This item is pre-owned – itwill work like new once programmed to your vehicle
One (1)
Aftermarket remote keylessentry fob alarm
Transmitter control clickerkeyfob
controller replacement
FUNCTIONS AT 100% TESTED & GUARANTEED
Viper / Python / Clifford
FCC ID: EZSDEI7141
(Alternate Spelling: EZSDEI7I4I)
Part #: 7142X
(Interchangeable) Part #s:
7141V
7141P
7141X
7142V
Frequency: 433 - 434 MHz
LED color: Blue
4 buttons
Compatible with the following systems:
ARROW 5.1
AVANTGUARD 5.1
CLIFFORD MATRIX 12
CLIFFORD MATRIX 12.2X
CLIFFORD MATRIX 12.5X
CLIFFORD MATRIX 70.5
CONCEPT 470
INTELLIGUARD 770
Programming Instructions:
You will need a valet switch for this if you do not have one see your local locksmith or car/audio dealer
1) Door. Open Door.
2) Key. Turn the key to the ON position.
3) Choose. Within 5 seconds press and release the Valet/Program button the number of times corresponding to selected channel listed below.
After you have selected the channel, press the Valet/Program button once more and hold it. The LED flashes the same number of times as the channel selected and the siren (if connected) chirps to confirm the selected channel. DO NOT release the Valet/Program button!
4) Transmit. While holding the Valet/Program button, press the button from the transmitter. The unit chirps (if horn or siren are connected) to confirm that the transmitter has been taught to the receiver.
5) Release. Now that the code is learned, you may release the Valet/Program button and remove the key.
Weensure proper working condition of all previously used or new remotes through aserious of tests performed with the Santronics Testing device. Each button istested for functionality prior to shipment and then logged.
Yes. It will have a working battery installed.
Battery Condition:
Your vehiclewill be installed with one of the following keyless entry systems:
The aboveinformation can change which remote you need
for your installed remote keyless system.
