1.Fit ForBuick Century 1978-1981Buick Regal 1978-1987Chevrolet El Camino 1978-1987Chevrolet Malibu 1978-1983Chevrolet Monte Carlo 1978-1988GMC Caballero 1978-1987Oldsmobile Cutlass Cruiser 1980-1983Oldsmobile Cutlass Supreme 1982-1988Pontiac Bonneville 1982-1986Pontiac Grand Prix 1978-1987Pontiac LeMans 1978-19812.Package Includes:2x Part# Front Inner Tie Rods - ES2033RLT2x Part# Front Outer Tie Rods - ES2034RLT1x Part# Center Link - DS9092x Part# Front Sway Bars Links - K52542x Part# Adjusting Sleeves - ES2032S1x Part# Idler Arm - K6187TNotes ECCPP 10pcs for 1978-1986 1987 Buick Century Regal Complete Front Suspension Kit
1.Fit For
Buick Century 1978-1981
Buick Regal 1978-1987
Chevrolet El Camino 1978-1987
Chevrolet Malibu 1978-1983
Chevrolet Monte Carlo 1978-1988
GMC Caballero 1978-1987
Oldsmobile Cutlass Cruiser 1980-1983
Oldsmobile Cutlass Supreme 1982-1988
Pontiac Bonneville 1982-1986
Pontiac Grand Prix 1978-1987
Pontiac LeMans 1978-1981
2.Package Includes:
2x Part# Front Inner Tie Rods - ES2033RLT
2x Part# Front Outer Tie Rods - ES2034RLT
1x Part# Center Link - DS909
2x Part# Front Sway Bars Links - K5254
2x Part# Adjusting Sleeves - ES2032S
1x Part# Idler Arm - K6187T
Notes
(1).Please check the fitment chart above before payment makingsure all the suspension parts listed on this page are compatible with your automobile.
(2).Please refer to Moog official website before narrowing down your search so as to avoid unnecessary item not as described return requests.
(3).Please contact our customer services for targeted discount after all the items are received if you have reached any targeted discount thresholds, the terms of which is atthe bottom of thispage.
If you are interested with anyothersuspension parts, please click and saveour store.
Ball JointReplacement Guideline:
If there is a knocking or clunking noise in the area of the front axle when the car is traveling over road bumps, potholes or curbs, then there is usually a defect in a component of the wheel side of the front axle from which the (vibration) noise is emanating can already be determined during a test drive. The type of noise also already provides certain indications for maintenance regarding which components might be />1.Raise the vehicle and remove the front wheels.
2.To loosen the fastening screws and fixing nuts of the compression ball joint more easily, spray them with rust remover and allow to act for a few minutes.
Picture(C)
3.Loosen the fastening screws of the broken ball joint on the control arm and remove the nuts.
Picture(D)
4.Loosen and remove the fixing nut of the ball joint on the steering knuckle.
Tip:If the ball stud rotates, hold the ball stud in place with a hexagon socket.
Picture(E)
5.Remove the bad or worn ball joint from the control arm.
6.Loosen the compression ball joint on the steering knuckle using a suitable special tool.
Picture(F)
7.Clean the cone connection.
Tip:For better sealing and durability of the ball joint sleeve, a little silicone grease can be applied to the contact surface.
Picture(G)
8.Insert new compression ball joint in the control arm and steering knuckle and tighten with new fixing nuts.
9.Reinstall front wheels. Lower the vehicle and tighten the wheel studs to the tightening torque specified by the vehicle manufacturer.
10.Measure the chassis and adjust it using the various holes on the compression ball joint if necessary.
11.Finally, carry out a test drive.
Sway Bar Stabilizer Link Replacement Guideline:
While driving, the following signs may indicate a faulty sway barstabilizer link:
(1).Rattling and thumping noises on rough roads.
(2).Imprecise vehicle handling.
(3).Stronger inclination of the vehicle during cornering.
If the sway bar stabilizer link is found to be defective, it should be replaced as described below.
Picture(A)
1.Raise vehicle and remove front wheels.
Tip:Always check both stabilizer links and replace them in pairs if necessary.
2.Spray fastening nuts of the stabilizer link with rust remover and let act for a few the lower fastening nut of the stabilizer link at the stabilizer and remove.
Tip:If the ball stud also starts to turn, hold it with a suitable tool.
4.Press stabilizer link out of torsion the upper fastening nut of the stabilizer link at the suspension strut and remove it.
Tip:If the ball stud also starts to turn, hold it with a suitable stabilizer link at suspension strut out of new stabilizer link at suspension stabilizer link at suspension strut to the tightening torque specified by the vehicle manufacturer.
Tip:Secure the ball stud against twisting with a suitable new stabilizer link at stabilizer.
10.Tighten stabilizer link at stabilizer to the tightening torque specified by the vehicle manufacturer.
Tip:Secure the ball stud against twisting with a suitable the front wheels. Lower the vehicle and tighten the wheel studs to the tightening torque specified by the vehicle manufacturer.
Tip:Even if replacing the stabilizer link does not directly affect the chassis setting, we recommend checking the axle setting and adjusting if necessary after working on the suspension.
12.Conclude with a test drive.
Tie-Rod End Replacement Guideline:
If you feel a bump in the steering when driving over road bumps or curbs, this might be due to worn tie rod ends or inner tie rods. Clicking noises during sudden steering movements can also be symptoms of a defective tie rod. In order to determine the exact cause and replace the defective tie rod, the car must be elevated with a vehicle lift in order to be examined more closely.
This useful tip applies to the exchange of tie rod ends and inner tie rods, which together form the so-called tie rod.
Picture(A)
Note: Cleanliness is extremely important when working on the po
Item SpecificsPlacement on Vehicle FrontType Sway Bar LinkUniversal Fitment NoItems Included Mounting HardwareCustom Bundle YesInterchange Part Number DS909 K5254 ES2032S K6187TOE/OEM Part Number Suspension Steering Tie Rod Ends Linkages Assembly,Sway Bars EndsSuperseded Part Number Front Driver and Passenger Side ReplacementManufacturer Warranty 10 YearBrand ECCPPManufacturer Part Number E81013602CPAdjustable YesGreasable or Sealed GreasableKit Included Surface Finish Premium QualityKit Included 10 PiecesCross Reference Part Number ES2033RLT ES2034RLTCross Part Number For Buick , GMC Envoy, Pontiac, OldsmobilePartlink Number 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987Bundle Description Center Link ,Sway Bar,Tie Rod End(Adjusting Sleeve),Idler ArmFeatures GreasableFinish CoatedMaterial Alloy SteelMounting Style Bolt-On Item SpecificsPlacement on Vehicle FrontType Sway Bar LinkUniversal Fitment NoItems Included Mounting HardwareCustom Bundle YesInterchange Part Number DS909 K5254 ES2032S K6187TOE/OEM Part Number Suspension Steering Tie Rod Ends Linkages Assembly,Sway Bars EndsSuperseded Part Number Front Driver and Passenger Side ReplacementManufacturer Warranty 10 YearBrand ECCPPManufacturer Part Number E81013602CPAdjustable YesGreasable or Sealed GreasableKit Included Surface Finish Premium QualityKit Included 10 PiecesCross Reference Part Number ES2033RLT ES2034RLTCross Part Number For Buick , GMC Envoy, Pontiac, OldsmobilePartlink Number 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987Bundle Description Center Link ,Sway Bar,Tie Rod End(Adjusting Sleeve),Idler ArmFeatures GreasableFinish CoatedMaterial Alloy SteelMounting Style Bolt-On
Discount
Targeted Disounts Terms
(1).Targeted Discount Terms only apply to auto parts purchased from ECCPPAUTOPARTS, which only includes suspension kit, control arm, tie rod end, ball joint, sway bar, stabilizer link, pitman arm, idler arm, steering center link.
(2).If you have reached any targeted discount threshold(s), please contact our customer services after you received all your items.
(3).Targeted Discount will be refunded from buyer's payment, which means ECCPPAUTOPARTS won't provide any extra targeted discounts if full refund is issued.
Targeted Shipping Discount
(4).Since our warehouse is located in Los Angeles, California, therefore you are qualified for extra 2% targeted shipping discount off the item sales if shipping address of your order is in California(CA), Washington(WA), Oregon(OR), Nevada(NV). If you have reached this targeted shipping discount threshold, please contact our customer services after you received all your items.
Note: Item sales means your payment for the product(s) only, excluding shipping and handling charges, US internet sales taxes.
(5).We usually need a 1-2business day as handling time for packaging and shipping scheduling. Estimated delivery dates should be 4-6business days after your payment is received.
(6).ECCPPAUTOPARTS has the final power of interpretation of all the above Targeted Discount Terms and Procedures.
Shipping
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm.
(1).Warehouse is located in Los Angeles, California, where local pickup transaction is temporarily not available.
(2).Shipping services only cover 48 states and Washington DC in US Continental, while most of the time Alaska, Hawaii, Puerto Rico, American Samoa, U.S. Virgin Islands, Northern Marianas, Guam are not deliverable.
(3).USPS PO Box, APO Army Post Office, FPO Fleet Post Office addresses are not available.
(4).Global Shipping Program is temporarily not available due to the reason for package dimensions.
(5).We usually need a 1-2business day as handling time for packaging and shipping scheduling. Estimated delivery dates should be 4-6business days after your payment is received.
(6).Your auto parts sometimes might be shipped with two or more separated packages due to weight limitation, please keep patient with no Item Not Received claim or Return request filed until by all of your items are received.
(7).Seller is required to purchase signature confirmation to be protected if a buyer reports an item not received or opens a payment dispute if the order has a total cost (including shipping costs and any taxes) of $750 or more.
Warranty
Items valued over $15 on that include a warranty or service contract must contain additional details in seller's listing description.
10 Year Warranty Terms and Procedures
(1).The warranty terms only apply to the auto parts purchased from ECCPPAUTOPARTS, which only includes suspension kit, control arm, tie rod end, ball joint, sway bar, stabilizer link, pitman arm, idler arm, steering center link.
(2).ECCPPAUTOPARTS carries no warranty responsibilities for any auto parts removing fees, installation fees, consulting fees, labor costs, towing charges, rental car reimbursements.
(3).The stated 10 year warranty is limited to only one brand new replacement for each part purchased during 10 year warranty time period.
(4).ECCPPAUTOPARTS promises free replacement due to quality defects or item not as described issues within 90 calendar days from the date when buyers receive their items in the situation when buyers are willing to provide convictive proofs or professional diagnose report if required, otherwise ECCPPAUTOPARTS has the right to refuse any replacement requests.
(5).ECCPPAUTOPARTS promises free replacement due to quality defects or item not as described issues after 90 calendar days from the date when buyers receive their items in the situation when buyers promise to prepay 15% of the original item sales price as postage for replacement, otherwise ECCPPAUTOPARTS has the right to refuse any replacement requests.
(6).ECCPPAUTOPARTS carries no warranty responsibilities for any replacement due to car accidents, drag racing, unprofessional replacement, road hazard, disassembly.
(7).Anyone who attempts to execute 10 year warranty procedures must be the original purchaser of the item(s), otherwise 10 year warranty terms void immediately.
(8).Anyone who attempts to execute 10 year warranty procedures must provide screenshot of his or her original order details if required, including buyer user name, shipping address, item title, item id, final sales price.
(9).ECCPPAUTOPARTS has the final power of interpretation of the above 10 Year Warranty Terms and Procedures.
Return
(1).Most of items support 60 Days Money Back Guarantee.
(2).Refunds will be credited within 2 or 3 business days after returned item(s) is received.
Best Sales 12V Universal Low Pressure 5-9 PSI Electric Fuel Pump Installation Kit E8012S USD 14.99 Pair Front Or Rear Wheel Hub Bearing For Chevy Impala Pontiac Grand Prix Venture USD 62.69 2x For 1999 2000 2001 2002 2003 2004 2005 2006 2007 Ford F150 Remote Car Key Fob USD 13.79 Front Or Rear Wheel Bearing Hub For Buick Rendezvous Lesabre Chevrolet Impala USD 42.62 For 1988-98 Chevy GMC 1500/2500/3500 Towing Manual Side View Mirrors Truck Pair USD 75.99 Newly Listed New Aluminum Radiator Fits CU1907 For 1997-2002 Mitsubishi Mirage 1.5L 1.8L L4 USD 86.99 ECCPP Oil Pressure Sensor Fit For Honda Pilot SE-L Sport Utility 4-Door USD 14.99 Front Complete Struts & Tie Rod End For 02-09 Rainier Trailblazer Envoy Ascender USD 176.25 ECCPP For 2005-2009 PONTIAC G6 LH & RH Side Black Foldaway Power Mirrors USD 68.99 ECCPP For 1997-07 Volkswagen Golf IV Jetta Manual Fold Power LH+RH Side Mirrors USD 86.99 ECCPP 10pcs for 1978-1986 1987 Buick Century Regal Complete Front Suspension Kit
1.Fit For
Buick Century 1978-1981
Buick Regal 1978-1987
Chevrolet El Camino 1978-1987
Chevrolet Malibu 1978-1983
Chevrolet Monte Carlo 1978-1988
GMC Caballero 1978-1987
Oldsmobile Cutlass Cruiser 1980-1983
Oldsmobile Cutlass Supreme 1982-1988
Pontiac Bonneville 1982-1986
Pontiac Grand Prix 1978-1987
Pontiac LeMans 1978-1981
2.Package Includes:
2x Part# Front Inner Tie Rods - ES2033RLT
2x Part# Front Outer Tie Rods - ES2034RLT
1x Part# Center Link - DS909
2x Part# Front Sway Bars Links - K5254
2x Part# Adjusting Sleeves - ES2032S
1x Part# Idler Arm - K6187T
Notes
(1).Please check the fitment chart above before payment makingsure all the suspension parts listed on this page are compatible with your automobile.
(2).Please refer to Moog official website before narrowing down your search so as to avoid unnecessary item not as described return requests.
(3).Please contact our customer services for targeted discount after all the items are received if you have reached any targeted discount thresholds, the terms of which is atthe bottom of thispage.
If you are interested with anyothersuspension parts, please click and saveour store.
Ball JointReplacement Guideline:
If there is a knocking or clunking noise in the area of the front axle when the car is traveling over road bumps, potholes or curbs, then there is usually a defect in a component of the wheel side of the front axle from which the (vibration) noise is emanating can already be determined during a test drive. The type of noise also already provides certain indications for maintenance regarding which components might be />1.Raise the vehicle and remove the front wheels.
2.To loosen the fastening screws and fixing nuts of the compression ball joint more easily, spray them with rust remover and allow to act for a few minutes.
Picture(C)
3.Loosen the fastening screws of the broken ball joint on the control arm and remove the nuts.
Picture(D)
4.Loosen and remove the fixing nut of the ball joint on the steering knuckle.
Tip:If the ball stud rotates, hold the ball stud in place with a hexagon socket.
Picture(E)
5.Remove the bad or worn ball joint from the control arm.
6.Loosen the compression ball joint on the steering knuckle using a suitable special tool.
Picture(F)
7.Clean the cone connection.
Tip:For better sealing and durability of the ball joint sleeve, a little silicone grease can be applied to the contact surface.
Picture(G)
8.Insert new compression ball joint in the control arm and steering knuckle and tighten with new fixing nuts.
9.Reinstall front wheels. Lower the vehicle and tighten the wheel studs to the tightening torque specified by the vehicle manufacturer.
10.Measure the chassis and adjust it using the various holes on the compression ball joint if necessary.
11.Finally, carry out a test drive.
Sway Bar Stabilizer Link Replacement Guideline:
While driving, the following signs may indicate a faulty sway barstabilizer link:
(1).Rattling and thumping noises on rough roads.
(2).Imprecise vehicle handling.
(3).Stronger inclination of the vehicle during cornering.
If the sway bar stabilizer link is found to be defective, it should be replaced as described below.
Picture(A)
1.Raise vehicle and remove front wheels.
Tip:Always check both stabilizer links and replace them in pairs if necessary.
2.Spray fastening nuts of the stabilizer link with rust remover and let act for a few the lower fastening nut of the stabilizer link at the stabilizer and remove.
Tip:If the ball stud also starts to turn, hold it with a suitable tool.
4.Press stabilizer link out of torsion the upper fastening nut of the stabilizer link at the suspension strut and remove it.
Tip:If the ball stud also starts to turn, hold it with a suitable stabilizer link at suspension strut out of new stabilizer link at suspension stabilizer link at suspension strut to the tightening torque specified by the vehicle manufacturer.
Tip:Secure the ball stud against twisting with a suitable new stabilizer link at stabilizer.
10.Tighten stabilizer link at stabilizer to the tightening torque specified by the vehicle manufacturer.
Tip:Secure the ball stud against twisting with a suitable the front wheels. Lower the vehicle and tighten the wheel studs to the tightening torque specified by the vehicle manufacturer.
Tip:Even if replacing the stabilizer link does not directly affect the chassis setting, we recommend checking the axle setting and adjusting if necessary after working on the suspension.
12.Conclude with a test drive.
Tie-Rod End Replacement Guideline:
If you feel a bump in the steering when driving over road bumps or curbs, this might be due to worn tie rod ends or inner tie rods. Clicking noises during sudden steering movements can also be symptoms of a defective tie rod. In order to determine the exact cause and replace the defective tie rod, the car must be elevated with a vehicle lift in order to be examined more closely.
This useful tip applies to the exchange of tie rod ends and inner tie rods, which together form the so-called tie rod.
Picture(A)
Note: Cleanliness is extremely important when working on the po
Item SpecificsPlacement on Vehicle :FrontType :Sway Bar LinkUniversal Fitment :NoItems Included :Mounting HardwareCustom Bundle :YesInterchange Part Number :DS909 K5254 ES2032S K6187TOE/OEM Part Number :Suspension Steering Tie Rod Ends Linkages Assembly,Sway Bars EndsSuperseded Part Number :Front Driver and Passenger Side ReplacementManufacturer Warranty :10 YearBrand :ECCPPManufacturer Part Number :E81013602CPAdjustable :YesGreasable or Sealed :GreasableKit Included :Surface Finish :Premium QualityKit Included :10 PiecesCross Reference Part Number :ES2033RLT ES2034RLTCross Part Number :For Buick , GMC Envoy, Pontiac, OldsmobilePartlink Number :1978 1979 1980 1981 1982 1983 1984 1985 1986 1987Bundle Description :Center Link ,Sway Bar,Tie Rod End(Adjusting Sleeve),Idler ArmFeatures :GreasableFinish :CoatedMaterial :Alloy SteelMounting Style :Bolt-On Item SpecificsPlacement on Vehicle FrontType Sway Bar LinkUniversal Fitment NoItems Included Mounting HardwareCustom Bundle YesInterchange Part Number DS909 K5254 ES2032S K6187TOE/OEM Part Number Suspension Steering Tie Rod Ends Linkages Assembly,Sway Bars EndsSuperseded Part Number Front Driver and Passenger Side ReplacementManufacturer Warranty 10 YearBrand ECCPPManufacturer Part Number E81013602CPAdjustable YesGreasable or Sealed GreasableKit Included Surface Finish Premium QualityKit Included 10 PiecesCross Reference Part Number ES2033RLT ES2034RLTCross Part Number For Buick , GMC Envoy, Pontiac, OldsmobilePartlink Number 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987Bundle Description Center Link ,Sway Bar,Tie Rod End(Adjusting Sleeve),Idler ArmFeatures GreasableFinish CoatedMaterial Alloy SteelMounting Style Bolt-On
DiscountShippingWarrantyReturnresponse
Targeted Disounts Terms
(1).Targeted Discount Terms only apply to auto parts purchased from ECCPPAUTOPARTS, which only includes suspension kit, control arm, tie rod end, ball joint, sway bar, stabilizer link, pitman arm, idler arm, steering center link.
(2).If you have reached any targeted discount threshold(s), please contact our customer services after you received all your items.
(3).Targeted Discount will be refunded from buyer's payment, which means ECCPPAUTOPARTS won't provide any extra targeted discounts if full refund is issued.
Targeted Shipping Discount
(4).Since our warehouse is located in Los Angeles, California, therefore you are qualified for extra 2% targeted shipping discount off the item sales if shipping address of your order is in California(CA), Washington(WA), Oregon(OR), Nevada(NV). If you have reached this targeted shipping discount threshold, please contact our customer services after you received all your items.
Note: Item sales means your payment for the product(s) only, excluding shipping and handling charges, US internet sales taxes.
(5).We usually need a 1-2business day as handling time for packaging and shipping scheduling. Estimated delivery dates should be 4-6business days after your payment is received.
(6).ECCPPAUTOPARTS has the final power of interpretation of all the above Targeted Discount Terms and Procedures.
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm.
(1).Warehouse is located in Los Angeles, California, where local pickup transaction is temporarily not available.
(2).Shipping services only cover 48 states and Washington DC in US Continental, while most of the time Alaska, Hawaii, Puerto Rico, American Samoa, U.S. Virgin Islands, Northern Marianas, Guam are not deliverable.
(3).USPS PO Box, APO Army Post Office, FPO Fleet Post Office addresses are not available.
(4).Global Shipping Program is temporarily not available due to the reason for package dimensions.
(5).We usually need a 1-2business day as handling time for packaging and shipping scheduling. Estimated delivery dates should be 4-6business days after your payment is received.
(6).Your auto parts sometimes might be shipped with two or more separated packages due to weight limitation, please keep patient with no Item Not Received claim or Return request filed until by all of your items are received.
(7).Seller is required to purchase signature confirmation to be protected if a buyer reports an item not received or opens a payment dispute if the order has a total cost (including shipping costs and any taxes) of $750 or more.
Items valued over $15 on that include a warranty or service contract must contain additional details in seller's listing description.
10 Year Warranty Terms and Procedures
(1).The warranty terms only apply to the auto parts purchased from ECCPPAUTOPARTS, which only includes suspension kit, control arm, tie rod end, ball joint, sway bar, stabilizer link, pitman arm, idler arm, steering center link.
(2).ECCPPAUTOPARTS carries no warranty responsibilities for any auto parts removing fees, installation fees, consulting fees, labor costs, towing charges, rental car reimbursements.
(3).The stated 10 year warranty is limited to only one brand new replacement for each part purchased during 10 year warranty time period.
(4).ECCPPAUTOPARTS promises free replacement due to quality defects or item not as described issues within 90 calendar days from the date when buyers receive their items in the situation when buyers are willing to provide convictive proofs or professional diagnose report if required, otherwise ECCPPAUTOPARTS has the right to refuse any replacement requests.
(5).ECCPPAUTOPARTS promises free replacement due to quality defects or item not as described issues after 90 calendar days from the date when buyers receive their items in the situation when buyers promise to prepay 15% of the original item sales price as postage for replacement, otherwise ECCPPAUTOPARTS has the right to refuse any replacement requests.
(6).ECCPPAUTOPARTS carries no warranty responsibilities for any replacement due to car accidents, drag racing, unprofessional replacement, road hazard, disassembly.
(7).Anyone who attempts to execute 10 year warranty procedures must be the original purchaser of the item(s), otherwise 10 year warranty terms void immediately.
(8).Anyone who attempts to execute 10 year warranty procedures must provide screenshot of his or her original order details if required, including buyer user name, shipping address, item title, item id, final sales price.
(9).ECCPPAUTOPARTS has the final power of interpretation of the above 10 Year Warranty Terms and Procedures.
(1).Most of items support 60 Days Money Back Guarantee.
(2).Refunds will be credited within 2 or 3 business days after returned item(s) is received.
Copyright of ECCPP. All rights reserved.
