WELCOME TO MY STORERollo De Vinilo Fibra Carbono 5D Para Exterior Calificado Automotor Coches VinilDescription:Install Temp: 60F to 80F (16C to 32C)
End Use Temp: -65F to 225F (-60C to 107C)
Easily cleaned with water and soup
Long lasting for around 4-5 yearsBonds to flat or curved surfaces like roofs, hoods, trunk, bumpers, fenders, mirror covers, dashboards, spoiler, lips, side pillar bars, rims, door handles, windshield, interior trim, etc, or such as cell phone, laptop, speaker, or any items you want.Conversion of Length(Approximately):
1 inches = 2.54cm = 25.4mm
1 foot = 12” inches = 30.48cm = 0.304m
1 Yard = 3 Feet = 36” inches = 91.44cm
1 Meter = 3.28 Feet = 39.47” inches = 100cm
Water resistant and weather proof.
Flexible and Stretchable for concave area.
Low cost to change the look of your vehicles.
Easy installation with dry application method.
Heat gun or household blow dryer for shaping is required.
Low - medium tack self adhesive .
Easy to fit in most tight spots or corners (3M primer 94 is requireed for non sticky surfaces, curves & corners)
Material has no warranty for fading. Fluorescent Neon colors tend to fade faster than normal colors. Fading can be reduced with over lamination, preventing stretched areas, which fade even faster, and shelter from high U.V. times during the day.
Material is specially made for vehicle exterior paint surface in good condition. Buyers take self responsibility on unsuccessful result on other usage.
Always pre-test vinyl installation on vehicles.
Due to different monitors/calibrations, colors may vary slightly from the pictures.
Film colors can vary slightly from roll to roll. For the most consistency, please purchase a full roll.
For best result, professional installation is required; Buyers take responsibility on physical damage during installation such as over heating, over stretching, ripping.
This vinyl is designed for vehicle exterior wrap use ONLY. This vinyl won't stick good on polyethylene, polypropylene, ABS, PET/PBT blends, concrete, wood, glass, plastic, textured, aluminum, metal and painted metal surfaces. Installers must use 3M primer 94 for additional adhesion. This vinyl is not originally designed for plotter or cutter use.
Buyer is responsible for all of the wrinkles & creases issue if using on a plotter or cutter.very
Packet: 30*152cm 5D carbon fiber stikcer 1 roll sheet
