Introduction： Pari Front Air Suspension Spring Bags For Range Rover L405 Sport L494 2013-2019
Introduction：
Two front Air Suspesnion shock absorbers are connected from the front suspension to the chassis, and
two rear Air Suspension shock absorbers are attached between the rear suspension and the chassis. Shock
absorbers have three main purposes:
1. They control spring action and oscillations to provide the desired ride quality.
2. They help prevent body sway and lean while cornering.
3. They reduce the tendency of a tire tread to lift off the road, which improves tire life, traction, and directional stability.
Because Air suspension shock absorbers control spring action, spring oscillations, and chassis oscillations, they contribute to vehicle safety and passenger comfort. If the shock absorbers are
worn out, excessive chassis oscillations may occur, particularly on rough road surfaces. Th ese
excessive chassis oscillations may result in loss of steering control. Worn-out shock absorbers
also cause excessive body lean and sway while cornering, which may cause the driver to lose
control of the vehicle. Shock absorbers are extremely important to providing longer tire life
and improving vehicle handling, steering quality, and ride quality.
Air suspension Shock absorber design is matched to the defl ection rate of the coil spring to control the spring
action. Several diff erent types of shock absorbers are available for special service requirements.
Fitting the Followingvehicle:
Land Rover Range Rover
Autobiography Black Sport Utility 4-Door 5.0L 2014
Autobiography LWB Sport Utility 4-Door 5.0L 2017-2019
Autobiography Sport Utility 4-Door 5.0L 2013-2020
Autobiography Sport Utility 4-Door 2.0L 2020
Base Sport Utility 4-Door 5.0L 2013
Base Sport Utility 4-Door 3.0L 2014-2020
HSE Sport Utility 4-Door 5.0L 2013
HSE Sport Utility 4-Door 3.0L 2014-2020
HSE Sport Utility 4-Door 2.0L 2020
Supercharged Sport Utility 4-Door 5.0L 2013-2019
SV Autobiography Dynamic Sport Utility 4-Door 5.0L 2018-2020
SV Autobiography Sport Utility 4-Door 5.0L 2016-2020
Vogue SE Sport Utility 4-Door 5.0L 2013 2017
Vogue Sport Utility 4-Door 5.0L 2014-2016 2018-2019
Range Rover Sport
Autobiography Dynamic Sport Utility 4-Door 5.0L 2016 2018-2020
Autobiography Dynamic Sport Utility 4-Door 3.0L 2019
Autobiography Dynamic Sport Utility 4-Door 2.0L 2020
Autobiography Sport Utility 4-Door 5.0L 2014-2018
Base Sport Utility 4-Door 5.0L 2014-2016
HSE Dynamic Sport Utility 4-Door 5.0L 2019-2020
HSE Dynamic Sport Utility 4-Door 3.0L 2017-2019
HSE PHEV Sport Utility 4-Door 2.0L 2019
HSE Sport Utility 4-Door 5.0L 2017-2018
HSE Sport Utility 4-Door 3.0L 2014-2020
HSE Sport Utility 4-Door 2.0L 2020
HST Sport Utility 4-Door 3.0L 2016 2019 2020
S Sport Utility 4-Door 3.0L 2019
SE Sport Utility 4-Door 3.0L 2014-2020
Supercharged Dynamic Sport Utility 4-Door 5.0L 2016 2018 2019
Supercharged Sport Utility 4-Door 5.0L 2014-2018
SVR Sport Utility 4-Door 5.0L 2015-2020
Evolution Related：
Range Rover
Classic First generation (1970-1996)
P38A Second generation (1994-2002)
L322 Third generation (2002-2012)
L405 Fourth generation (2013-present)
Range Rover Sport
L320 First generation (2005-2013)
L494 Second generation (2013-present)
SVR (2015 Pre-Facelift)
SVR (2018 Facelift)
Advantage of Our Air Suspension:
-The Original Size
-Direct Replacement
-Perfect Fit
-Safe and Stable
-Longer Life
-Eliminating abnormal sound
-After-sales Guarantee
-Made of high quality raw materials, effectively reduce air leakage, strong sealing
-All parts are hand inspected off the line before packaging and once again by our team before shipment
-It has a high compressive strength and good sound insulation to ensure our driving comfort and safety
If you are interested with anyother air suspension parts, please click and saveour store
When Should We Replace Air Suspension:
- The car was subjected to excessive up, down, and left/right vibrations, nods during braking, and irregular tire wear
- An excessive tilt or swing of a car in a turn
- Wear or damage of final assembly housing, resulting in oil leakage of air suspension and affecting its performance
- If the car vibrates violently when it comes to an emergency stop while moving slowly
Common Air Suspension Failure Inspection:
1.Abnormal Sounds
When the air suspension strut is damaged,it will give out an abnormal sound.
2.Poor Handling Stability
When the car passes over a rough road ,it bumps and cannot keep steady.
3.Air Leakage
Leaking air、seal gasket failed.
4.Car Body Slant
Under the condition of poor road (Bumpy Road),the body will collapse.
5.Irregular Tire Wear
The air suspension sturt needs to be replaced if tyre surface has uneven wear marks.
6.Over Bend
When you turn to brakes,tilt faster and the steering wheel will fail.
Recommended replacement cycle:
Since the average annual distance of the car is 20,000 kilometers, the replacement frequency is obtained every 4years or 80.000km. In fact, the replacement frequency will vary depending on the car condition, road condition and shock absorber manufacturer.When driving a certain number of kilometers, we should take corresponding measures to ensure our driving safety.
- 20.000km: Please check your air suspension
- 80.000km: Need to replace your air suspension
- 100.000km: Please replace your air suspension as soon as possible
OEM Part Suspension Shock Absorber Operation:
Air Suspension Shock absorbers are usually mounted between the lower control arms and the chassis. When
a vehicle wheel strikes a bump, the wheel and suspension move upward in relation to the
chassis. Upward wheel movement is referred to as jounce travel. Th is jounce action causes
the spring to deflect or compress. Under this condition, the spring stores energy and springs
back downward with all the energy absorbed when it defl ected upward. Th is downward spring
and wheel action is called rebound travel. If this spring action were not controlled, the
wheel would strike the road with a strong downward force, and the wheel jounce would occur
again. Th erefore, some device must be installed to control the spring action, or the wheelwould bounce up and down many times after it hit a bump, causing passenger discomfort,
directional instability, and suspension component wear.
Shock absorbers are installed on suspension systems to control spring action. When a wheel
strikes a bump and jounce travel occurs, the shock absorber lower tube unit is forced upward.
Th is action forces the piston downward in the lower tube unit. Since oil cannot leak past the
piston, the oil in the lower unit is forced through the piston orifi ces or valves to the upper oil
chamber. These valves provide precise oil fl ow control and control the upward action of the wheel
and suspension, which is referred to as a shock absorber compression stroke (Figure 5-2).
When the spring expands downward in rebound travel, the lower shock absorber unit is
also forced downward. When this occurs, the piston moves upward in the lower tube unit,
and hydraulic oil is forced through the piston orifi ces or valves from the upper oil chamber to
the lower oil chamber. Since the valves restrict oil flow with precise control, the downward
suspension and wheel movement is controlled.
When the shock absorber piston moves, oil is forced through the piston. Since the piston
valves and orifi ces resist the fl ow of oil, friction and heat are created. Th e resistance of the oil
moving through the piston must be calibrated as closely as possible to the spring’s deflection
rate or strength. Wheels and suspension systems defl ect at many diff erent speeds, depending
on the type and size of bump and the vehicle speed. Th e resistance of a shock absorber piston
increases with the square of its speed. For example, if the wheel defl ection speed increases
four times, the piston resistance is sixteen times as great. Th erefore, if a wheel strikes a large
bump at high speed, the wheel defl ection and rebound can be eff ectively locked by the shock
absorber. Shock absorber engineers prevent this action by precisely designing shock absorbervalves and orifi ces to provide enough friction to prevent the spring from overextending on
the rebound stroke. Th ese piston valves and orifi ces must not create excessive friction, which
slows the wheel from returning to its original position.
Shock absorber pistons have many diff erent types of valves and orifi ces. In some pistons,
small orifi ces control the oil flow during slow wheel and suspension movements. Stacked steel
valves control the oil fl ow during medium speed wheel and suspension movements. During
maximum wheel and suspension movements, larger orifi ces between the piston valves provide oil fl ow control. On other shock absorber pistons, the stacked steel valves alone provide
oil flow control. Regardless of the piston orifi ce and valve design, the shock absorber must be
precisely matched to absorb the spring’s energy.
During fast upward wheel movement on the compression stroke, excessive pressure in
the lower oil chamber forces the base valve open and thus allows oil to fl ow through this valve
to the reservoir. Th e nitrogen gas provides a compensating space for the oil that is displaced
into the reservoir on the compression stroke and when the oil is heated. Since the gas exerts
pressure on the oil, cavitation, or foaming of the oil, is eliminated. When oil bubbles are
eliminated in this way, the shock absorber provides continuous damping for wheel defl ections as small as 0.078 in (2.0 mm). A rebound rubber is located on top of the piston. If the
wheel drops downward into a hole, the shock absorber may become fully extended. Under
this condition, the rebound rubber provides a cushioning action.
Package Includes:
Pair for Front Right andLeftAir Suspension Springs
Notes:
Of all the suspension components, shock absorbers and struts
contribute the most to ride quality. As the vehicle is driven over road irregularities,
the shock absorbers or struts are continually operating to control the spring action
and provide acceptable ride quality. It has been my experience that shock absorbers
and struts usually wear out fi rst in suspension systems, because they are working
every time a wheel strikes a road irregularity. Th erefore, you must understand not only shock absorber and strut operation but also how ride quality is aff ected if these componen
- Please double confirm the compatibility as well as the OEM number before purchasing.
- Instruction is not included. Professional installation is recommended.
Item SpecificsBrand gdcarpartsinManufacturer Part Number GD829490C01Included Hardware NoneMaximum Operating Pressure (psi) 195Minimum Operating Pressure (psi) 90Drive Layout Front Engine 4WDPlatform JLR D7uMaterial Iron Aluminium Alloy RubberColor Silver BlackType Air Suspension StrutCustom Bundle NoReturn Policy 30 Days Free ReturnManufacturer Warranty 1 YearQuantity PairFitment Type Direct ReplacementOE Spec or Performance/Custom OE SpecAdjustable YesFeatures SealedInterchange Part Number LR038801, LR038803, LR052774,LR072460,LR087092Other Part Number LR057251, LR060135,LR057257,LR060137Superseded Part Number LR072447, on Vehicle Right Left FrontSize Single Dimension(CM) Weight(KG) 4.50Feature ESCPFeature ESCP
Shipping 1. Orders processed within 24 hours of payment verification. (if you want cancel orders or change address pls contact us within 6 hours after payment, or we are not responsible for shipping a replacement.)2. Fast shipping: All our packages use USPS First Class/UPS/Fedex... Package Service3. If you have not received your shipment within 15 days from payment, please contact!Return 1.If you have a defected item under warranty, you can return it with 30 days after the pruchase date.2. All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable.3. We will refund your full winning offer amount, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER both Buyer and Seller cancel the transaction from . OR, you may choose to have a replacement.response 1. We strive for 100% customer satisfaction! response IS VERY IMPORTANT TO US.2. We request that you contact us immediately BEFORE you give us neutral or negative response, so that we can satisfactorily address your concerns.Payment 1. We accept multiple payment methods.2. If you want cancel orders or change address pls contact us within 6 hours after payment, or we are not responsible for shipping a replacement.3. Payment must be received within 10 days as sale ended or order might be delayed.Warranty 1. We stand behind every product we sell.2. We define the item as defective only if it doesn't function as described.3. It is the buyer's responsibility to understand the item description before offerding.4. Man-made damage by abuse or wrong operation is not covered by this warranty.5. Noproduct liability insurance is assumed.
Shop CategoryStore Home Mirror Parts◈Vehicle Mirrors◈Truck Mirrors◈Mirror Glasses & Other Parts Brake Parts◈Brake Rotors◈Brake Pads◈Brake Rotors + Pads Mass Air Flow Sensors Oxygen Sensors Cooling Parts◈Radiators◈Cooling Fans◈Fan Clutches AC Condensers Heater Cores Evaporators Wheel Hub Bearings Wheel Spacers Leveling Lift Kits Wheel Lug Nuts Knock Sensors Jack Stands Air Cleaner Filter Boxes Steering U-Joints Steering Shafts suspension kit◈cj Idle Air Control Valve 4 pcs wheel hub bearing Fender Flares ABS Speed Sensor Vehicle Speed Sensor Cargo Cover Hub Caps Pillar Posts Fuse Holder Box Brake System Parts◈Brake Pads & Brake Shoes◈Brake Calipers Radiator Support Tonneau Cover Wheel Hub Bearing Knuckle Window Visor Roof Rack Engine Timing Chain Kit Engine Timing Belt Kit Engine Repair Kit headlight assembly Harmonic Balancer Coolant Reservoir Thermostat Housing ATV Rear Wheel Axle car tool Bumper Complete Struts Fuel Injectors Coilovers Air Shock Shock Struts & Suspension Kit & Hubs Lift Support Horn Power Brake Booster Dipstick Ballast Module Air Dryer Timing Chain Kit Mud Flaps Protection Shield & Lift Kit Air Intake Snorkel Cylinder Piston Kit Motorcycle Exhaust Pipe Strut Mount Adjustable Rear Control Arm Metal heat shield sleeve Brake Drums& Brake Shoes steering knuckle-7 Window Regulator Winch Turbocharger Throttle Body Fuel Pump Transfer Case Shift Motor CV Axle Household Air Cooler Window Switch Bed Step Ignition Coils Driveshaft starter Stator Trailer Tools Spark Plug AC Compressor Airbag Hairspring Coil Spring Spoiler Front Bumper LIp Air Filter Steering Knuckle & Other Weatherstrip Seal Blower Motor alternator Catalytic Converter Engine Mount OtherHot Item (4) 2\" Hubcentric 6x5.5 Wheel Spacers For Chevy Silverado Tahoe GMC Sierra 1500 USD 104.60 (4) 2\" 5x5 Hubcentric Wheel Spacers For Jeep JK JKU Wrangler Grand Cherokee WK USD 102.58 (4) 1.5\" 8x6.5 to 8x180 Wheel Adapters Fits Chevy Silverado 2500 HD GMC Sierra USD 107.64 (4) 1.5\" Hubcentric Wheel Spacers 6x5.5 For Toyota Tacoma 4Runner Tundra Lexus USD 77.65 (4) 2\" Hubcentric Wheel Spacers 6x5.5 For Toyota Tacoma 4Runner Tundra Sequoia USD 103.59 Delivery
New List Item Fuel Pump Assembly For Jeep Compass 2.4L 2017-22 Renegade 1.3L 1.4L 2.4L 2015-21 USD 49.99 Suspension 8 x Control Arm Ball Joint Tie Rod Kit For Chevrolet Suburban 1500 USD 79.89 Rear Left Fits Hyundai Sonata 2006 2007 2008 2009 2010 Power Window Lift Motor USD 23.99 Brand 10 Set Upper Lower Control Arm Tie Rod Kit For 2001 2002 Honda Accord USD 73.69 For 1996-2002 Toyota For Corolla 4Pieces Outer & Inner Tie Rod End Steering Kit USD 36.58 Help & InfoPayment PolicyShipping PolicyReturn PolicyFAQAbout Us Pari Front Air Suspension Spring Bags For Range Rover L405 Sport L494 2013-2019
Introduction：
Two front Air Suspesnion shock absorbers are connected from the front suspension to the chassis, and
two rear Air Suspension shock absorbers are attached between the rear suspension and the chassis. Shock
absorbers have three main purposes:
1. They control spring action and oscillations to provide the desired ride quality.
2. They help prevent body sway and lean while cornering.
3. They reduce the tendency of a tire tread to lift off the road, which improves tire life, traction, and directional stability.
Because Air suspension shock absorbers control spring action, spring oscillations, and chassis oscillations, they contribute to vehicle safety and passenger comfort. If the shock absorbers are
worn out, excessive chassis oscillations may occur, particularly on rough road surfaces. Th ese
excessive chassis oscillations may result in loss of steering control. Worn-out shock absorbers
also cause excessive body lean and sway while cornering, which may cause the driver to lose
control of the vehicle. Shock absorbers are extremely important to providing longer tire life
and improving vehicle handling, steering quality, and ride quality.
Air suspension Shock absorber design is matched to the defl ection rate of the coil spring to control the spring
action. Several diff erent types of shock absorbers are available for special service requirements.
Fitting the Followingvehicle:
Land Rover Range Rover
Autobiography Black Sport Utility 4-Door 5.0L 2014
Autobiography LWB Sport Utility 4-Door 5.0L 2017-2019
Autobiography Sport Utility 4-Door 5.0L 2013-2020
Autobiography Sport Utility 4-Door 2.0L 2020
Base Sport Utility 4-Door 5.0L 2013
Base Sport Utility 4-Door 3.0L 2014-2020
HSE Sport Utility 4-Door 5.0L 2013
HSE Sport Utility 4-Door 3.0L 2014-2020
HSE Sport Utility 4-Door 2.0L 2020
Supercharged Sport Utility 4-Door 5.0L 2013-2019
SV Autobiography Dynamic Sport Utility 4-Door 5.0L 2018-2020
SV Autobiography Sport Utility 4-Door 5.0L 2016-2020
Vogue SE Sport Utility 4-Door 5.0L 2013 2017
Vogue Sport Utility 4-Door 5.0L 2014-2016 2018-2019
Range Rover Sport
Autobiography Dynamic Sport Utility 4-Door 5.0L 2016 2018-2020
Autobiography Dynamic Sport Utility 4-Door 3.0L 2019
Autobiography Dynamic Sport Utility 4-Door 2.0L 2020
Autobiography Sport Utility 4-Door 5.0L 2014-2018
Base Sport Utility 4-Door 5.0L 2014-2016
HSE Dynamic Sport Utility 4-Door 5.0L 2019-2020
HSE Dynamic Sport Utility 4-Door 3.0L 2017-2019
HSE PHEV Sport Utility 4-Door 2.0L 2019
HSE Sport Utility 4-Door 5.0L 2017-2018
HSE Sport Utility 4-Door 3.0L 2014-2020
HSE Sport Utility 4-Door 2.0L 2020
HST Sport Utility 4-Door 3.0L 2016 2019 2020
S Sport Utility 4-Door 3.0L 2019
SE Sport Utility 4-Door 3.0L 2014-2020
Supercharged Dynamic Sport Utility 4-Door 5.0L 2016 2018 2019
Supercharged Sport Utility 4-Door 5.0L 2014-2018
SVR Sport Utility 4-Door 5.0L 2015-2020
Evolution Related：
Range Rover
Classic First generation (1970-1996)
P38A Second generation (1994-2002)
L322 Third generation (2002-2012)
L405 Fourth generation (2013-present)
Range Rover Sport
L320 First generation (2005-2013)
L494 Second generation (2013-present)
SVR (2015 Pre-Facelift)
SVR (2018 Facelift)
Advantage of Our Air Suspension:
-The Original Size
-Direct Replacement
-Perfect Fit
-Safe and Stable
-Longer Life
-Eliminating abnormal sound
-After-sales Guarantee
-Made of high quality raw materials, effectively reduce air leakage, strong sealing
-All parts are hand inspected off the line before packaging and once again by our team before shipment
-It has a high compressive strength and good sound insulation to ensure our driving comfort and safety
If you are interested with anyother air suspension parts, please click and saveour store
When Should We Replace Air Suspension:
- The car was subjected to excessive up, down, and left/right vibrations, nods during braking, and irregular tire wear
- An excessive tilt or swing of a car in a turn
- Wear or damage of final assembly housing, resulting in oil leakage of air suspension and affecting its performance
- If the car vibrates violently when it comes to an emergency stop while moving slowly
Common Air Suspension Failure Inspection:
1.Abnormal Sounds
When the air suspension strut is damaged,it will give out an abnormal sound.
2.Poor Handling Stability
When the car passes over a rough road ,it bumps and cannot keep steady.
3.Air Leakage
Leaking air、seal gasket failed.
4.Car Body Slant
Under the condition of poor road (Bumpy Road),the body will collapse.
5.Irregular Tire Wear
The air suspension sturt needs to be replaced if tyre surface has uneven wear marks.
6.Over Bend
When you turn to brakes,tilt faster and the steering wheel will fail.
Recommended replacement cycle:
Since the average annual distance of the car is 20,000 kilometers, the replacement frequency is obtained every 4years or 80.000km. In fact, the replacement frequency will vary depending on the car condition, road condition and shock absorber manufacturer.When driving a certain number of kilometers, we should take corresponding measures to ensure our driving safety.
- 20.000km: Please check your air suspension
- 80.000km: Need to replace your air suspension
- 100.000km: Please replace your air suspension as soon as possible
OEM Part Suspension Shock Absorber Operation:
Air Suspension Shock absorbers are usually mounted between the lower control arms and the chassis. When
a vehicle wheel strikes a bump, the wheel and suspension move upward in relation to the
chassis. Upward wheel movement is referred to as jounce travel. Th is jounce action causes
the spring to deflect or compress. Under this condition, the spring stores energy and springs
back downward with all the energy absorbed when it defl ected upward. Th is downward spring
and wheel action is called rebound travel. If this spring action were not controlled, the
wheel would strike the road with a strong downward force, and the wheel jounce would occur
again. Th erefore, some device must be installed to control the spring action, or the wheelwould bounce up and down many times after it hit a bump, causing passenger discomfort,
directional instability, and suspension component wear.
Shock absorbers are installed on suspension systems to control spring action. When a wheel
strikes a bump and jounce travel occurs, the shock absorber lower tube unit is forced upward.
Th is action forces the piston downward in the lower tube unit. Since oil cannot leak past the
piston, the oil in the lower unit is forced through the piston orifi ces or valves to the upper oil
chamber. These valves provide precise oil fl ow control and control the upward action of the wheel
and suspension, which is referred to as a shock absorber compression stroke (Figure 5-2).
When the spring expands downward in rebound travel, the lower shock absorber unit is
also forced downward. When this occurs, the piston moves upward in the lower tube unit,
and hydraulic oil is forced through the piston orifi ces or valves from the upper oil chamber to
the lower oil chamber. Since the valves restrict oil flow with precise control, the downward
suspension and wheel movement is controlled.
When the shock absorber piston moves, oil is forced through the piston. Since the piston
valves and orifi ces resist the fl ow of oil, friction and heat are created. Th e resistance of the oil
moving through the piston must be calibrated as closely as possible to the spring’s deflection
rate or strength. Wheels and suspension systems defl ect at many diff erent speeds, depending
on the type and size of bump and the vehicle speed. Th e resistance of a shock absorber piston
increases with the square of its speed. For example, if the wheel defl ection speed increases
four times, the piston resistance is sixteen times as great. Th erefore, if a wheel strikes a large
bump at high speed, the wheel defl ection and rebound can be eff ectively locked by the shock
absorber. Shock absorber engineers prevent this action by precisely designing shock absorbervalves and orifi ces to provide enough friction to prevent the spring from overextending on
the rebound stroke. Th ese piston valves and orifi ces must not create excessive friction, which
slows the wheel from returning to its original position.
Shock absorber pistons have many diff erent types of valves and orifi ces. In some pistons,
small orifi ces control the oil flow during slow wheel and suspension movements. Stacked steel
valves control the oil fl ow during medium speed wheel and suspension movements. During
maximum wheel and suspension movements, larger orifi ces between the piston valves provide oil fl ow control. On other shock absorber pistons, the stacked steel valves alone provide
oil flow control. Regardless of the piston orifi ce and valve design, the shock absorber must be
precisely matched to absorb the spring’s energy.
During fast upward wheel movement on the compression stroke, excessive pressure in
the lower oil chamber forces the base valve open and thus allows oil to fl ow through this valve
to the reservoir. Th e nitrogen gas provides a compensating space for the oil that is displaced
into the reservoir on the compression stroke and when the oil is heated. Since the gas exerts
pressure on the oil, cavitation, or foaming of the oil, is eliminated. When oil bubbles are
eliminated in this way, the shock absorber provides continuous damping for wheel defl ections as small as 0.078 in (2.0 mm). A rebound rubber is located on top of the piston. If the
wheel drops downward into a hole, the shock absorber may become fully extended. Under
this condition, the rebound rubber provides a cushioning action.
Package Includes:
Pair for Front Right andLeftAir Suspension Springs
Notes:
Of all the suspension components, shock absorbers and struts
contribute the most to ride quality. As the vehicle is driven over road irregularities,
the shock absorbers or struts are continually operating to control the spring action
and provide acceptable ride quality. It has been my experience that shock absorbers
and struts usually wear out fi rst in suspension systems, because they are working
every time a wheel strikes a road irregularity. Th erefore, you must understand not only shock absorber and strut operation but also how ride quality is aff ected if these componen
- Please double confirm the compatibility as well as the OEM number before purchasing.
- Instruction is not included. Professional installation is recommended.
Item SpecificsBrand :gdcarpartsinManufacturer Part Number :GD829490C01Included Hardware :NoneMaximum Operating Pressure (psi) :195Minimum Operating Pressure (psi) :90Drive Layout :Front Engine 4WDPlatform :JLR D7uMaterial :Iron Aluminium Alloy RubberColor :Silver BlackType :Air Suspension StrutCustom Bundle :NoReturn Policy :30 Days Free ReturnManufacturer Warranty :1 YearQuantity :PairFitment Type :Direct ReplacementOE Spec or Performance/Custom :OE SpecAdjustable :YesFeatures :SealedInterchange Part Number :LR038801, LR038803, LR052774,LR072460,LR087092Other Part Number :LR057251, LR060135,LR057257,LR060137Superseded Part Number :LR072447, on Vehicle :Right Left FrontSize :Single Dimension(CM) Weight(KG) :4.50Feature :ESCPFeature :ESCP
ShippingReturnresponsePaymentWarranty 1. Orders processed within 24 hours of payment verification. (if you want cancel orders or change address pls contact us within 6 hours after payment, or we are not responsible for shipping a replacement.)2. Fast shipping: All our packages use USPS First Class/UPS/Fedex... Package Service3. If you have not received your shipment within 15 days from payment, please contact! 1.If you have a defected item under warranty, you can return it with 30 days after the pruchase date.2. All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable.3. We will refund your full winning offer amount, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER both Buyer and Seller cancel the transaction from . OR, you may choose to have a replacement. 1. We strive for 100% customer satisfaction! response IS VERY IMPORTANT TO US.2. We request that you contact us immediately BEFORE you give us neutral or negative response, so that we can satisfactorily address your concerns. 1. We accept multiple payment methods.2. If you want cancel orders or change address pls contact us within 6 hours after payment, or we are not responsible for shipping a replacement.3. Payment must be received within 10 days as sale ended or order might be delayed. 1. We stand behind every product we sell.2. We define the item as defective only if it doesn't function as described.3. It is the buyer's responsibility to understand the item description before offerding.4. Man-made damage by abuse or wrong operation is not covered by this warranty.5. Noproduct liability insurance is assumed.
All rights reserved.
