Product IntroductionWindshield OBD+GPS HUD
This head-up display reflects driving data and car data on the windscreen of the car, allowing the driver to see the data more clearly. The OBD system reads data from the car\'s trip computer and the GPS uses satellite signals as a signal source to display your driving data, so you can switch between the two modes freely, depending on the condition of your car. You can switch between the two modes, depending on the condition of your car. The product displays a wide range of data such as speed, travel time, distance travelled, water temperature, voltage, etc. The product updates your driving data in real time according to the signal source. The screen and functions can be switched at will.
Product Photograph
The product has an automatic light sensing function. During the day or night, the product can sense the ambient brightness of the outside world and then adjust its own brightness, so that the product image can be seen clearly. So when you view the product data, you don\'t have to worry about not seeing clearly. In addition, if you feel that you are not satisfied with the brightness of the product, you can manually adjust it according to the instructions. The product setting is simple, easy to operate and install.
daytime
daytime
night
night
Multiple functions of the productMultiple function display, function can be switched at will.
The dual system product has two modes, OBD mode and GPS mode. OBD mode is suitable for most cars after 2008. When your car is not compatible with the OBD mode of this product, you can switch to GPS mode for use. The product has many functions, such as speed, local time, RPM, voltage, fuel consumption, driving time, driving distance, altitude, satellite number, etc. In addition, there are various prompt functions, such as overspeed prompt. When your speed exceeds your limited speed value, the product will prompt you. If you find that the product data is inaccurate, it\'s okay. You can adjust and calibrate according to the instructions.
Other special matters
GPS
- The GPS system is applicable to all cars, whether your car is a car, a van, a motorcycle or a bicycle. As long as the power supply is available, the product can receive satellite signals and start working.
- When you use this product, connect the cable and the product, and there will be about one minute to search for the satellite signal, which is the time to search for the satellite signal. When the satellite logo disappears or no loger blinks, it will prove that the product has searched for the satellite signal and can work normally.
- When the product is in the underground parking lot, tunnel, enclosed space and other places, it may not be able to search for signals. At this time, you only need to drive the car to an open place to search for stars for normal use. If you can\'t find the signal when using the product in the car, you can connect the cable and put the product outside the window to search for the signal, and then install it in the car to start using.
OBD
- When connecting a car to use the product, you need to use the cable in the product box, then connect the product interface and cable, and then plug the other end of the socket into the car\'s OBD interface. The product will turn on and you can start using it.
- The OBD mode is applicable to most cars with the OBD2 protocol after 2008. If your car is not compatible with the OBD mode, you can switch the product mode to GPS mode and use GPS mode when starting up.
- The OBD cable provided in the product box can be used in two modes. Please do not plug other cables into the product to avoid damage.
Speed unit switch
Each product in our store has two speed units: MPH and KM/H. When we ship the goods to your country, we have adjusted the speed unit of the product to your local common unit. If the goods, you receive are not your usual units, it doesn\'t matter. You can switch units according to the instructions in the manual. After saving successfully, they can be displayed. Your country uses miles to switch to MPH, and your country uses kilometers per hour to switch to KM/H. Switching is very convenient and simple.
Installation methodThis product can be used with or without the reflective film
When installing the product, select the installation position of the product, and then project it onto the windshield accordingly. Then, wipe the corresponding position of the windshield and keep it dry. There is a reflective film in the box of the product. After taking out the reflective film, first tear the film of the red note and paste it on the window. Please note that it is the place where the product reflects onto the windshield. Then tear off the film of the black note. The product image data can be well reflected on the windshield. Maybe you are not allowed to have obstructions on the glass in your country, which maybe make you can not pass the vehicle inspection. You can choose not to paste this reflective film.
