1/2 "diameter U-bolt and matching nut
4 × U-shaped bolt shaft plate
8 × Release buckle strap
14 × Release bolt and locking nut
8 × What material is the steel plate spring made of?
A: 60Si2Mn spring steel, surface thickened spray treatment.
Q: Can we replace only one leaf spring?
A: Of course, but we strongly recommend replacing both leaf springs at the same time, as over time, the leaf springs may sag and elongate. If it means replacing one, it is likely to not match the leaf spring on the other side, which may cause the trailer to lose its horizontal balance and disrupt your layout.
Item SpecificsCountry of Origin United StatesBrand techme17Manufacturer Part Number 632178Part Type Trailer Leaf SpringWarranty 1 YearNumber Of Leaf Springs 6Leaf Spring Width 1-3/4"Eye to Eye Length 25-1/4"Free Open 3"Eye diameter with liner 9/16 "Note Nylon Bushings InstalledSpring capacity 3500 lbsAxle capacity 7000 lbsSingle leaf thickness 5/16"
Payment
We support multiple payment Mastercard.
Shipping
Pickup is not available as all items are shipped to buyers - NO EXCEPTIONS
Orders ARE POSTED BY USPS OR FEDEX.
Returns
If you are unhappy with your purchase for any reason, US buyers can return it to us in an un-used condition in the original packaging within 30 days of purchase and we'll give you a refund or exchange. The refund/Exchange will not include postage/ costs. Please note you MUST contact us to obtain a Return Authorization Number before returning any part. Any parcel without the Return Authorization Number will be rejected.
If your item is faulty or was incorrect, you must contact our sales representative before returning the parcel and we will endeavour to solve the problem effectively. Video or picture is required to show the item condition before we issue the Return Authorization Number.
Important Notice:
1. Any returned item(s) without Return authorization number will be rejected.
2. Please return your item(s) in original packaging and ensure that all packages are securely wrapped.
3. We will not accept responsibility for loss or damage of goods during transit, please ensure that the insurance cover option is taken where possible.
response
If you have purchased the wrong Good or are returning a Good as a warranty claim, we will accept a return of that good and issue refund or send out a replacement Good subject to the following:you must contact us first about the Goods before returning the Goods to us, and if we agree to accept a return of the incorrectly purchased Good or if we agree to accept the warranty claim over the Good then you MUST do the following:the Goods must be securely and appropriately packed so they are not damaged during transit;the Goods must be returned in their original packaging;the Goods must be like new and not show any signs of use or having been installed or fitted;The claim for refund must be advised to us no later than 30 days after the date you bought the Good.
About Us
● High Quality
● Customer - Service
● Affordable Prices
Techme17
DescriptionPaymentShippingReturn policyContact us Hot Item 3 Sets For Dodge Ram 6.7L Diesel Fuel Filter Kit 2013-2018 2500 3500 4500 5500 USD 33.22 Ls Oil Pan Kit Engine Low Profile 302-2 Rear Fit for LS1 LS2 LS3 LSX 6.0L 5.3L USD 101.77 For Volkswagen Jetta 2005-2016 Passat Radiator 2006-2018 Cooling Dual Fan USD 79.66 For 1999-2007 Chevy Silverado/GMC 1500 2500 3500 Mass Air Flow Sensor Meter MAF USD 22.18 2\" Drop Lowering Spindles Kit For 99-06 Chevy Silverado GMC Sierra 1500 AWD 2WD USD 107.50 New List Item Power Window Regulator w/ Motor For Buick LaCrosse 2005-2009 Bolt On Rear Driver USD 36.49 For Buick Verano 2012-2017 2.4L l4 18-B5471A Rear Left Brake Caliper w/ Bracket USD 57.15 Front Driver Power Window Regulator W/ Motor For Toyota RAV4 1998-2000 Bolt-On USD 29.23 Rear Passenger Power Window Regulator & Motor For Chevy Malibu 1997-2003 Bolt-On USD 28.96 Rear LH RH 2× Power Window Regulator w/ Motor For Lincoln Town Car 98-11 4.6L V8 USD 40.13 7000lbs 7k Tandem Trailer Axle Suspension Kit 6 Leaf Springs/U-bolt/Hanger Kit
Specification:
Condition: Brand New
Type: Trailer Leaf Spring
Warranty: 1 Year
Fitment Type: Direct Fit
Spring capacity: 3500 lbs
Axle capacity: 7000 lbs
Length from center of spring eye to center of spring eye (unloaded): 25-1/4"
Free open: 3"
Spring width: 1-3/4"
Eye diameter with bushing: 9/16"
Single leaf thickness: 5/16"
Number of leaves: 6
Features:
Leaf springs are an essential part of the trailer suspension system. The leaf spring provides a connection point for the axle of the trailer, suspending it on the frame of the trailer. Each leaf spring bends to absorb road impacts during driving, allowing the axle to move independently of the rest of the trailer to a certain extent. This helps reduce the wear and tear of the trailer, maintain smooth driving, and ensure horizontal driving on bumpy and uneven surfaces.
The double leaf spring is connected to the hanger welded to the trailer. One end of the spring will be directly connected to the hanger through suspension bolts. The other end will be connected to the release strap suspended on the hanger. These release straps allow the spring to move and rotate so that it can better compensate for uneven road surfaces. If you have a double or triple axle trailer, the release strap will be connected to an equalizer that connects multiple springs.
To install this leaf spring, you need a hanger, a release strap, and suspension bolts. If you only replace the spring, the suspension bracket may still be welded onto your trailer. However, you should replace the release straps as they are usually the first parts to wear out. You can also choose to replace the old suspension bolts. We suggest that you also replace the other leaf spring in the settings. Because the spring will sag and elongate when worn, this new spring may not fully match the old spring and may affect the alignment of the trailer.
If you are manufacturing a trailer, you will need to purchase a hanger kit for installation. To determine the type of hanger kit you need, you must know the specific type of leaf spring you have and your axle capacity. Depending on the hanger kit used with them, springs can be configured for single axis, series, or triaxial applications. If there is no complete kit suitable for your setup, you can also purchase hangers and other suspension components 7000lbs Tandem Trailer Axle
Package Includes:
4 × 3500lbs-6 leaf spring (liner)
2 × Equalizer
2 × Center hanger
4 × Front and rear hangers
8 × 3 "round shaft 7" long 1/2 "diameter U-bolt and matching nut
4 × U-shaped bolt shaft plate
8 × Release buckle strap
14 × Release bolt and locking nut
8 × What material is the steel plate spring made of?
A: 60Si2Mn spring steel, surface thickened spray treatment.
Q: Can we replace only one leaf spring?
A: Of course, but we strongly recommend replacing both leaf springs at the same time, as over time, the leaf springs may sag and elongate. If it means replacing one, it is likely to not match the leaf spring on the other side, which may cause the trailer to lose its horizontal balance and disrupt your layout.
Payment
We support multiple payment Mastercard.
Shipping
Pickup is not available as all items are shipped to buyers - NO EXCEPTIONS
Orders ARE POSTED BY USPS OR FEDEX.
Returns
If you are unhappy with your purchase for any reason, US buyers can return it to us in an un-used condition in the original packaging within 30 days of purchase and we'll give you a refund or exchange. The refund/Exchange will not include postage/ costs. Please note you MUST contact us to obtain a Return Authorization Number before returning any part. Any parcel without the Return Authorization Number will be rejected.
If your item is faulty or was incorrect, you must contact our sales representative before returning the parcel and we will endeavour to solve the problem effectively. Video or picture is required to show the item condition before we issue the Return Authorization Number.
Important Notice:
1. Any returned item(s) without Return authorization number will be rejected.
2. Please return your item(s) in original packaging and ensure that all packages are securely wrapped.
3. We will not accept responsibility for loss or damage of goods during transit, please ensure that the insurance cover option is taken where possible.
response
If you have purchased the wrong Good or are returning a Good as a warranty claim, we will accept a return of that good and issue refund or send out a replacement Good subject to the following:you must contact us first about the Goods before returning the Goods to us, and if we agree to accept a return of the incorrectly purchased Good or if we agree to accept the warranty claim over the Good then you MUST do the following:the Goods must be securely and appropriately packed so they are not damaged during transit;the Goods must be returned in their original packaging;the Goods must be like new and not show any signs of use or having been installed or fitted;The claim for refund must be advised to us no later than 30 days after the date you bought the Good.
About Us
● High Quality
● Customer - Service
● Affordable Prices
All rights reserved.
On Aug 24, 2026 at 05:36:29 PDT, seller added the following information:
