High quality aftermarket products. Built to strict quality control standards. Easy installation. Instruction is not included. Professional installation is recommended. Please double confirm the compatibility as well as the part number before purchasing. All of our starters are tested to ensure product performance and durability Teeth: 9 Voltage: 12 Rotation: CW Starter Type: PLGRPart Number Starter 17950 For Dodge Dakota Ram 1500 2006-2010 Durango 2006 2007 2008 2009 US
High quality aftermarket products. Built to strict quality control standards. Easy installation. Instruction is not included. Professional installation is recommended. Please double confirm the compatibility as well as the part number before purchasing. All of our starters are tested to ensure product performance and durability Teeth: 9 Voltage: 12 Rotation: CW Starter Type: PLGRPart Number
- Arrowhead:SND0549
- For Chrysler:04801256AA, 04801256AB, 04801256AC, 4801256AA, 4801256AB, 4801256AC
- DENSO:428000-3050, 428000-3051
- J & N:410-52233
- LESTER:17950
- NAPA:244-6986
- PIC:190-476
- 2006-2010 For Dodge Dakota 3.7L(226) V6
- 2006-2010 For Dodge Dakota 4.7L(287) V8
- 2006-2009 For Dodge Durango 3.7L(226) V6
- 2006-2010 For Dodge Ram 1500 3.7L(226) V6
- 2006-2010 For Dodge Ram 1500 4.7L(285) V8
- 2006-2009 For MITSUBISHI Raider 3.7L(226) V6
- 2006-2007 For MITSUBISHI Raider 4.7L(287) V8
- 2011-2013 Ram 1500 PICKUP 3.7L(226) V6
- 2011-2012 Ram 1500 PICKUP 4.7L(287) V8
- 2011 Ram Dakota 3.7L(226) V6
- 2011 Ram Dakota 4.7L(287) V8
- 1 x Starter
How to Install a Car Starter:
There’s never a convenient time for your vehicle’s starter to fail. A car starter's job is to kick over the engine in your car so your vehicle starts.When you find yourself with a vehicle that won’t start, there are a number of a number of issues that may be the culprit,but once you’ve narrowed it down to a faulty starter, you can replace it using just common hand tools.
Part 1: Removing a Bad Starter
(1).Disconnect the battery.
You will not need to remove the positive cable on the battery.
Always disconnect the battery before servicing the electrical system in your vehicle.
(2).Jack up the vehicle if need be.
Ensure you jack the vehicle up on firm, level ground.
(3).Locate the starter.
The smaller cylinder attached to the starter is the starter solenoid.
A wire should run directly from the positive terminal on the battery or from the fuse box under the hood to the top terminal on the starter the wiring to the solenoid.
In some cases, it may just be clips you need to disconnect for the wiring.
On some starters, you will need to loosen bolts or screws that hold the wires in place.
(5).Remove the starter retaining bolts then the starter.
Be sure to use the correct size socket, otherwise you risk damaging the bolts.
(6).Compare the new starter to the old one.Slide the starter into place.
If the two starters don’t look mostly identical, it may not be the correct starter for your vehicle.
New starter solenoids often come with four terminals, but can be used with only two.
Part 2: Installing a New Starter
(7).Insert the starter retainer bolts.
If the bolt does not thread properly, unscrew it and try again.
Make sure the bolts are tight so they can’t vibrate loose while the engine is running.
(8).Connect the wiring to the starter solenoid.
With the starter secured in place, reconnect the wiring you disconnected from the old starter onto the terminals on the new one. If your new solenoid has four terminals but your old one had two, only utilize the top and bottom terminal on the new solenoid. If your old one had four and the new one does as well, connect them to the same terminals they were connected to on the old one.
(9).Reconnect the battery.
With the starter installed and wired, reconnect the black cable to the negative terminal on the battery and tighten it in place. Insert the key into the ignition and attempt to start the vehicle.
If the vehicle fails to start with the new starter in place, ensure the battery is fully to the vehicle as you attempt to start it.
As you turn the key in the ignition, listen for the sounds the engine makes to help determine if you have an issue with your starter. If the engine makes no sound whatsoever, or you hear only a faint clicking, it may be because there isn’t enough power reaching the electric starter motor.
(11).Ensure the battery terminals are clean and secure.Charge your vehicle’s battery.
A weak connection from the battery can prevent the engine from starting.
Wear gloves when cleaning battery terminals to avoid getting battery acid on your skin.
If you suspect the battery may simply be low on power, try charging it using either a trickle charger or another vehicle to jump start it. Be sure to connect the red cable to the positive terminal on each vehicle and the black to the negative.
(12).Check to see the starter solenoid is bad.
If the test light does not light up, it means power is not reaching the starter motor due to a faulty solenoid or a dead battery.
If the test light does light up, it means the solenoid is good, but the starter itself may have failed.
Frequently Asked Questions:
(1).Why is my car starter burning out?
You likely cranked the starter for too long.
(2).I have to change the starter fairly often in my car. What could be causing this?
A leak of some sort could be fouling the starter if fluid is dripping on it. If that's the case,
replacing the starter doesn't fix the leak so it's only a matter of time before the new starter fails.
(3).What is the black wire connected to?
He black wire can be commonly associated with the wire that connects the battery to the ignition.
If this is not the wire that you are referring to then it could be a random wire that has been detached from your fuse box?
How big is this wire? If it is rather stout then that would be your battery cables. If it is a small wire then it could be several different things.
Follow it and find the origin of the wire, it could be a simple fix just take a look at it.
(4).What does a bad starter sound like?
In my case, there was very little noise when the ignition was turned, and all that was heard was a distinctive click.
One really common sign is if you see any smoke coming from the starter.
(5).If my car is grinding when I turn the key, does that mean I have a bad starter?
No. It's your flywheel. When you start your car the grinding noise would be your flywheel that's connected to the starter.
Item SpecificsCondition NewManufacturer Warranty YesOther Part Number 244-6986, 190-476, 91-29-5665, 17950Voltage 12Fitment Type Direct ReplacementStarter Type PLGRInterchange Part Number SND0549, 04801256AA, 04801256AB, 04801256ACManufacturer Part Number VEH662070Brand KACNumber of Teeth 9Type Starter MotorFeatures Clockwise RotationUPC 997750662070MPN VEH662070
Payment PayPal only!
⭐ We only accept Paypal.
⭐ Payment should be completed within 4 days after sale closed, or unpaid dispute will be filed for an closing sale. An unpaid case will be filled after 4 days.
⭐ Custom duties, taxes, or charges are not included in the cost you pay to us.
⭐ We send all the items are based on your paypal address.
⭐ Please make sure your PayPal and address is correct. If not, please correct it before payment.Shipping
We only ship this item to United States !
⭐We ship to your address. Each package will be shipped by UPS or Fedex with tracking number.
⭐Please check your shipping address carefully before checkout, it can't be changed if order completed.
⭐Ship within 1 business day once payment completed. Orders placed on weekend will be shipped within 3 days.
⭐Seriously promise: Refund or resend will be offered if item still not arrive in 7-10 business days. Just send us an email ,we will give you a satisfied solution as soon as possible.
Returns About Returns!⭐If you are not satisfied when you receive your item, please return it within 7 days for a replacement or money back. Please contact me before you return it.
⭐Defective items Must Be reported and returned to us within the warranty period. All returned items must be in the original packaging and you must tell us what the shipping tracking number, specific reason for the returnand and give us your ID.
⭐We act as a responsible seller, we are willing to actively undertake the following responsibilities:
a. The item is lost during transit;
b. The item is damaged during transport;
c. Due to our work errors, transporting the wrong items to the buyer;
d. The item in the actual use of the process of quality problems.Contact Us
⭐We will strive to providing the greatest service and bringing the highest satisfaction to all of our customers.
DESCRIPTIONPAYMENTSHIPPINGRETURN POLICYCONTACT US Starter 17950 For Dodge Dakota Ram 1500 2006-2010 Durango 2006 2007 2008 2009 US
High quality aftermarket products. Built to strict quality control standards. Easy installation. Instruction is not included. Professional installation is recommended. Please double confirm the compatibility as well as the part number before purchasing. All of our starters are tested to ensure product performance and durability Teeth: 9 Voltage: 12 Rotation: CW Starter Type: PLGRPart Number
- Arrowhead:SND0549
- For Chrysler:04801256AA, 04801256AB, 04801256AC, 4801256AA, 4801256AB, 4801256AC
- DENSO:428000-3050, 428000-3051
- J & N:410-52233
- LESTER:17950
- NAPA:244-6986
- PIC:190-476
- 2006-2010 For Dodge Dakota 3.7L(226) V6
- 2006-2010 For Dodge Dakota 4.7L(287) V8
- 2006-2009 For Dodge Durango 3.7L(226) V6
- 2006-2010 For Dodge Ram 1500 3.7L(226) V6
- 2006-2010 For Dodge Ram 1500 4.7L(285) V8
- 2006-2009 For MITSUBISHI Raider 3.7L(226) V6
- 2006-2007 For MITSUBISHI Raider 4.7L(287) V8
- 2011-2013 Ram 1500 PICKUP 3.7L(226) V6
- 2011-2012 Ram 1500 PICKUP 4.7L(287) V8
- 2011 Ram Dakota 3.7L(226) V6
- 2011 Ram Dakota 4.7L(287) V8
- 1 x Starter
How to Install a Car Starter:
There’s never a convenient time for your vehicle’s starter to fail. A car starter's job is to kick over the engine in your car so your vehicle starts.When you find yourself with a vehicle that won’t start, there are a number of a number of issues that may be the culprit,but once you’ve narrowed it down to a faulty starter, you can replace it using just common hand tools.
Part 1: Removing a Bad Starter
(1).Disconnect the battery.
You will not need to remove the positive cable on the battery.
Always disconnect the battery before servicing the electrical system in your vehicle.
(2).Jack up the vehicle if need be.
Ensure you jack the vehicle up on firm, level ground.
(3).Locate the starter.
The smaller cylinder attached to the starter is the starter solenoid.
A wire should run directly from the positive terminal on the battery or from the fuse box under the hood to the top terminal on the starter the wiring to the solenoid.
In some cases, it may just be clips you need to disconnect for the wiring.
On some starters, you will need to loosen bolts or screws that hold the wires in place.
(5).Remove the starter retaining bolts then the starter.
Be sure to use the correct size socket, otherwise you risk damaging the bolts.
(6).Compare the new starter to the old one.Slide the starter into place.
If the two starters don’t look mostly identical, it may not be the correct starter for your vehicle.
New starter solenoids often come with four terminals, but can be used with only two.
Part 2: Installing a New Starter
(7).Insert the starter retainer bolts.
If the bolt does not thread properly, unscrew it and try again.
Make sure the bolts are tight so they can’t vibrate loose while the engine is running.
(8).Connect the wiring to the starter solenoid.
With the starter secured in place, reconnect the wiring you disconnected from the old starter onto the terminals on the new one. If your new solenoid has four terminals but your old one had two, only utilize the top and bottom terminal on the new solenoid. If your old one had four and the new one does as well, connect them to the same terminals they were connected to on the old one.
(9).Reconnect the battery.
With the starter installed and wired, reconnect the black cable to the negative terminal on the battery and tighten it in place. Insert the key into the ignition and attempt to start the vehicle.
If the vehicle fails to start with the new starter in place, ensure the battery is fully to the vehicle as you attempt to start it.
As you turn the key in the ignition, listen for the sounds the engine makes to help determine if you have an issue with your starter. If the engine makes no sound whatsoever, or you hear only a faint clicking, it may be because there isn’t enough power reaching the electric starter motor.
(11).Ensure the battery terminals are clean and secure.Charge your vehicle’s battery.
A weak connection from the battery can prevent the engine from starting.
Wear gloves when cleaning battery terminals to avoid getting battery acid on your skin.
If you suspect the battery may simply be low on power, try charging it using either a trickle charger or another vehicle to jump start it. Be sure to connect the red cable to the positive terminal on each vehicle and the black to the negative.
(12).Check to see the starter solenoid is bad.
If the test light does not light up, it means power is not reaching the starter motor due to a faulty solenoid or a dead battery.
If the test light does light up, it means the solenoid is good, but the starter itself may have failed.
Frequently Asked Questions:
(1).Why is my car starter burning out?
You likely cranked the starter for too long.
(2).I have to change the starter fairly often in my car. What could be causing this?
A leak of some sort could be fouling the starter if fluid is dripping on it. If that's the case,
replacing the starter doesn't fix the leak so it's only a matter of time before the new starter fails.
(3).What is the black wire connected to?
He black wire can be commonly associated with the wire that connects the battery to the ignition.
If this is not the wire that you are referring to then it could be a random wire that has been detached from your fuse box?
How big is this wire? If it is rather stout then that would be your battery cables. If it is a small wire then it could be several different things.
Follow it and find the origin of the wire, it could be a simple fix just take a look at it.
(4).What does a bad starter sound like?
In my case, there was very little noise when the ignition was turned, and all that was heard was a distinctive click.
One really common sign is if you see any smoke coming from the starter.
(5).If my car is grinding when I turn the key, does that mean I have a bad starter?
No. It's your flywheel. When you start your car the grinding noise would be your flywheel that's connected to the starter.
Item SpecificsCondition :NewManufacturer Warranty :YesOther Part Number :244-6986, 190-476, 91-29-5665, 17950Voltage :12Fitment Type :Direct ReplacementStarter Type :PLGRInterchange Part Number :SND0549, 04801256AA, 04801256AB, 04801256ACManufacturer Part Number :VEH662070Brand :KACNumber of Teeth :9Type :Starter MotorFeatures :Clockwise RotationUPC :997750662070MPN :VEH662070
Payment PayPal only!
⭐ We only accept Paypal.
⭐ Payment should be completed within 4 days after sale closed, or unpaid dispute will be filed for an closing sale. An unpaid case will be filled after 4 days.
⭐ Custom duties, taxes, or charges are not included in the cost you pay to us.
⭐ We send all the items are based on your paypal address.
⭐ Please make sure your PayPal and address is correct. If not, please correct it before payment. Shipping
We only ship this item to United States !
⭐We ship to your address. Each package will be shipped by UPS or Fedex with tracking number.
⭐Please check your shipping address carefully before checkout, it can't be changed if order completed.
⭐Ship within 1 business day once payment completed. Orders placed on weekend will be shipped within 3 days.
⭐Seriously promise: Refund or resend will be offered if item still not arrive in 7-10 business days. Just send us an email ,we will give you a satisfied solution as soon as possible.
Returns About Returns!⭐If you are not satisfied when you receive your item, please return it within 7 days for a replacement or money back. Please contact me before you return it.
⭐Defective items Must Be reported and returned to us within the warranty period. All returned items must be in the original packaging and you must tell us what the shipping tracking number, specific reason for the returnand and give us your ID.
⭐We act as a responsible seller, we are willing to actively undertake the following responsibilities:
a. The item is lost during transit;
b. The item is damaged during transport;
c. Due to our work errors, transporting the wrong items to the buyer;
d. The item in the actual use of the process of quality problems. Contact Us
⭐We will strive to providing the greatest service and bringing the highest satisfaction to all of our customers.
All rights reserved.
Shop CategoryStore Home Headlights Starter A/C Condenser Power Steering Pump Radiator A/C Compressor Car Cooling Fan Alternator Front Bumper Side Steps Fan Clutch Window Regulator Helmet Power Steering Rack and Pinion OtherHot Item Starter For HONDA Accord 2008 2009 2010 2011 2012 Element 2009-2011 CR-V 07-11 USD 69.99 Pair Headlights Headlamps Assembly For 2009-2018 For Dodge Ram 1500 2500 3500 Chrome USD 125.99 Crankshaft Position Sensor For 1999-2006 For Chevy Avalanche Silverado Suburban For GMC USD 13.99 For 2008-2015 For NISSAN Rogue 2.5L L4 AC A/C Compressor Clutch Assembly Repair Kit USD 45.99 For 2007 2008 For MAZDA CX-7 L4 2.3L A/C AC Air Conditioner Compressor EG2161450G USD 91.99 Excellent Delivery
Help & InfoPayment PolicyShipping PolicyReturn PolicyFAQAbout UsNew List Item Starter For Ford Explorer Mercury Mountaineer 02-10 For Lincoln Aviator 03-05 6658 USD 62.99 Starter For 1996-04 2005 2006 2007 Mercruiser & Volvo Penta V6 V8 Engines 6792B USD 55.99 Starter For Ford Ranger 1992-2001 2.3L & 2.5L Mustang 1992-1993 2.3L 3231 3238 USD 55.99 SBC BBC Starter 168 TOOTH For Chevy Blazer For GMC Olds 4.3L 5.7L 7.4L 6449 350 454 USD 62.10 Starter Motor For 2002 2003 2004 2005 2006 For ACURA RSX L4 2.0L 17886 31200PRBA01RM USD 99.99
On Nov 14, 2022 at 23:32:44 PST, seller added the following information:
