Z Automotive Tazer Lite Programmer for 2018-2026 Jeep Wrangler JL & Gladiator JT PART NUMBER: Z_TZR_JLL
BRAND: Z Automotive DESCRIPTION Tazer Lite Programmer
The Tazer Lite is an electronic plug-in device which features can be broken into two categories: 1) Vehicle Settings are changes made to the vehicle, such as activating disabled factory features, or settings which accomodate other upgrades. These changes will continue to operate after the Tazer is unplugged. 2) Live Functions are operations the Tazer performs live, only while it is physically.
Seeking viable products for a vehicle update? Z Automotive firmware is meant for that. Designed with modern innovations to stringent quality standards, the products are going to elevate the performance to a new level. Z Automotive products will help extend the functionality of your vehicle in a cost-effective and user-friendly way. They sport numerous advanced features allowing you to make the impossible possible. The products present an up-to-date refined tool that modifies different parameters of different electronic systems and adapts them to your driving style, performance requirements, and excitement wants.
Simple, plug-in installation - Tazer JL Lite simply plugs in, in place of your SGW module. Supports 2018+ Wrangler JL and Jeep Gladiator All engine and transmission variations supported, including export models.
Features are all accessed using the dash display, using steering wheel buttons to navigate the menus.
Tazer JL Lite features can be broken into three categories:
Vehicle Settings are accessed with the engine OFF and the ignition in the RUN position. These are changes made to the Jeep such as tire size, gear ratios or settings which accommodate other upgrades. These changes will continue to operate after the Tazer JL Lite is unplugged.
Live Functions are accessed with the engine ON. These are operations the Tazer JL Lite performs live, only while it is physically connected. plugged in.
\"Non-Menu\" Live Functions are not located in a menu. They are activated automatically or with a steering wheel button combination. These are operations the Tazer JL Lite performs live, only while it is physically connected.
Change your Jeep\'s programming with Z Automotive Jeep Wrangler JL Tazer Lite programmers. Make use of \"live\" functions like auto start/stop disable, Light Show mode, and more. You can also adjust vehicle settings like tire size, gear ratio, and transfer case low ratio, to name a few. Z Automotive Jeep Wrangler JL Tazer Lite programmers also include a one-touch \"return to stock\" feature for getting back your factory settings.
Some of the many other functions and features include:
- Plugs into your vehicle\'s SGW module
- All features are accessed using the dash display
- Use the steering wheel buttons to navigate the menus
- Cooldown mode
- Winch mode
- Rock Crawl mode
- AutoTracKill mode
- Change TPMS pressure warning limit
- Clear \"check engine\" light
List of Vehicle Settings:
- Light Show - 6 preset and 3 make-your-own light shows that flash all the exterior lights - perfect for car shows/first responders/off-road visibility - controlled from
- key fob or steering wheel buttons - can be enabled in-motion for use in parades, off-road and for legal police/EMS applications (contact support for more info) read and clear DTCs system-wide or in specific modules
- change tire size
- change gear ratio (max 4.11 on 4XE)
- change Transfer Case LOW ratio
- enable/disable TPMS system
- set TPMS pressure warning limit, front and rear, between 25psi and 85psi
- one-touch return-to-stock - quick Unmarry function returns to stock
List of Live Functions:
- activate Light Show
- define Winch Mode RPM (excl. 4XE)
- flash lights to indicate tire pressure while filling
- Dark Mode - turn off all exterior lighting and dash/radio/shifter lights while parked with the engine running
- activate and cycle through camera inputs
- display Vacuum/Boost Gauge
- activate 0-30 timer
- activate 0-60 timer
List of \"Non-Menu\" Live Functions:
- AutoStopStart Disable - Tazer JL Lite will automatically remember the last state of the auto stop/start system and set it for you the next time you start the vehicle disconnect sway bar in 2WD up to 30mph
- Cooldown Mode - turn on engine fans on-demand
- Winch Mode - raise idle RPM to user-selected value between 1250 and 2000 (excl. 4XE)
- Line Lock - lock the front brakes for an easy burnout
- Rock Crawl - lock all four brakes with a steering wheel button combo to hold the vehicle still, especially helpful when off-road (excl. 4XE) lock all four brakes in park to anchor Jeep (shortcut) (excl. 4XE)
- partial reboot
About this item:
- Advanced Lighting Options – It has 6 preset and 3 make your own light shows that flash all the exterior lights which is perfect for car shows, first responders and off-road visibility which is controlled from key fob or steering wheel buttons. It can be enabled in-motion for use in parades, off-road and for legal police/EMS.
- Simple Plug-in Installation – Simply unplug the SGW module and plug the Tazer JL Mini in its place. Located above the OBD2 Diagnostic connector. To make it easier for removal and reinstallation for dealer visits, add on the SGW Extension Cable.
- AutoStopStart– Tazer JL Lite will automatically remember the last state of the auto stop/start system and set it for you the next time you start the vehicle.
- Dark Mode – It turns off all exterior lighting, dash, radio and shifter lights while parked with the engine running for reduced visibility.
- Adjust the Settings – Use flash lights to indicate tire pressure while filling, activate and cycle through camera inputs, change tire size, enable/disable TPMS system, display vacuum/boost gauge, cool down mode, winch mode, rock crawl and so much more.
VEHICLE COMPATIBILITY 2018-2026 Jeep Wrangler JL2018-2026 Jeep Gladiator JT2018-2026 Jeep 4XE
