Introduction?? Pari Front Air Suspension Spring Bags For Range Rover L405 Sport L494 2013-2019
Introduction??
Two front Air Suspesnion shock absorbers are connected from the front suspension to the chassis, and
two rear Air Suspension shock absorbers are attached between the rear suspension and the chassis. Shock
absorbers have three main purposes:
1. They control spring action and oscillations to provide the desired ride quality.
2. They help prevent body sway and lean while cornering.
3. They reduce the tendency of a tire tread to lift off the road, which improves tire life, traction, and directional stability.
Because Air suspension shock absorbers control spring action, spring oscillations, and chassis oscillations, they contribute to vehicle safety and passenger comfort. If the shock absorbers are
worn out, excessive chassis oscillations may occur, particularly on rough road surfaces. Th ese
excessive chassis oscillations may result in loss of steering control. Worn-out shock absorbers
also cause excessive body lean and sway while cornering, which may cause the driver to lose
control of the vehicle. Shock absorbers are extremely important to providing longer tire life
and improving vehicle handling, steering quality, and ride quality.
Air suspension Shock absorber design is matched to the defl ection rate of the coil spring to control the spring
action. Several diff erent types of shock absorbers are available for special service requirements.
Fitting the Followingvehicle:
Land Rover Range Rover
Autobiography Black Sport Utility 4-Door 5.0L 2014
Autobiography LWB Sport Utility 4-Door 5.0L 2017-2019
Autobiography Sport Utility 4-Door 5.0L 2013-2020
Autobiography Sport Utility 4-Door 2.0L 2020
Base Sport Utility 4-Door 5.0L 2013
Base Sport Utility 4-Door 3.0L 2014-2020
HSE Sport Utility 4-Door 5.0L 2013
HSE Sport Utility 4-Door 3.0L 2014-2020
HSE Sport Utility 4-Door 2.0L 2020
Supercharged Sport Utility 4-Door 5.0L 2013-2019
SV Autobiography Dynamic Sport Utility 4-Door 5.0L 2018-2020
SV Autobiography Sport Utility 4-Door 5.0L 2016-2020
Vogue SE Sport Utility 4-Door 5.0L 2013 2017
Vogue Sport Utility 4-Door 5.0L 2014-2016 2018-2019
Range Rover Sport
Autobiography Dynamic Sport Utility 4-Door 5.0L 2016 2018-2020
Autobiography Dynamic Sport Utility 4-Door 3.0L 2019
Autobiography Dynamic Sport Utility 4-Door 2.0L 2020
Autobiography Sport Utility 4-Door 5.0L 2014-2018
Base Sport Utility 4-Door 5.0L 2014-2016
HSE Dynamic Sport Utility 4-Door 5.0L 2019-2020
HSE Dynamic Sport Utility 4-Door 3.0L 2017-2019
HSE PHEV Sport Utility 4-Door 2.0L 2019
HSE Sport Utility 4-Door 5.0L 2017-2018
HSE Sport Utility 4-Door 3.0L 2014-2020
HSE Sport Utility 4-Door 2.0L 2020
HST Sport Utility 4-Door 3.0L 2016 2019 2020
S Sport Utility 4-Door 3.0L 2019
SE Sport Utility 4-Door 3.0L 2014-2020
Supercharged Dynamic Sport Utility 4-Door 5.0L 2016 2018 2019
Supercharged Sport Utility 4-Door 5.0L 2014-2018
SVR Sport Utility 4-Door 5.0L 2015-2020
Evolution Related??
Range Rover
Classic First generation (1970-1996)
P38A Second generation (1994-2002)
L322 Third generation (2002-2012)
L405 Fourth generation (2013-present)
Range Rover Sport
L320 First generation (2005-2013)
L494 Second generation (2013-present)
SVR (2015 Pre-Facelift)
SVR (2018 Facelift)
Advantage of Our Air Suspension:
-The Original Size
-Direct Replacement
-Perfect Fit
-Safe and Stable
-Longer Life
-Eliminating abnormal sound
-After-sales Guarantee
-Made of high quality raw materials, effectively reduce air leakage, strong sealing
-All parts are hand inspected off the line before packaging and once again by our team before shipment
-It has a high compressive strength and good sound insulation to ensure our driving comfort and safety
If you are interested with anyother air suspension parts, please click and saveour store
When Should We Replace Air Suspension:
- The car was subjected to excessive up, down, and left/right vibrations, nods during braking, and irregular tire wear
- An excessive tilt or swing of a car in a turn
- Wear or damage of final assembly housing, resulting in oil leakage of air suspension and affecting its performance
- If the car vibrates violently when it comes to an emergency stop while moving slowly
?
Common Air Suspension Failure Inspection:
1.Abnormal Sounds
When the air suspension strut is damaged,it will give out an abnormal sound.
2.Poor Handling Stability
When the car passes over a rough road ,it bumps and cannot keep steady.
3.Air Leakage
Leaking air??seal gasket failed.
4.Car Body Slant
Under the condition of poor road (Bumpy Road),the body will collapse.
5.Irregular Tire Wear
The air suspension sturt needs to be replaced if tyre surface has uneven wear marks.
6.Over Bend
When you turn to brakes,tilt faster and the steering wheel will fail.
Recommended replacement cycle:
Since the average annual distance of the car is 20,000 kilometers, the replacement frequency is obtained every 4years or 80.000km. In fact, the replacement frequency will vary depending on the car condition, road condition and shock absorber manufacturer.When driving a certain number of kilometers, we should take corresponding measures to ensure our driving safety.
- 20.000km: Please check your air suspension
- 80.000km: Need to replace your air suspension
- 100.000km: Please replace your air suspension as soon as possible
OEM Part Suspension Shock Absorber Operation:
Air Suspension Shock absorbers are usually mounted between the lower control arms and the chassis. When
a vehicle wheel strikes a bump, the wheel and suspension move upward in relation to the
chassis. Upward wheel movement is referred to as jounce travel. Th is jounce action causes
the spring to deflect or compress. Under this condition, the spring stores energy and springs
back downward with all the energy absorbed when it defl ected upward. Th is downward spring
and wheel action is called rebound travel. If this spring action were not controlled, the
wheel would strike the road with a strong downward force, and the wheel jounce would occur
again. Th erefore, some device must be installed to control the spring action, or the wheelwould bounce up and down many times after it hit a bump, causing passenger discomfort,
directional instability, and suspension component wear.
Shock absorbers are installed on suspension systems to control spring action. When a wheel
strikes a bump and jounce travel occurs, the shock absorber lower tube unit is forced upward.
Th is action forces the piston downward in the lower tube unit. Since oil cannot leak past the
piston, the oil in the lower unit is forced through the piston orifi ces or valves to the upper oil
chamber. These valves provide precise oil fl ow control and control the upward action of the wheel
and suspension, which is referred to as a shock absorber compression stroke (Figure 5-2).
When the spring expands downward in rebound travel, the lower shock absorber unit is
also forced downward. When this occurs, the piston moves upward in the lower tube unit,
and hydraulic oil is forced through the piston orifi ces or valves from the upper oil chamber to
the lower oil chamber. Since the valves restrict oil flow with precise control, the downward
suspension and wheel movement is controlled.
When the shock absorber piston moves, oil is forced through the piston. Since the piston
valves and orifi ces resist the fl ow of oil, friction and heat are created. Th e resistance of the oil
moving through the piston must be calibrated as closely as possible to the spring’s deflection
rate or strength. Wheels and suspension systems defl ect at many diff erent speeds, depending
on the type and size of bump and the vehicle speed. Th e resistance of a shock absorber piston
increases with the square of its speed. For example, if the wheel defl ection speed increases
four times, the piston resistance is sixteen times as great. Th erefore, if a wheel strikes a large
bump at high speed, the wheel defl ection and rebound can be eff ectively locked by the shock
absorber. Shock absorber engineers prevent this action by precisely designing shock absorbervalves and orifi ces to provide enough friction to prevent the spring from overextending on
the rebound stroke. Th ese piston valves and orifi ces must not create excessive friction, which
slows the wheel from returning to its original position.
Shock absorber pistons have many diff erent types of valves and orifi ces. In some pistons,
small orifi ces control the oil flow during slow wheel and suspension movements. Stacked steel
valves control the oil fl ow during medium speed wheel and suspension movements. During
maximum wheel and suspension movements, larger orifi ces between the piston valves provide oil fl ow control. On other shock absorber pistons, the stacked steel valves alone provide
oil flow control. Regardless of the piston orifi ce and valve design, the shock absorber must be
precisely matched to absorb the spring’s energy.
During fast upward wheel movement on the compression stroke, excessive pressure in
the lower oil chamber forces the base valve open and thus allows oil to fl ow through this valve
to the reservoir. Th e nitrogen gas provides a compensating space for the oil that is displaced
into the reservoir on the compression stroke and when the oil is heated. Since the gas exerts
pressure on the oil, cavitation, or foaming of the oil, is eliminated. When oil bubbles are
eliminated in this way, the shock absorber provides continuous damping for wheel defl ections as small as 0.078 in (2.0 mm). A rebound rubber is located on top of the piston. If the
wheel drops downward into a hole, the shock absorber may become fully extended. Under
this condition, the rebound rubber provides a cushioning action.
Package Includes:
Pair for Front Right andLeftAir Suspension Springs
Notes:
Of all the suspension components, shock absorbers and struts
contribute the most to ride quality. As the vehicle is driven over road irregularities,
the shock absorbers or struts are continually operating to control the spring action
and provide acceptable ride quality. It has been my experience that shock absorbers
and struts usually wear out fi rst in suspension systems, because they are working
every time a wheel strikes a road irregularity. Th erefore, you must understand not only shock absorber and strut operation but also how ride quality is aff ected if these componen
- Please double confirm the compatibility as well as the OEM number before purchasing.
- Instruction is not included. Professional installation is recommended.
Item SpecificsPlacement on Vehicle Right Left FrontSize Single Dimension(CM) Weight(KG) 4.50Included Hardware NoneMaximum Operating Pressure (psi) 195Minimum Operating Pressure (psi) 90Drive Layout Front Engine 4WDPlatform JLR D7uMaterial Iron Aluminium Alloy RubberColor Silver BlackType Air Suspension StrutCustom Bundle NoReturn Policy 30 Days Free ReturnManufacturer Warranty 1 YearQuantity PairFitment Type Direct ReplacementOE Spec or Performance/Custom OE SpecAdjustable YesFeatures SealedBrand brauchen-autopartsManufacturer Part Number BR829490AP01Interchange Part Number LR038801, LR038803, LR052774,LR072460,LR087092Other Part Number LR057251, LR060135,LR057257,LR060137Superseded Part Number LR072447, ESCPFeature ESCP
Payment 1. We will leave positive response once we get your payment.
2. If you are dissatisfied for any reason, please do not be quick to leave negative/neutral response. We will work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive response to all our customers.
3. If you are satisfied with the product you received, please leave us positive response and 5 scores DSR.Shipping
1. Package handling takes about 2 business days at our warehouse, so please make sure entering correct payment and shipping information before checking out. Once your payment is completed, we are not going to accept any more changes to your order.
- 2.All domestic orders will be shipped via USPS, UPS or Fedex from our US warehouse and usually arrives to your door in about 2-7 business days.
- 3.Local pick up is not available.
- 4.Orders to the rest of world may be shipped out from our warehouse in HongKong.
- 5.International Buyers C Please Note:
- a. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.
- b. Please check with your country customs office to determine what these additional costs will be prior to offerding/buying.
Returns All of our brand new items come with a 30-Days money-back guarantee. Contact Us
Q: How do I pay for my purchase?
A: We accept secure payments through Managed Payments.
Q: When will the item be shipped out?
A: This item will be shipped with 2 business day once payment completed.
Q: Where is my tracking number?
A: Please log on your account, click "my "-->"my summary", or open your email box and find the shipping notification email.
Q: How do I return an item?
A: My tore accepts returns. Items must be returned within 60 days. Refunds will be given as money back. Please contact our customer service before you return an item.
DESCRIPTIONPAYMENTSHIPPINGRETURN POLICYCONTACT US Shop CategoryStore Home Bumper air suspension Lift Supports Brake System Parts◈Brake Calipers◈Brake Drums & Brake Shoes◈Brake Pads & Brake Shoes Mass Air Flow Sensors Suspension Lift Kit Strut Mount Adjustable Control /Camber Arm complete strut coilover Shocks Struts dipstick Cylinder Piston Kit Horns & Sirens snorkel air intake Ballast Module Suspension+Strut+Bearing Clock Spring Coil Springs OtherHot Item Front Right Air Suspension Shock Strut For Mercedes W222 S350 S550 RWD 2014-2020 USD 256.35 Air Suspension Compressor Pump LR140034 For Land Rover Range Rover Sport 2014-17 USD 145.87 2PCS Air Suspension Spring Bags W01-358-8033 For Triangle Hendrickson 3B12-312 USD 135.36 Pair Front Air Suspension Shock Strut For Mercedes W222 S320 S350 S550 RWD 14-20 USD 456.42 Pair Rear Air Suspension Spring Bags For Mercedes X164 GL450 GL550 W164 ML350 USD 66.22 New List Item For 2003-2008 Toyota Matrix For Corolla Front Brake Calipers & Ceramic Pads USD 118.05 For 2005-2006 Toyota For Corolla Front Brake Calipers & Brake Rotors Ceramic Pad USD 173.29 For 2014 - 2018 Kia Forte Pair Brake Calipers Rear Left & Right w/ Bracket USD 92.13 Front Disc Brake Calipers Pair Left Right For Nissan Altima 2002-2006 USD 103.09 Front Right Disc Brake Calipers For 2002-2006 Nissan Altima USD 62.99 Help & InfoPayment PolicyShipping PolicyReturn PolicyFAQAbout Us Pari Front Air Suspension Spring Bags For Range Rover L405 Sport L494 2013-2019
Introduction??
Two front Air Suspesnion shock absorbers are connected from the front suspension to the chassis, and
two rear Air Suspension shock absorbers are attached between the rear suspension and the chassis. Shock
absorbers have three main purposes:
1. They control spring action and oscillations to provide the desired ride quality.
2. They help prevent body sway and lean while cornering.
3. They reduce the tendency of a tire tread to lift off the road, which improves tire life, traction, and directional stability.
Because Air suspension shock absorbers control spring action, spring oscillations, and chassis oscillations, they contribute to vehicle safety and passenger comfort. If the shock absorbers are
worn out, excessive chassis oscillations may occur, particularly on rough road surfaces. Th ese
excessive chassis oscillations may result in loss of steering control. Worn-out shock absorbers
also cause excessive body lean and sway while cornering, which may cause the driver to lose
control of the vehicle. Shock absorbers are extremely important to providing longer tire life
and improving vehicle handling, steering quality, and ride quality.
Air suspension Shock absorber design is matched to the defl ection rate of the coil spring to control the spring
action. Several diff erent types of shock absorbers are available for special service requirements.
Fitting the Followingvehicle:
Land Rover Range Rover
Autobiography Black Sport Utility 4-Door 5.0L 2014
Autobiography LWB Sport Utility 4-Door 5.0L 2017-2019
Autobiography Sport Utility 4-Door 5.0L 2013-2020
Autobiography Sport Utility 4-Door 2.0L 2020
Base Sport Utility 4-Door 5.0L 2013
Base Sport Utility 4-Door 3.0L 2014-2020
HSE Sport Utility 4-Door 5.0L 2013
HSE Sport Utility 4-Door 3.0L 2014-2020
HSE Sport Utility 4-Door 2.0L 2020
Supercharged Sport Utility 4-Door 5.0L 2013-2019
SV Autobiography Dynamic Sport Utility 4-Door 5.0L 2018-2020
SV Autobiography Sport Utility 4-Door 5.0L 2016-2020
Vogue SE Sport Utility 4-Door 5.0L 2013 2017
Vogue Sport Utility 4-Door 5.0L 2014-2016 2018-2019
Range Rover Sport
Autobiography Dynamic Sport Utility 4-Door 5.0L 2016 2018-2020
Autobiography Dynamic Sport Utility 4-Door 3.0L 2019
Autobiography Dynamic Sport Utility 4-Door 2.0L 2020
Autobiography Sport Utility 4-Door 5.0L 2014-2018
Base Sport Utility 4-Door 5.0L 2014-2016
HSE Dynamic Sport Utility 4-Door 5.0L 2019-2020
HSE Dynamic Sport Utility 4-Door 3.0L 2017-2019
HSE PHEV Sport Utility 4-Door 2.0L 2019
HSE Sport Utility 4-Door 5.0L 2017-2018
HSE Sport Utility 4-Door 3.0L 2014-2020
HSE Sport Utility 4-Door 2.0L 2020
HST Sport Utility 4-Door 3.0L 2016 2019 2020
S Sport Utility 4-Door 3.0L 2019
SE Sport Utility 4-Door 3.0L 2014-2020
Supercharged Dynamic Sport Utility 4-Door 5.0L 2016 2018 2019
Supercharged Sport Utility 4-Door 5.0L 2014-2018
SVR Sport Utility 4-Door 5.0L 2015-2020
Evolution Related??
Range Rover
Classic First generation (1970-1996)
P38A Second generation (1994-2002)
L322 Third generation (2002-2012)
L405 Fourth generation (2013-present)
Range Rover Sport
L320 First generation (2005-2013)
L494 Second generation (2013-present)
SVR (2015 Pre-Facelift)
SVR (2018 Facelift)
Advantage of Our Air Suspension:
-The Original Size
-Direct Replacement
-Perfect Fit
-Safe and Stable
-Longer Life
-Eliminating abnormal sound
-After-sales Guarantee
-Made of high quality raw materials, effectively reduce air leakage, strong sealing
-All parts are hand inspected off the line before packaging and once again by our team before shipment
-It has a high compressive strength and good sound insulation to ensure our driving comfort and safety
If you are interested with anyother air suspension parts, please click and saveour store
When Should We Replace Air Suspension:
- The car was subjected to excessive up, down, and left/right vibrations, nods during braking, and irregular tire wear
- An excessive tilt or swing of a car in a turn
- Wear or damage of final assembly housing, resulting in oil leakage of air suspension and affecting its performance
- If the car vibrates violently when it comes to an emergency stop while moving slowly
?
Common Air Suspension Failure Inspection:
1.Abnormal Sounds
When the air suspension strut is damaged,it will give out an abnormal sound.
2.Poor Handling Stability
When the car passes over a rough road ,it bumps and cannot keep steady.
3.Air Leakage
Leaking air??seal gasket failed.
4.Car Body Slant
Under the condition of poor road (Bumpy Road),the body will collapse.
5.Irregular Tire Wear
The air suspension sturt needs to be replaced if tyre surface has uneven wear marks.
6.Over Bend
When you turn to brakes,tilt faster and the steering wheel will fail.
Recommended replacement cycle:
Since the average annual distance of the car is 20,000 kilometers, the replacement frequency is obtained every 4years or 80.000km. In fact, the replacement frequency will vary depending on the car condition, road condition and shock absorber manufacturer.When driving a certain number of kilometers, we should take corresponding measures to ensure our driving safety.
- 20.000km: Please check your air suspension
- 80.000km: Need to replace your air suspension
- 100.000km: Please replace your air suspension as soon as possible
OEM Part Suspension Shock Absorber Operation:
Air Suspension Shock absorbers are usually mounted between the lower control arms and the chassis. When
a vehicle wheel strikes a bump, the wheel and suspension move upward in relation to the
chassis. Upward wheel movement is referred to as jounce travel. Th is jounce action causes
the spring to deflect or compress. Under this condition, the spring stores energy and springs
back downward with all the energy absorbed when it defl ected upward. Th is downward spring
and wheel action is called rebound travel. If this spring action were not controlled, the
wheel would strike the road with a strong downward force, and the wheel jounce would occur
again. Th erefore, some device must be installed to control the spring action, or the wheelwould bounce up and down many times after it hit a bump, causing passenger discomfort,
directional instability, and suspension component wear.
Shock absorbers are installed on suspension systems to control spring action. When a wheel
strikes a bump and jounce travel occurs, the shock absorber lower tube unit is forced upward.
Th is action forces the piston downward in the lower tube unit. Since oil cannot leak past the
piston, the oil in the lower unit is forced through the piston orifi ces or valves to the upper oil
chamber. These valves provide precise oil fl ow control and control the upward action of the wheel
and suspension, which is referred to as a shock absorber compression stroke (Figure 5-2).
When the spring expands downward in rebound travel, the lower shock absorber unit is
also forced downward. When this occurs, the piston moves upward in the lower tube unit,
and hydraulic oil is forced through the piston orifi ces or valves from the upper oil chamber to
the lower oil chamber. Since the valves restrict oil flow with precise control, the downward
suspension and wheel movement is controlled.
When the shock absorber piston moves, oil is forced through the piston. Since the piston
valves and orifi ces resist the fl ow of oil, friction and heat are created. Th e resistance of the oil
moving through the piston must be calibrated as closely as possible to the spring’s deflection
rate or strength. Wheels and suspension systems defl ect at many diff erent speeds, depending
on the type and size of bump and the vehicle speed. Th e resistance of a shock absorber piston
increases with the square of its speed. For example, if the wheel defl ection speed increases
four times, the piston resistance is sixteen times as great. Th erefore, if a wheel strikes a large
bump at high speed, the wheel defl ection and rebound can be eff ectively locked by the shock
absorber. Shock absorber engineers prevent this action by precisely designing shock absorbervalves and orifi ces to provide enough friction to prevent the spring from overextending on
the rebound stroke. Th ese piston valves and orifi ces must not create excessive friction, which
slows the wheel from returning to its original position.
Shock absorber pistons have many diff erent types of valves and orifi ces. In some pistons,
small orifi ces control the oil flow during slow wheel and suspension movements. Stacked steel
valves control the oil fl ow during medium speed wheel and suspension movements. During
maximum wheel and suspension movements, larger orifi ces between the piston valves provide oil fl ow control. On other shock absorber pistons, the stacked steel valves alone provide
oil flow control. Regardless of the piston orifi ce and valve design, the shock absorber must be
precisely matched to absorb the spring’s energy.
During fast upward wheel movement on the compression stroke, excessive pressure in
the lower oil chamber forces the base valve open and thus allows oil to fl ow through this valve
to the reservoir. Th e nitrogen gas provides a compensating space for the oil that is displaced
into the reservoir on the compression stroke and when the oil is heated. Since the gas exerts
pressure on the oil, cavitation, or foaming of the oil, is eliminated. When oil bubbles are
eliminated in this way, the shock absorber provides continuous damping for wheel defl ections as small as 0.078 in (2.0 mm). A rebound rubber is located on top of the piston. If the
wheel drops downward into a hole, the shock absorber may become fully extended. Under
this condition, the rebound rubber provides a cushioning action.
Package Includes:
Pair for Front Right andLeftAir Suspension Springs
Notes:
Of all the suspension components, shock absorbers and struts
contribute the most to ride quality. As the vehicle is driven over road irregularities,
the shock absorbers or struts are continually operating to control the spring action
and provide acceptable ride quality. It has been my experience that shock absorbers
and struts usually wear out fi rst in suspension systems, because they are working
every time a wheel strikes a road irregularity. Th erefore, you must understand not only shock absorber and strut operation but also how ride quality is aff ected if these componen
- Please double confirm the compatibility as well as the OEM number before purchasing.
- Instruction is not included. Professional installation is recommended.
PaymentShippingReturnsContact Us 1. We will leave positive response once we get your payment.
2. If you are dissatisfied for any reason, please do not be quick to leave negative/neutral response. We will work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive response to all our customers.
3. If you are satisfied with the product you received, please leave us positive response and 5 scores DSR.
1. Package handling takes about 2 business days at our warehouse, so please make sure entering correct payment and shipping information before checking out. Once your payment is completed, we are not going to accept any more changes to your order.
- 2.All domestic orders will be shipped via USPS, UPS or Fedex from our US warehouse and usually arrives to your door in about 2-7 business days.
- 3.Local pick up is not available.
- 4.Orders to the rest of world may be shipped out from our warehouse in HongKong.
- 5.International Buyers C Please Note:
- a. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.
- b. Please check with your country customs office to determine what these additional costs will be prior to offerding/buying.
All of our brand new items come with a 30-Days money-back guarantee.
Q: How do I pay for my purchase?
A: We accept secure payments through Managed Payments.
Q: When will the item be shipped out?
A: This item will be shipped with 2 business day once payment completed.
Q: Where is my tracking number?
A: Please log on your account, click "my "-->"my summary", or open your email box and find the shipping notification email.
Q: How do I return an item?
A: My tore accepts returns. Items must be returned within 60 days. Refunds will be given as money back. Please contact our customer service before you return an item.
All right reserved.
