Hellwig 7708 Front Sway Bar for 2009-2018 Dodge/Ram 1500 2WD Stock Height For Sale - New and Used

- AUTHORIZED DEALER
- AUTHENTICPART

Part Brand: Hellwig

Part Number: 7708

Vehicle Fitment

• 2009–2010 Dodge Ram 1500 (All Trims, 2WD, 3.7L V6 / 4.7L V8 / 5.7L V8, Stock Height)
• 2011–2018 Ram 1500 (All Trims, 2WD, 3.6L V6 / 3.7L V6 / 4.7L V8 / 5.7L V8 / 3.0L V6 EcoDiesel, Stock Height)
• 2019 Ram 1500 Classic (2WD, Stock Height)

Fitment Notes

• Fits 2WD configurations only — does not fit 4WD Ram 1500 models under any circumstances.
• For stock ride height vehicles only — does not fit Ram 1500 models with any front lowering kit installed.
• Reuses factory front end links — end links are not included and must be retained from the original vehicle.
• The 3.0L V6 EcoDiesel engine was available in Ram 1500 models from 2014–2018.
• The 3.7L V6 was offered in 2009–2012 model years only; the 3.6L V6 replaced it beginning in 2013.
• The 4.7L V8 was available in 2009–2013 model years only.
• Designed for use with the factory exhaust system.
• Hellwig recommends pairing with the Hellwig 7709 rear sway bar for a complete front-to-rear handling upgrade on this platform.

Features

• Purpose-built front sway bar engineered specifically for the 2009–2018 Ram 1500 2WD, replacing the factory bar with a significantly larger-diameter chromoly unit for improved front roll resistance.
• 1-1/2\" diameter solid, heat-treated 4140 chromoly spring steel — a meaningful upgrade over the factory bar for improved lateral stiffness and reduced front body lean during cornering.
• Reduces front-end body roll and understeer, keeping weight more evenly distributed across all four tires for improved traction, stability, and driver confidence.
• Effective for everyday driving, commuting, towing, and hauling — improves front-end response whether unloaded or under load.
• Reuses factory front end links for a clean, OEM-integrated installation with no aftermarket link hardware required.
• High-durometer polyurethane bushings included for superior roll resistance, reduced noise and vibration, and longer service life than rubber.
• Black hammertone powdercoated finish for a distinctive, aggressive appearance with long-term corrosion resistance.
• Heat-formed as a single piece from 4140 chromoly steel — more structurally consistent at the bends than cold-bent aftermarket alternatives.
• Quick bolt-on installation using factory mounting locations — all mounting hardware included.
• ISO 9001:2015 certified manufacturing at Hellwig\'s Visalia, California facility. Made in the USA. Backed by a Limited Lifetime Warranty.

Specifications

• Part Number: 7708
• Bar Diameter: 1-1/2\" (1.500 in. / 38.10mm)
• Bar Material: Solid, heat-treated 4140 chromoly spring steel
• Finish: Black Hammertone Powdercoated
• Position: Front
• Rate Type: Fixed (non-adjustable)
• Drivetrain: 2WD only
• Ride Height: Stock height only — not compatible with lowered applications
• End Links: Reuses factory end links (not included)
• Shipping Weight: 36 lbs.
• Shipping Dimensions: 54 in. L x 21 in. W x 2 in. H
• UPC: 745662077082
• Warranty: Limited Lifetime

Included Components

• 1x Hellwig 7708 Front Sway Bar (1-1/2\" diameter, chromoly, black hammertone powdercoated)
• 1x Set of high-durometer polyurethane bushings
• 1x Complete mounting hardware kit
• 1x Installation instruction sheet

Product Description

The Hellwig 7708 Front Sway Bar is a direct-fit handling upgrade engineered for the 2009–2018 Ram 1500 in 2WD configuration at stock ride height. The factory front sway bar on these trucks is engineered to balance ride comfort with general handling capability, but falls short when push comes to shove on the highway — particularly during lane changes, towing maneuvers, and loaded cornering situations. The Hellwig 7708 replaces the factory unit with a solid 1-1/2\" heat-treated 4140 chromoly bar, delivering a meaningful step up in front lateral stiffness. Drivers will notice reduced front body lean in corners, less understeer under load, and a more planted, predictable front-end feel from the first drive. The distinctive black hammertone powdercoat finish also gives the undercarriage a cleaner, more purposeful appearance compared to the factory unit.

The 7708 is engineered to retain the factory front end links, making installation clean and straightforward. High-durometer polyurethane bushings are included and provide superior roll resistance and reduced NVH compared to the factory rubber units. All mounting hardware is included and the installation uses the factory bracket mounting points — no drilling or fabrication required. One important restriction: this bar is designed for stock ride height only. Ram 1500 models with any front lowering kit installed are not compatible, as confirmed directly by Hellwig technical support. It is also a 2WD-exclusive application and will not fit 4WD variants.

Fitment covers the complete 2009–2018 Ram 1500 DS/DT-platform lineup in 2WD across all trim levels and all available engine options — including the 3.7L V6 (2009–2012), 4.7L V8 (2009–2013), 3.6L V6 (2013–2018), 5.7L HEMI V8 (2009–2018), and 3.0L EcoDiesel V6 (2014–2018) — as well as the 2019 Ram 1500 Classic carryover in 2WD. Built at Hellwig\'s ISO 9001:2015 certified Visalia, California facility and backed by a Limited Lifetime Warranty, the 7708 pairs perfectly with the Hellwig 7709 rear sway bar for a full front-to-rear handling transformation on the Ram 1500 platform.

*Parts are for USA spec vehicles, please contact us to verify fitment on JDM & international models.

· · · SHIPPING · · ·

• Free shipping across the contiguous 48 United States (excludes Hawaii and Alaska). Item(s) ships on the same day or within 1 business day. Delivery time is within 2 to 4 business days excluding next day deliveries. Orders over $750 require signature for delivery.
• Canada customers - If does not collect import & duty fees during checkout, the shipping carrier will collect them prior to delivery.

· · · RETURNS · · ·

• Your complete shopping satisfaction is our #1 priority. If an item you ordered from us does not meet your expectations, please contact us within 30 days of receiving the item(s). If your order arrives damaged from shipping please contact us and we will provide a prepaid return label to send back for a replacement or refund.

• Returned items must be in the original packaging (including plastic wrapped items) and in brand new condition.
• Any returns received installed, mounted, used or missing components will be subject to return fee\'s.

· · · PAYMENTS · · ·

• We accept all payment methods through \'s payment system
• PayPal, and all major credit cards/debit cards are accepted.

· · · response · · ·

• Customer satisfaction is a top priority for us. If you have any issues with your order, please let us know. We will make every effort to resolve any problems and ensure you are satisfied.

· · · CONTACT US · · ·

• We appreciate your business. If you have any questions, please message us through and we will respond within 24 hours on weekdays. Feel free to browse our store for other available items. Thank you again for choosing to shop with us!

Powered By 3Dsellers.com - Try for Free!

---